Showing 65–80 of 223 resultsSorted by latest
-
R53,00
AirCraft Hose Tail Connector Brass – 1/4" Female x 10mm (SBF1259)
At a Glance: 1/4" Female Thread to 10mm Hose Tail in Solid Brass
When your air line setup calls for a slightly larger hose, the AirCraft SBF1259 gives you a clean, dependable connection between a 1/4" female threaded port
and a 10mm hose. The hose tail (barb) design helps the hose grip firmly from the inside, while the threaded end makes it easy to integrate into common pneumatic
and compressed air systems. Ideal for workshops, compressor lines, and custom hose builds where reliability matters.
Solid-brass AirCraft connector for secure 10mm hose-to-threaded joins
A practical fitting for everyday use: push the hose fully onto the 10mm tail, clamp it correctly, then thread the 1/4" female side onto a compatible adaptor,
coupler, regulator or manifold. Brass offers good corrosion resistance and keeps connections service-friendly over time.
-
R52,00
AirCraft Connector German 10mm Hosetail 2pc Pack – SG11031P
At a Glance: German-style quick coupling plugs with 10 mm barbed hose tail (2pc pack)
The AirCraft SG11031P Connector (German profile) is the neat way to add German-style quick-connect convenience directly onto 10 mm hose lines—now in a practical two-piece pack. Each connector features a 10 mm hose-tail (barbed) end that grips inside the hose for a secure hold, making it ideal for workshop air lines, higher-flow tool drops, and pneumatic setups where you want fast connect/disconnect without extra adaptors. Pair with a compatible German quick coupler and you can connect and disconnect in seconds, helping keep air stations organised and work moving.
Standout feature: Direct-to-hose 10 mm hose-tail quick-connect plugs in a handy 2pc pack
Fit two hoses/tools or keep a spare ready—either way, you get quick-coupler speed with a compact, tidy hose connection.
-
R52,00
AirCraft Connector German 8mm Hosetail 2pc Pack – SG11030P
At a Glance: German-style quick coupling plugs with 8 mm barbed hose tail (2pc pack)
The AirCraft SG11030P Connector (German profile) gives you an easy way to add German-style quick-connect convenience directly onto 8 mm hose lines—now in a practical two-piece pack. Each connector features an 8 mm hose-tail (barbed) end that grips inside the hose for a secure hold, making it ideal for workshop air lines, tool drops, and pneumatic setups where you want fast connect/disconnect without extra adaptors. Pair it with a compatible German quick coupler and you can connect and disconnect in seconds, keeping your air stations organised and your workflow moving.
Standout feature: Direct-to-hose 8 mm hose-tail quick-connect plugs in a handy 2pc pack
Fit two hoses/tools or keep a spare ready—either way, you get quick coupler speed with a compact, tidy hose connection.
-
R52,00
AirCraft Connector German 6mm Hosetail 2pc Pack – SG11020P
At a Glance: German-style quick coupling plugs with 6 mm barbed hose tail (2pc pack)
The AirCraft SG11020P Connector (German profile) gives you a simple way to add German-style quick-connect convenience directly onto 6 mm hose lines—now in a practical two-piece pack. Each connector features a 6 mm hose-tail (barbed) end that grips inside the hose for a secure hold, making it ideal for lightweight pneumatic lines, blow guns, and compact workshop setups. Pair it with a compatible German quick coupler and you’ll be able to connect and disconnect in seconds, keeping your workflow smooth and your air stations tidy.
Standout feature: Direct-to-hose 6 mm hose-tail quick-connect plugs in a handy 2pc pack
Fit two hoses/tools or keep a spare ready—either way, you get quick coupler speed without extra adaptors.
-
R52,00
AirCraft Connector ARO Type 10mm Hosetail Packaged (SG10070P)
At a Glance: ARO-type quick-connect connector with 10mm hose tail for rapid air line connections
For higher-flow air lines and sturdy workshop hose setups, the right hose-end connector makes all the difference. The AirCraft SG10070P Connector (ARO Type) features a 10mm hose tail designed to fit into compatible 10mm ID compressed air hose, creating a secure barb-style hose connection. It’s designed to work with ARO-style quick couplers, allowing quick connect/disconnect for hoses and tool lines, helping you standardise your workshop fittings and cut down on downtime. Supplied in bulk, it’s ideal for outfitting multiple hoses or keeping spares ready for fast repairs.
Standout feauture or series/quality/range: ARO quick connect with a 10mm hosetail for solid hose assemblies
A practical combination of quick-connect convenience and a larger hosetail for robust air hose builds—great for workshops that run bigger lines and want consistent connections.
-
R52,00
AirCraft Connector ARO Type 8mm Hosetail Packaged (SG10060P)
At a Glance: ARO-type quick-connect connector with 8mm hose tail for rapid air line connections
When you want a tidy compressed air setup that’s quick to connect and easy to maintain, standardising your hose ends is the move. The AirCraft SG10060P Connector (ARO Type) features an 8mm hose tail designed to fit into compatible 8mm ID air hose, giving you a secure barb-style hose connection. It’s designed to work with ARO-style quick couplers, letting you connect and disconnect hoses quickly, reduce downtime, and keep your workshop air lines consistent. Supplied in bulk, it’s ideal for fitting multiple hoses or stocking spares for fast repairs.
Standout feauture or series/quality/range: ARO quick connect with an 8mm hosetail for workshop-ready air lines
A practical combination of quick-connect convenience and a reliable hose-tail connection—perfect for building hose assemblies and keeping your air system uniform.
