Showing 449–464 of 785 resultsSorted by latest
-
R184,00
AirCraft O-ring Kit For SG-A137 (SG-A137-01)
At a Glance: Complete O-ring replacement kit for AirCraft SG-A137 spray gun sealing points
A spray gun depends on tight sealing to keep pressure stable and paint flowing where it should. The AirCraft SG-A137-01 O-ring Kit is a practical service solution
for refreshing worn seals on your SG-A137 spray gun, helping prevent air leaks, paint seepage and inconsistent spray performance. Whether you’re doing preventative
maintenance or fixing a troublesome leak, this kit helps restore smooth operation and reliable results.
Dedicated seal service kit for the SG-A137 spray gun
O-rings are small parts with a big job—keeping joints sealed, controls moving smoothly and pressure behaving properly. Replacing tired O-rings is one of the
simplest ways to improve reliability, especially on spray guns that are used often or cleaned regularly with solvents.
-
R184,00
AirCraft PU Hose Fitting Valve 8mm x 1/4" Male Thread (SG HVSF02-08)
At a Glance: Inline adjustable flow control valve with 8mm push-in tube fitting and 1/4" male thread connection.
The AirCraft SG HVSF02-08 PU hose fitting valve is a compact, reliable way to control airflow in your pneumatic setup.
With an 8mm push-in tube connection and a 1/4" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and pneumatic circuits where smooth response and repeatable control are important.
Adjust the knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for smoother pneumatic performance
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially handy for controlling actuator speed, softening tool response, or stabilising air delivery in a line.
The flow direction marking helps you install it correctly for consistent control.
-
R182,00
AirCraft PU Hose Fitting Valve 6mm x 1/8" Male Thread (SG HVSF01-06)
At a Glance: Inline adjustable flow control valve with 6mm push-in tube fitting and 1/8" male thread connection.
The AirCraft SG HVSF01-06 PU hose fitting valve is a compact, practical way to fine-tune airflow in your pneumatic setup.
Designed with a 6mm push-in tube connection and a 1/8" male thread, it installs quickly and gives you easy, repeatable control of air flow to cylinders, tools, blow guns and other air-driven accessories.
Turn the adjustment knob to dial in the flow rate, reduce sudden surges, and get smoother, more controlled operation where it counts.
Simple airflow control for cleaner pneumatic performance
This fitting-style valve works as an inline flow controller, letting you restrict or adjust air flow with a quick twist.
It’s especially useful when you want to slow an actuator, reduce aggressive tool response, or stabilise air delivery.
The flow direction indicator helps you install it correctly for predictable results.
-
R181,00
AirCraft Metal Flow Control 8mm x 1/4" Male Thread (SG MSC08-02)
At a Glance: Precision metal flow control valve with 8mm push-in tube port and 1/4" male thread—dial in stable airflow and smoother pneumatic motion.
If your pneumatic system needs controlled airflow instead of full-volume chaos, the AirCraft SG MSC08-02 Metal Flow Control is the small part that makes a big difference.
It connects 8mm PU tubing via a push-in port to a 1/4" male threaded connection, giving you adjustable airflow for better cylinder speed control, smoother movement, and more predictable compressed air performance.
Durable metal construction and an easy-to-adjust design make it ideal for workshop and machine pneumatics where reliability matters.
Standout feature: Fine airflow adjustment for consistent pneumatic speed control
Tune airflow precisely to reduce jolts, improve repeatability, and keep actuators and air circuits running smoothly under working pressure.
-
R181,00
AirCraft Metal Flow Control 8mm x 1/8" Male Thread (SG MSC08-01)
At a Glance: Precision metal flow control valve with 8mm push-in tube port and 1/8" male thread—dial in smooth airflow and consistent pneumatic motion.
When you need a pneumatic line that behaves with calm precision, the AirCraft SG MSC08-01 Metal Flow Control is your fine-adjustment friend.
It connects 8mm PU tubing via a push-in port to a 1/8" male threaded connection, letting you tune airflow for smoother actuator movement, controlled air delivery, and more stable compressed air performance.
It’s compact, durable, and built for real workshop conditions—because “close enough†is how air systems get noisy.
Standout feature: Accurate airflow adjustment for stable speed control
Restrict airflow in controlled steps to reduce jolts, improve repeatability, and keep cylinders and air circuits running smoothly and predictably.
