Tork Craft Sabre Saw Blade 200 X 2.5Mm 10Tpi Wood, Metal, Pvc,Al 2Pc
R104,00
Tork Craft Sabre Saw Blade — 200 mm × 2.5 mm (10 TPI) Wood/Metal/PVC/Al (2-Pack)
Packaging: Carded (2 blades per pack)
A versatile 200 mm reciprocating saw blade from Tork Craft with a 2.5 mm pitch (10 TPI), designed to deliver robust performance in wood, light metal, PVC and aluminium profiles. The 2-pack format gives you a spare ready so you don’t stop mid-job.
Free shipping on orders over R2000!
- Satisfaction Guaranteed
- Quality Spares, Accessories & Tools
- Secure Payments
Description
Tork Craft Sabre Saw Blade — 200 mm × 2.5 mm (10 TPI) Wood/Metal/PVC/Al (2-Pack)
Packaging: Carded (2 blades per pack)
A versatile 200 mm reciprocating saw blade from Tork Craft with a 2.5 mm pitch (10 TPI), designed to deliver robust performance in wood, light metal, PVC and aluminium profiles. The 2-pack format gives you a spare ready so you don’t stop mid-job.
Specifications
| Description | Spec |
|---|---|
| Brand | Tork Craft |
| Cat No. | TC T1022HF-2 |
| Product Type | Sabre/Reciprocating Saw Blade |
| Length | 200 mm |
| Effective Tooth Pitch | 2.5 mm (10 TPI) |
| Blade Thickness | ~0.9 mm |
| Suitable Materials | Wood, Thin Metal, PVC, Aluminium |
| Pack Quantity | 2 (carded) |
| Barcode (EAN) | 6009515888107 |
Features
- 200 mm length — good reach for pipe cuts, profiles and fixtures.
- 2.5 mm tooth pitch / 10 TPI — fine enough to cut through metal/PVC and coarse enough not to bog in wood.
- Blade thickness approx. 0.9 mm — sturdy body for controlled cuts.
- Suitable for wood, thin metal, PVC, aluminium — one blade for multiple materials.
- Pack of 2 — for value and convenience on site.
Benefits
- Less change-over: One blade handles wood and metal, reducing the need to swap blades mid-job.
- Cleaner cuts: The 10 TPI pitch improves finish in ductwork, profile cuts and PVC compared to very coarse blades.
- Backup ready: With 2 pieces, you’re prepared when one dulls or breaks during busy install jobs.
Extra Information
- Clamp or secure thin sheet materials and support both sides of the cut to reduce vibration and avoid chatter.
- For mixed material cuts (e.g., wood with embedded nails), go steady and let the blade track rather than forcing it — it helps extend blade life.
- Keep saw stroke steady and moderate when cutting aluminium or PVC to avoid melting or gumming the teeth.
Pro Tip
- When cutting aluminium profiles or PVC-lined channel, mask the cut line with tape and lead the blade slowly into the edge — this helps prevent tear-out and gives a cleaner visible finish.
Safety
- Wear eye and ear protection when using reciprocating sawing — chips and shards can fly.
- Ensure correct blade is clamped and material is supported at both ends to reduce kickback.
- Wait for full stop before removing blade or unplugging the tool.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.