Showing 1–16 of 836 resultsSorted by latest
-
R12 700,62
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with an automatic mixing paddle to automatically agitate the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R10 924,20
Stages: Sinter, Fine & Carbon
A three-stage filter system, composed of sinter, fine, and carbon filters, is designed to effectively remove
impurities from air or liquid. While gauges are often used to monitor filter performance, this system can function
without them.
1. Sinter Filter
- Purpose: Removes larger particles and debris.
- Material: Typically made of sintered metal or ceramic.
- Function: The porous structure of the sinter material traps larger particles, preventing them from passing
through to the subsequent filters.
2. Fine Filter
- Purpose: Removes smaller particles and contaminants.
- Material: Often made of a woven or nonwoven material, such as fiberglass or polyester.
- Function: The fine mesh of the material captures smaller particles that were not removed by the sinter filter.
3. Carbon Filter
- Purpose: Absorbs gases, odors, and volatile organic compounds (VOCs).
- Material: Activated carbon, a highly porous material with a large surface area.
- Function: The carbon particles adsorb various contaminants, effectively purifying the air or liquid.
Application:
- Solvent-based paints
- Breathing protection equipment
- Automotive
- Waterborne, paint spray guns
- DIY
- Removes oil and water (Sintered filter)
- Removes micro dirt (Fine filter)
- Removes oil steam and smells (Activated charcoal filter)
-
R8 892,35
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with an automatic mixing paddle to automatically agitate the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R8 296,38
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R8 022,40
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R6 399,52
AirCraft 10 Litre Automatic Mix Paint Pot Only (SG PP10-2)
At a Glance: 10L pressure-fed paint pot with automatic mixing—keeps coatings consistent for smoother spray delivery (pot only).
When you’re spraying larger jobs, consistency is everything. The AirCraft SG PP10-2 10 Litre Automatic Mix Paint Pot is designed to keep your coating properly mixed and pressure-fed, so the material reaching your spray gun stays consistent from start to finish.
Automatic mixing helps reduce pigment settling and thickening, making it easier to maintain a stable spray pattern, smoother flow, and fewer interruptions for re-stirring.
This listing is for the paint pot only—ideal as a replacement unit or for building/servicing an existing pressure-fed spray setup.
Standout feature: Automatic mixing for consistent pressure-fed spraying
Keeps paint and coatings more uniform during use, helping improve finish quality and reducing the downtime and frustration caused by settling and inconsistent material flow.
-
R6 379,10
AirCraft Air Brush Power Palette
At a Glance; Handy paint mixing palette for blending and preparing small batches for airbrushing
Airbrushing loves small, repeatable paint mixes—and that’s exactly where a dedicated palette earns its keep. The AirCraft SG-BD-821 Air Brush Power Palette is a practical mixing aid designed for preparing and blending small amounts of paint before loading your airbrush. Whether you’re matching a touch-up colour, thinning paint to the right consistency, or building a gradient mix for shading, this palette helps you stay organised and keep your workflow clean and controlled.
Mix smarter for more consistent spraying
Mixing on a dedicated palette makes it easier to control paint ratios, test colour strength, and keep batches consistent—especially useful for detail work and repeat jobs.
-
R4 967,08
30m retractable air hose reel that is portable.
The hose is quickly and properly reeled up after use.
No more knotted and twisted hoses, the polyurethane hose has very good durability. No more tripping over hose, just reel up the hose when finished working.
Great for general air tools:
- Air duster
- Tyre inflator
- Paraffin gun
-
R4 924,76
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer’s data sheet.
The pot is fitted with a manual mixing paddle used for manually agitating the
paint to prevent it from separating.
Accessories to use with paint pot:
The paint pot is supplied
separately from the spray gun, fluid and air hose.
-
R4 899,09
AIR NAILER 16G T-NAILER 19MM-50MM BRAD NAIL 100PC CAP (T50) PROF
-
R4 535,01
Specially designed hose for cold temperatures, to be able to withstand up to -40°C.
The hose is 40% lighter than rubber hose.
The orange colour makes it more visible in the workplace.
Inner braided reinforcing allows for air pressure up to 62 Bar (900 Psi).
Colour: Orange
Dimensions:
- Inside diameter: 10mm
- Outside diameter: 17mm
- Length: 100m
-
R4 476,28
Professional pneumatic angle grinder for ø 180mm cutting and grinding discs.
A compressor is required with an air flow delivery of at least 2040 l/min at
6.3 Bar to make use of the angle grinder
Make sure that an in-line lubricator is fitted with pneumatic oil.
-
R3 582,41
The compressor is designed for airbrush use. Although it doesn’t have a tank,
it will switch off when it has reached its output pressure and will switch on
when in use.
A filter and water trap is fitted to ensure the media in the airbrush isn’t
contaminated with dust or water.
The oil-less piston motor is thermally protected and is maintenance free and
runs at a low noise ≤ 50dB.
The airbrush compressor is designed for artists who demand a quality finish.
-
R3 348,56
AirCraft SG-COMP13 Mini Air Battery Compressor & A130 Airbrush Kit
At a Glance: All-in-one portable airbrush kit with battery mini compressor, A130 airbrush, paints, stencils and carry case.
The AirCraft SG-COMP13 is a compact, go-anywhere airbrush kit built for clean, controlled spraying without needing a big workshop compressor.
You get a battery-powered mini air compressor paired with an A130 airbrush, plus a handy selection of paints and stencils so you can start creating straight away.
Ideal for hobby work, crafts, touch-ups, models, signage-style details and creative finishes—this kit is all about neat application, smoother gradients, and better control than brushes or aerosols.
Portable Airbrush Freedom: SG-COMP13 Makes Neat Spraying Simple
When you want controlled spray work without dragging out heavy gear, a mini battery compressor and airbrush combo is the sweet spot.
Pack it in the carry case, set up in minutes, and spray with precision—perfect for detail work, patterns, and consistent coverage.
Included in the kit:
- Aluminium case
- (x5) paints
- 12V battery airbrush compressor
- (x6) stencils
- Airbrush
- Filter
- Wrench/spanner
- Eye dropper to transfer paint to airbrush
-
R3 047,61
AirCraft Stapler 21g 12.7mm Crown Uses 6mm–25mm Staples (AT0028)
At a Glance: 21 gauge stapler with 12.7mm crown, compatible with 6mm to 25mm staples for clean, fast fastening.
The AirCraft AT0028 pneumatic stapler is built for quick, tidy fastening when you want a professional finish with less effort.
Designed for 21 gauge staples with a 12.7mm crown, it accepts staple lengths from 6mm right up to 25mm—making it a versatile go-to for light to medium-duty fixing work.
Whether you’re securing fabric, fixing thin timber, assembling lightweight panels, or working on trims and general workshop tasks, this air stapler delivers consistent driving power with the speed you only get from pneumatic tools.
Professional fastening range in one compact stapler
With compatibility across 6mm–25mm staple lengths, the AT0028 gives you flexibility for different material thicknesses and applications.
Use shorter staples for neat, low-profile work, and step up the length when you need more bite—without swapping tools.
-
R2 451,81
The compressor can be used for airbrushing, running from a supplied 12 V battery or from mains electricity.
Suitable for airbrushes with nozzle size Ø 0.2 – 0.5mm
Auto start stop function for continuous work, will maintain pressure at an
auto start of 15 Psi and stop at 25 Psi. Working pressure is 15 Psi
continuously.
Designed to be portable and fits in supplied waist bag.
Battery details:
- 12V, 2000 mah
- Fully charge time: Around 4 hours
- Working time: 90 minutes
Spare battery –
SG COMP13-1
Airbrush included