-
R179,00
AirCraft PU Hose Fitting Valve 8mm x 1/8" Male Thread (SG HVSF01-08)
At a Glance: Inline adjustable flow control valve with 8mm push-in tube fitting and 1/8" male thread connection.
The AirCraft SG HVSF01-08 PU hose fitting valve gives you quick, hands-on control over airflow in your pneumatic system.
With an 8mm push-in tube connection on one side and a 1/8" male threaded connection on the other, it’s ideal for controlling air delivery to cylinders, air tools, blow lines, and general pneumatic circuits.
Adjust the knob to fine-tune flow, helping reduce aggressive starts, smooth actuator movement, and keep air-driven equipment behaving predictably.
Compact inline control for smoother air delivery
This fitting-style valve functions as an inline flow controller (often used as a speed controller on pneumatic actuators).
It allows you to restrict or adjust airflow with a simple twist, helping you balance speed and control without changing the rest of your setup.
The flow direction indicator assists correct installation for consistent results.
-
R178,00
AirCraft Metal Flow Control 6mm x 1/4" Male Thread (SG MSC06-02)
At a Glance: Precision metal flow control valve with 6mm push-in tube port and 1/4" male thread—dial in smooth pneumatic speed control.
Sometimes the best upgrade to a pneumatic system isn’t bigger—it’s smarter. The AirCraft SG MSC06-02 Metal Flow Control helps you fine-tune airflow so cylinders, actuators, and air circuits move smoothly and consistently.
With a 6mm push-in tube connection and a 1/4" male threaded port, it’s a practical choice for control panels, machine pneumatics, and workshop air setups where you want stable performance instead of sudden air-powered surprises.
Standout feature: Accurate airflow adjustment for repeatable pneumatic performance
Make small, controlled changes to airflow to reduce jolts, improve motion control, and get more predictable results from your compressed air system.
-
R178,00
AirCraft Metal Flow Control 6mm x 1/8" Male Thread (SG MSC06-01)
At a Glance: Precision metal flow control valve with 6mm push-in tube port and 1/8" male thread—fine-tune airflow for smoother pneumatic performance.
Pneumatics is basically “air with opinionsâ€â€”and the AirCraft SG MSC06-01 helps you keep those opinions under control.
This metal flow control valve connects a 6mm PU tube to a 1/8" male threaded port, giving you adjustable airflow where it matters most: cylinder speed control, stabilising air circuits, and reducing harsh bursts of air.
Compact, durable, and easy to dial in, it’s the difference between a system that lurches and a system that glides.
Standout feature: Fine adjustment for repeatable pneumatic speed control
Make small airflow changes that produce consistent, predictable motion—ideal for tuning actuators and air circuits so they run smoothly and reliably.
-
R178,00
AirCraft Metal Flow Control 4mm x 1/4" Male Thread (SG MSC04-02)
At a Glance: Precision metal flow control valve with 4mm push-in tube port and 1/4" male thread—dial in smooth pneumatic speed control.
When your pneumatic setup needs controlled, predictable airflow (not a surprise gust), the AirCraft SG MSC04-02 Metal Flow Control is the tool for the job.
Designed for 4mm PU tubing and a 1/4" male threaded connection, it allows you to fine-tune airflow to cylinders, actuators, and air circuits for smoother movement and better system stability.
It’s compact, durable, and satisfying to adjust—because precision should feel precise.
Standout feature: Accurate adjustment for dependable pneumatic tuning
Make small airflow changes that actually matter—ideal for setting consistent cylinder speeds, reducing jolts, and improving repeatable performance in compressed air systems.
-
R178,00
AirCraft Metal Flow Control 4mm x 1/8" Male Thread (SG MSC04-01)
At a Glance: Precision metal flow control valve with 4mm push-in tube port and 1/8" male thread—fine-tune air speed and stability.
When your pneumatic setup needs a little finesse (instead of full send), the AirCraft SG MSC04-01 Metal Flow Control gives you smooth, adjustable control over airflow.
Built for 4mm PU air tubing and a 1/8" male threaded connection, it’s ideal for managing actuator speed, reducing air blast, and keeping your air tools and circuits behaving like well-trained robots.
Compact, dependable, and satisfying to adjust—because “just enough air†is a real engineering love language.
Standout feature: Fine adjustment for stable pneumatic speed control
Make tiny airflow changes that actually stick—perfect for dialing in consistent cylinder movement, reducing jolts, and improving control where smooth motion matters.
