Showing 1–16 of 785 resultsSorted by latest
-
R10 924,20
Stages: Sinter, Fine & Carbon
A three-stage filter system, composed of sinter, fine, and carbon filters, is designed to effectively remove
impurities from air or liquid. While gauges are often used to monitor filter performance, this system can function
without them.
1. Sinter Filter
- Purpose: Removes larger particles and debris.
- Material: Typically made of sintered metal or ceramic.
- Function: The porous structure of the sinter material traps larger particles, preventing them from passing
through to the subsequent filters.
2. Fine Filter
- Purpose: Removes smaller particles and contaminants.
- Material: Often made of a woven or nonwoven material, such as fiberglass or polyester.
- Function: The fine mesh of the material captures smaller particles that were not removed by the sinter filter.
3. Carbon Filter
- Purpose: Absorbs gases, odors, and volatile organic compounds (VOCs).
- Material: Activated carbon, a highly porous material with a large surface area.
- Function: The carbon particles adsorb various contaminants, effectively purifying the air or liquid.
Application:
- Solvent-based paints
- Breathing protection equipment
- Automotive
- Waterborne, paint spray guns
- DIY
- Removes oil and water (Sintered filter)
- Removes micro dirt (Fine filter)
- Removes oil steam and smells (Activated charcoal filter)
-
R8 022,40
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R6 399,52
AirCraft 10 Litre Automatic Mix Paint Pot Only (SG PP10-2)
At a Glance: 10L pressure-fed paint pot with automatic mixing—keeps coatings consistent for smoother spray delivery (pot only).
When you’re spraying larger jobs, consistency is everything. The AirCraft SG PP10-2 10 Litre Automatic Mix Paint Pot is designed to keep your coating properly mixed and pressure-fed, so the material reaching your spray gun stays consistent from start to finish.
Automatic mixing helps reduce pigment settling and thickening, making it easier to maintain a stable spray pattern, smoother flow, and fewer interruptions for re-stirring.
This listing is for the paint pot only—ideal as a replacement unit or for building/servicing an existing pressure-fed spray setup.
Standout feature: Automatic mixing for consistent pressure-fed spraying
Keeps paint and coatings more uniform during use, helping improve finish quality and reducing the downtime and frustration caused by settling and inconsistent material flow.
-
R4 967,08
30m retractable air hose reel that is portable.
The hose is quickly and properly reeled up after use.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose, just reel up the hose when finished working.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R4 924,76
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R4 899,09
AIR NAILER 16G T-NAILER 19MM-50MM BRAD NAIL 100PC CAP (T50) PROF
-
R4 535,01
Specially designed hose for cold temperatures, to be able to withstand up to -40°C.
The hose is 40% lighter than rubber hose.
The orange colour makes it more visible in the workplace.
Inner braided reinforcing allows for air pressure up to 62 Bar (900 Psi).
Colour: Orange
Dimensions:
- Inside diameter: 10mm
- Outside diameter: 17mm
- Length: 100m
-
R4 476,28
Professional pneumatic angle grinder for ø 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil.
-
R3 348,56
AirCraft SG-COMP13 Mini Air Battery Compressor & A130 Airbrush Kit
At a Glance: All-in-one portable airbrush kit with battery mini compressor, A130 airbrush, paints, stencils and carry case.
The AirCraft SG-COMP13 is a compact, go-anywhere airbrush kit built for clean, controlled spraying without needing a big workshop compressor.
You get a battery-powered mini air compressor paired with an A130 airbrush, plus a handy selection of paints and stencils so you can start creating straight away.
Ideal for hobby work, crafts, touch-ups, models, signage-style details and creative finishes—this kit is all about neat application, smoother gradients, and better control than brushes or aerosols.
Portable Airbrush Freedom: SG-COMP13 Makes Neat Spraying Simple
When you want controlled spray work without dragging out heavy gear, a mini battery compressor and airbrush combo is the sweet spot.
Pack it in the carry case, set up in minutes, and spray with precision—perfect for detail work, patterns, and consistent coverage.
Included in the kit:
- Aluminium case
- (x5) paints
- 12V battery airbrush compressor
- (x6) stencils
- Airbrush
- Filter
- Wrench/spanner
- Eye dropper to transfer paint to airbrush
-
R2 451,81
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 – 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:
- 12V, 2000 mah
- Fully charge time: Around 4 hours
- Working time: 90 minutes
Spare battery –
SG COMP13-1
Airbrush included
-
R2 374,05
Retractable air hose reel in plastic casing able to swivel on a wall mount.
The hose is quickly and properly reeled up after use by using an automatic winding system.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose in the workshop, just reel up the hose when finished working.
The swivel can rotate 180 degrees.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R2 260,15
The compressor is designed to be small and compact using a 1/4 Hp motor to be able to inflate tyres up to a max pressure of 3.5 Bar (50 Psi).
The compressor is not suitable for airbrushing.
-
R2 089,05
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
-
R1 725,34
The nail gun makes use of 16 Gauge thickness brad nails and it is mostly used
in the cabinet making & trim carpentry industries to resemble panel pins.
The nail gun is light in weight, with an ergonomically shaped handle that is
easy to grip.
A rubber bumper is fitted to protect the wood surface. The nail gun has added
safety where it it will only drive-in a nail when the bumper is depressed
against the wooden surface.
Max length of nail: 50mm
Magazine capacity: 100 nails
Only use 16 Gauge nails.
-
R1 722,35
Professional pneumatic random orbital sander with Ø 150mm Hook & Loop
sanding pad.
Heavy-duty ball bearing construction for improved lower vibration performance.
Includes a dust extraction port
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil.
Recommended replacement backing pad:
SPC00107
-
R1 662,50
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set pressure.
The lubricator atomizes and mixes pneumatic oil with the compressed air to
lubricate air tools.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
Drain: Zero pressure drain
A push-in fitting is located on the drain to allow fluid to drain to a central point via PU tubing (not included).
Do not use a lubricator in line when using a spray gun.
