Showing 1–16 of 17 resultsSorted by latest
-
R412,75
Material:
Cotton
Width: 30mm
Diameter: Ø200mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R362,50
Tork Craft Pig Tail for Bench Grinders 16 mm Right Hand
Heading: 16 mm arbor fit, right-hand threaded pig tail accessory
The Tork Craft TCPT016-02 pig tail is designed for bench grinders with a 16 mm spindle and right-hand thread orientation. It provides a reliable mounting solution for grinding wheels, cutting discs and polishing wheels, keeping tools safe, stable and ready for heavy-duty workshop or industrial use.
Constructed for frequent use, this pig tail supports fast wheel changes, solid fitment and enhanced stability under high RPM – making it a dependable accessory for serious grinding and cutting operations.
-
R362,50
Tork Craft Pig Tail for Bench Grinders 16mm Left Hand
Heading: 16 mm arbor fit, left-hand threaded pig tail for bench grinders
The Tork Craft TCPT016-01 pig tail is a left-hand threaded accessory designed for bench grinders with a 16 mm spindle. It allows secure mounting of grinding wheels, cutting discs, polishing wheels and other bench-grinder attachments, ensuring stable and safe operation in high-duty workshop or industrial environments.
With a robust design and purpose-built fitment this pig tail supports frequent wheel changes and delivers reliable performance when used as part of a professional tool-kit or on job-site equipment.
-
R340,30
Material:
Cotton
Width: 30mm
Diameter: Ø150mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R320,85
Tork Craft Pig Tail for Bench Grinders 12mm Right Hand
Heading: 12 mm arbor fit, right-hand threaded pig tail for bench grinders
The Tork Craft TCPT012-02 pig tail is a precision-made right-hand threaded accessory designed for bench grinders with 12 mm spindles and right-hand mounting style. It enables secure mounting of grinding wheels, cutting wheels or polishing attachments, ensuring stable operation under high RPM and vibration-prone tasks.
Engineered for heavy-duty workshop and industrial environments, this pig tail supports fast and safe wheel changes, delivering better performance and extended tool life when used with compatible grinding machines.
-
R320,85
Tork Craft Pig Tail for Bench Grinders 12mm Left Hand
Heading: 12mm left-hand mounting accessory for bench grinders
The Tork Craft TCPT012-01 pig tail is a left-hand threaded arbor accessory designed for bench grinders that use a 12mm spindle. Built for secure mounting of grinding wheels, cutting wheels, polishing wheels and other bench-grinder attachments, it provides a reliable fit that keeps your wheels running true at high RPM.
Its left-hand orientation prevents the wheel from loosening during operation, offering safer and more stable performance — essential in both workshop and industrial grinding environments.
-
R275,70
Buffing wheels in the kit:
- (x1) Ø100mm Sisal stitched buff
- (x1) ø100mm denim stitched buff
- (x1) ø100mm cotton stitched buff
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R274,10
Material:
Cotton
Width: 20mm
Diameter: Ø200mm
Sections: 2
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R242,50
Material:
Cotton
Diameter: Ø200mm
Ply: 50
Bore: Ø1/2′
Usage: Use with finishing compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R236,60
Material: Denim
Width: 30mm
Diameter: Ø150mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R218,90
Buffing pad density: Firm
Diameter: Ø150mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R66,00
Buffing
pad material:
Cotton
Diameter: Ø75mm
Bore: Ø6.0mm
Application:
The buffing pad is
not supplied with a chuck adaptor spindle.
TC335 is an arbor with a ø6.0mm shaft available for the buffing pad.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the buffing pad and it cleans surfaces without damaging
it.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R183,00
Buffing pad density: Medium
Diameter: Ø150mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R165,00
Material: Denim
Width: 30mm
Diameter: Ø150mm
Sections: 2
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R153,00
Material:
Cotton
Width: 20mm
Diameter: Ø100mm
Sections: 2
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R120,00
Buffing pad density:
Medium
Diameter: Ø100mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
Alfa Con-rod bearing set - HD 6 cyl 
Tork Craft Plier Mini End Cutting 120Mm Nippers Micro