Showing 1–16 of 859 resultsSorted by latest
-
R10 924,20
Stages: Sinter, Fine & Carbon
A three-stage filter system, composed of sinter, fine, and carbon filters, is designed to effectively remove
impurities from air or liquid. While gauges are often used to monitor filter performance, this system can function
without them.
1. Sinter Filter
- Purpose: Removes larger particles and debris.
- Material: Typically made of sintered metal or ceramic.
- Function: The porous structure of the sinter material traps larger particles, preventing them from passing
through to the subsequent filters.
2. Fine Filter
- Purpose: Removes smaller particles and contaminants.
- Material: Often made of a woven or nonwoven material, such as fiberglass or polyester.
- Function: The fine mesh of the material captures smaller particles that were not removed by the sinter filter.
3. Carbon Filter
- Purpose: Absorbs gases, odors, and volatile organic compounds (VOCs).
- Material: Activated carbon, a highly porous material with a large surface area.
- Function: The carbon particles adsorb various contaminants, effectively purifying the air or liquid.
Application:
- Solvent-based paints
- Breathing protection equipment
- Automotive
- Waterborne, paint spray guns
- DIY
- Removes oil and water (Sintered filter)
- Removes micro dirt (Fine filter)
- Removes oil steam and smells (Activated charcoal filter)
-
R8 892,35
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with an automatic mixing paddle to automatically agitate the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R8 022,40
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R4 967,08
30m retractable air hose reel that is portable.
The hose is quickly and properly reeled up after use.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose, just reel up the hose when finished working.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R4 924,76
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R4 899,09
AIR NAILER 16G T-NAILER 19MM-50MM BRAD NAIL 100PC CAP (T50) PROF
-
R4 535,01
Specially designed hose for cold temperatures, to be able to withstand up to -40°C.
The hose is 40% lighter than rubber hose.
The orange colour makes it more visible in the workplace.
Inner braided reinforcing allows for air pressure up to 62 Bar (900 Psi).
Colour: Orange
Dimensions:
- Inside diameter: 10mm
- Outside diameter: 17mm
- Length: 100m
-
R4 476,28
Professional pneumatic angle grinder for ø 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil.
-
R3 047,61
AirCraft Stapler 21g 12.7mm Crown Uses 6mm–25mm Staples (AT0028)
At a Glance: 21 gauge stapler with 12.7mm crown, compatible with 6mm to 25mm staples for clean, fast fastening.
The AirCraft AT0028 pneumatic stapler is built for quick, tidy fastening when you want a professional finish with less effort.
Designed for 21 gauge staples with a 12.7mm crown, it accepts staple lengths from 6mm right up to 25mm—making it a versatile go-to for light to medium-duty fixing work.
Whether you’re securing fabric, fixing thin timber, assembling lightweight panels, or working on trims and general workshop tasks, this air stapler delivers consistent driving power with the speed you only get from pneumatic tools.
Professional fastening range in one compact stapler
With compatibility across 6mm–25mm staple lengths, the AT0028 gives you flexibility for different material thicknesses and applications.
Use shorter staples for neat, low-profile work, and step up the length when you need more bite—without swapping tools.
-
R2 374,05
Retractable air hose reel in plastic casing able to swivel on a wall mount.
The hose is quickly and properly reeled up after use by using an automatic winding system.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose in the workshop, just reel up the hose when finished working.
The swivel can rotate 180 degrees.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R2 089,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 800,25
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Manual
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 725,34
The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber bumper is fitted to protect the wood surface. The nail gun has added
safety where it it will only drive-in a nail when the bumper is depressed
against the wooden surface.
Max length of nail: 50mm
Magazine capacity: 100 nails
Only use 16 Gauge nails.
-
R1 722,35
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy-duty ball bearing construction for improved lower vibration performance.
Includes a dust extraction port
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil.
Recommended replacement backing pad:
SPC00107
-
R1 662,50
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 614,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