-
R177,00
AirCraft PU Hose Fitting Valve 6mm x 1/4" Male Thread (SG HVSF02-06)
At a Glance: Inline adjustable flow control valve with 6mm push-in tube fitting and 1/4" male thread connection.
The AirCraft SG HVSF02-06 PU hose fitting valve is a compact, dependable way to control airflow in your pneumatic setup.
With a 6mm push-in tube connection and a 1/4" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and general pneumatic circuits where smooth response and repeatable control are essential.
Adjust the knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for smoother pneumatic performance
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially useful for controlling actuator speed, softening tool response, or stabilising air delivery along a line.
The flow direction marking helps you install it correctly for consistent, reliable control.
-
R173,00
AirCraft Metal Swivel Elbow 10mm x 1/2′ Male (SG MPH10-04)
At a Glance; 10mm push-in tube connection to 1/2" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH10-04 Metal Swivel Elbow is the practical choice when a 10mm pneumatic line needs to turn neatly into a larger threaded port—without stressing the tube or compromising the seal. It connects 10mm tubing to a 1/2" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening. That means cleaner routing, less strain on the line and a more dependable, leak-resistant connection for workshop and industrial compressed-air systems.
Strong, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector for 10mm tubing and larger pneumatic ports—keeps routing tidy and alignment easy for professional results.
-
R172,00
AirCraft PU Hose Fitting Valve 1/8" Male x 1/8" Male Thread (SG HVSS01-01)
At a Glance: Inline adjustable flow control valve with 1/8" male thread x 1/8" male thread connections.
The AirCraft SG HVSS01-01 PU hose fitting valve is a simple, effective way to fine-tune airflow in your pneumatic system.
With 1/8" male threads on both ends, it fits neatly between compatible fittings, regulators, manifolds, and air tools to help you control air delivery with a quick twist of the adjustment knob.
Ideal for reducing sudden surges, taming aggressive tool response, or smoothing actuator movement where consistent airflow makes all the difference.
Inline airflow control with clean, threaded fitment
This valve works as an inline flow controller, letting you restrict or adjust airflow to suit your application.
It’s a handy addition for air lines where you need a threaded connection on both sides, and the flow direction marking helps you install it correctly for predictable control.
-
R171,00
AirCraft PU Hose Fitting Valve 8mm x 8mm
At a Glance: Inline on/off valve with 8mm push-in connections (8mm to 8mm)
Get instant, local control over your compressed-air line with the AirCraft SHVFF08-08 PU Hose Fitting Valve 8mm x 8mm. This compact inline valve is designed to slot
neatly into 8mm pneumatic hose runs using push-in connections on both ends, making it easy to start/stop airflow exactly where you need it. Ideal for isolating a tool,
workstation or machine feed, it helps streamline maintenance and troubleshooting without shutting down the entire air system.
Standout feauture or series/quality/range Quick on/off control built right into the hose line
Install it at the point of use for simple isolation and safer servicing—perfect for tidy pneumatic layouts and busy workshops.
-
R168,00
AirCraft Metal PU Fitting T-Joint 10mm x 3/8′ Male (SG MPT10-03)
At a Glance; 10mm push-in T fitting with a 3/8" male threaded branch for clean air line splitting.
The AirCraft SG MPT10-03 Metal PU Fitting T-Joint is a compact, workshop-ready way to add a branch connection to a 10mm pneumatic line—especially when you need a larger 3/8" threaded port. It connects two 10mm pneumatic/PU tubes in-line and provides a 3/8" male threaded outlet for a secondary connection, ideal for manifolds, valves, regulators, gauges or auxiliary air lines. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy, serviceable and reliably sealed.
Branch your 10mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a larger threaded port for accessories or branch connections.
-
R165,00
AirCraft Metal PU Fitting T-Joint 10mm (SG MPUT10)
At a Glance: 10mm push-in metal tee fitting for quick 3-way air line splits
The AirCraft SG MPUT10 Metal PU Fitting T-Joint is a strong, compact connector made for 10mm pneumatic tubing when you need a neat branch line without drama. It splits a single compressed air supply into two outlets, helping you build cleaner hose routing on compressors, spray setups and pneumatic control systems. Push the tube in fully, seat it properly, and you’ll have a secure connection that keeps airflow routing organised and dependable.
Quick Push-In Tee Connector – SG MPUT10
This metal-bodied 3-way T-joint suits PU/nylon pneumatic tubing and is ideal for workshop and light industrial applications where space is limited but reliability matters. The push-in design speeds up installs and simplifies future line changes.
