Showing 17–32 of 64 resultsSorted by latest
-
R300,50
Pattern: Standard
Density: Firm
Colour: Orange
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR |
POLISH |
COMPOUND |
| White |
Good |
Best |
| Orange |
Good |
Best |
| Red |
Best |
|
| Black |
Best |
|
Compounding sponge range:
| ORDER NO. |
DENSITY |
COLOUR |
DIAMETER |
THREAD |
PATTERN |
|
SPC00101 |
Firm |
Orange |
ø200mm |
Hook & Loop |
Standard |
|
SPC00100 |
Soft |
Yellow |
ø200mm |
Hook & Loop |
Standard |
|
SPC00102 |
Soft |
Red |
ø200mm |
Hook & Loop |
Standard |
|
TCCS15058 |
Firm |
White |
ø150mm |
5/8 UNC |
Standard |
|
TCCS15014-1 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014-4 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014 |
Firm |
Orange |
ø150mm |
M14 |
Standard |
|
TCC15014-2 |
Soft |
Red |
ø150mm |
M14 |
Standard |
|
TCCS15014-3 |
Soft |
Black |
ø150mm |
M14 |
Standard |
|
TCCS15014-5 |
Soft |
Black |
ø150mm |
M14 |
Waffle |
|
SPC00124 |
Firm |
Blue |
ø125mm |
Hook & Loop |
Standard |
NOTE:
For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher’s thread:
-
R286,10
Diameter: Ø250mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
-
R281,05
Diameter: 8" (200mm)
Colour: Black
<!-- 
-->
This high-quality black finishing pad is made from a durable foam material, designed for the final stages of car
polishing. With a diameter of 200mm (8 inches), it’s ideal for larger surfaces and works perfectly with DA (Dual
Action) or rotary polishers. The pad’s soft, open-cell structure ensures a swirl-free, mirror-like finish,
effectively applying waxes, sealants, and glazes. Its dense composition provides excellent control and even pressure
distribution, making it an essential tool for achieving a professional, showroom-quality shine.
Application:
- Applying Waxes and Sealants
- Final Polishing and Glazing
- Enhancing Clear Coats
- Working on Delicate Surfaces
- Spreading and Leveling
-
R281,05
Pattern: Standard
Density: Soft
Colour: Red
Diameter: Ø200mm
Thread/Hook & Loop: Hook & Loop
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR |
POLISH |
COMPOUND |
| White |
Good |
Best |
| Orange |
Good |
Best |
| Red |
Best |
|
| Black |
Best |
|
Compounding sponge range:
| ORDER NO. |
DENSITY |
COLOUR |
DIAMETER |
THREAD |
PATTERN |
|
SPC00101 |
Firm |
Orange |
ø200mm |
Hook & Loop |
Standard |
|
SPC00100 |
Soft |
Yellow |
ø200mm |
Hook & Loop |
Standard |
|
SPC00102 |
Soft |
Red |
ø200mm |
Hook & Loop |
Standard |
|
TCCS15058 |
Firm |
White |
ø150mm |
5/8 UNC |
Standard |
|
TCCS15014-1 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014-4 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014 |
Firm |
Orange |
ø150mm |
M14 |
Standard |
|
TCC15014-2 |
Soft |
Red |
ø150mm |
M14 |
Standard |
|
TCCS15014-3 |
Soft |
Black |
ø150mm |
M14 |
Standard |
|
TCCS15014-5 |
Soft |
Black |
ø150mm |
M14 |
Waffle |
|
SPC00124 |
Firm |
Blue |
ø125mm |
Hook & Loop |
Standard |
NOTE:
For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher’s thread:
-
R275,70
Buffing wheels in the kit:
- (x1) Ø100mm Sisal stitched buff
- (x1) ø100mm denim stitched buff
- (x1) ø100mm cotton stitched buff
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R274,10
Material:
Cotton
Width: 20mm
Diameter: Ø200mm
Sections: 2
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R272,35
Designed
to remove paint, rust and other materials, while hardly affecting the underlying
surface.
SIZE: Ø50mm
Application:
These face off discs are designed to remove rust, paint and other materials
from metal surfaces.
-
R269,85
Diameter: Ø230mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
-
R242,95
Diameter: Ø230mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad’s diameter.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
-
R242,50
Material:
Cotton
Diameter: Ø200mm
Ply: 50
Bore: Ø1/2′
Usage: Use with finishing compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R236,60
Material: Denim
Width: 30mm
Diameter: Ø150mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Application:
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
The selection of compounds:
| ORDER NO. |
COLOUR |
DESCRIPTION |
WEIGHT |
RCC 20 – AB |
RED |
General purpose medium cutting for
brass, copper and silver. |
+/- 1.2kg |
RCC 11 – SD |
GREY |
Finishing compound for steel,
stainless steel, chrome and aluminium. |
+/- 1.3kg |
RCC 12 – S |
BROWN |
Cutting and buffing compound for
steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
RCC 1 SDDB |
WHITE |
Bright finishing compound for
stainless steel. |
+/- 1.5kg |
RCC G-13 |
LIGHT GREEN |
Cutting compound for stainless
steel, aluminium and aluminium alloys. |
900g |
RCC G-14 |
DARK GREEN |
Finishing compound for all kinds
of metals. |
900g |
RCC SW-1 |
PURPLE |
Cutting compound for stainless
steel. |
900g |
RCC SW-3 |
WHITE |
Cutting compound for stainless
steel. |
900g |
RCC SW-2000 |
YELLOW |
Cutting compound for copper,
brass, aluminium, brass and steel |
900g |
The selection of stitched buffs:
The selection of unstitched buffs:
| ORDER NO. |
MATERIAL |
WIDTH |
DIAMETER |
PLY |
BORE |
|
TCBF150-50W |
COTTON |
|
ø150mm |
50 |
ø1/2′ |
|
TCBF200-50W |
COTTON |
|
ø200mm |
50 |
ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
-
R228,95
Grit: #3000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #2000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #1000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #500
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,95
Grit: #300
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite,
choose from 50-3000 Grit. Optimized for polishing marble, granite and stone.
Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118
100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to
the polisher, and attach the polishing pad to the backing pad. Set the speed
at 3000 – 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique.
Make sure all prior scratches are removed before moving onto a higher grit.
Reapeat the same process using all 7 pads to complete the polishing process.
Polish from grit 50 – 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other
natural stones, use Buff Pad as the last step. Wet the workpiece and run the
Buff pad semi-wet with very low water. When the water is consumed, the
process is complete. Repeat as necessary to improve the look and achieve the
mirror effect result.
Steps by pad:
| Pad |
Grit |
| 1. Grey |
50 |
| 2. Yellow |
150 |
| 3. Orange |
300 |
| 4. Red |
500 |
| 5. Dark Green |
1000 |
| 6. Green |
2000 |
| 7. Pink |
3000 |
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Jeep Sensor - Air Mass With Body (4 Pin)