-
R52,00
AirCraft Connector ARO Type 6mm Hosetail Packaged (SG10050P) 2-Pack
At a Glance: ARO-type quick-connect connector with 6mm hose tail for rapid air line connections
When you’re building air lines or repairing a hose in the workshop, having the right quick-connect on hand saves serious time. The AirCraft SG10050P Connector (ARO Type) features a 6mm hose tail designed to fit into compatible 6mm ID compressed air hose, giving you a secure barb-style connection. On the other end, it matches ARO-style quick couplers—so you can connect and disconnect hoses quickly, keep your setup standardised, and reduce downtime when switching tools or moving between workstations. Supplied in bulk, it’s perfect for kitting out multiple hose assemblies or keeping spares ready.
Standout feauture or series/quality/range: ARO quick connect meets practical hose-tail simplicity
A quick-connect profile for fast coupling, paired with a 6mm hosetail for straightforward hose assembly—ideal for workshop air lines and compact pneumatic setups.
-
R52,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 12mm (1pc Pack) (SBM1260P)
At a Glance: 1/4" Male Thread to 12mm Hose Tail – Convenient 1pc Pack
When you only need one fitting to complete an install or sort a quick repair, the AirCraft SBM1260P is the tidy, toolbox-friendly option.
This solid brass hose tail connector joins a 12mm hose to a 1/4" male threaded connection—ideal for workshop compressed air lines, compressor plumbing,
and pneumatic routing where a secure hose grip matters. Push the hose fully onto the barb, clamp it correctly, then thread the male end into a compatible
female port for a clean, serviceable connection.
Single-pack AirCraft brass connector for neat 12mm hose-to-threaded joins
The 1pc pack format makes it perfect for maintenance kits and small jobs. Brass offers good corrosion resistance in typical workshop environments and keeps
connections easy to assemble, inspect and service over time.
-
R51,00
AirCraft Swivel Connector 1/4" Male BSP (ARO Type)
At a Glance: 1/4" M BSP swivel connector with ARO-type quick-connect end to reduce hose twist
Give your air tools a bit more freedom with the AirCraft SG6000 Swivel Connector 1/4" Male BSP (ARO Type). This clever little adaptor adds a swivelling connection
point between your air line and tool setup, helping to reduce hose twist as you move around the job. The result is a more comfortable working angle, less strain on fittings,
and a cleaner, more controllable hose run—especially handy with spray guns, air tools, and tight workspaces where the hose loves to fight back.
Standout feauture or series/quality/range Swivel action that keeps the hose from wrestling you
The swivelling joint helps the hose follow your movement instead of twisting up, which can improve handling and help extend the life of your hose and connectors.
-
R51,00
Tork Craft Heavy Duty Hose Clamp — 56-59 mm Bulk (Model HCHD56-59)
This heavy duty worm-drive hose clamp is engineered for hoses, ducting or tubing with outer diameters between 56 mm and 59 mm. Supplied in bulk packs, it offers dependable clamping performance in plumbing, HVAC, industrial and mechanical applications.
-
R50,00
Tork Craft Heavy Duty Hose Clamp — 64-67 mm Bulk (Model HCHD64-67)
This heavy duty worm-drive hose clamp is intended for hoses or flexible tubing with outer diameters between 64 mm and 67 mm. Supplied in bulk packs, it is ideal for use in plumbing, HVAC, industrial and mechanical hose securing tasks.
-
R50,00
AirCraft Brass Hose Tail Connector – 1/4" Female x 8mm (SBF1258)
At a Glance: 1/4" Female Thread x 8mm Hose Tail in Solid Brass
When you need a tidy, dependable connection between a threaded port and an 8mm hose, this AirCraft brass hose tail connector gets it done with zero fuss.
The hose tail (barb) grips the inside of the hose for a snug mechanical hold, while the 1/4" female thread makes it easy to integrate into common air line
and pneumatic setups. Perfect for quick repairs, new airline builds, and keeping your compressor lines neat and serviceable.
Solid-brass AirCraft connector for secure 8mm hose-to-threaded connections
Built for workshop practicality: a classic hose tail design that pairs best with a proper clamp, and a female threaded side that helps you connect to couplers,
regulators, manifolds or adapters. Brass resists corrosion well in typical shop environments and keeps fittings service-friendly over time.
-
R49,00
AirCraft Reducer 1/2" x 3/8" M/F Conical (SB1233)
At a Glance: 1/2" to 3/8" male/female conical reducer for neat pneumatic connections
Air systems are wonderfully simple… until two fittings disagree about what size they want to be. The AirCraft SB1233 conical reducer is your clean,
no-drama solution for stepping from a 1/2" connection down to 3/8" using a male/female (M/F) configuration. It’s ideal for compressors,
regulators, filters, spray equipment and general pneumatic plumbing where a compact adaptor keeps your setup tidy and serviceable. The conical sealing
style is designed to mate properly for a secure connection when installed correctly.
AirCraft Pneumatic Fittings – Practical Solutions For Real Workshops
AirCraft fittings are made to help you build a reliable compressed-air setup with sensible, compatible connections.
This reducer is a quick way to bridge sizes without replacing your existing hoses or components.
-
R48,00
AirCraft Reducing Manifold 1/8" x 3/8" F/F (SB1247P) 1 Piece Pack
At a Glance: 1/8" to 3/8" female-to-female reducing manifold for stepping between air-line sizes
Air systems don’t always follow a single neat standard—sometimes you’ve got a small port on one component and a larger fitting on the next.
The AirCraft SB1247 reducing manifold is the tidy solution, giving you a female-to-female (F/F) connection that steps from 1/8" to 3/8".
It’s ideal for adapting mismatched pneumatic components on compressors, regulators, filters, manifolds and general compressed-air plumbing without
building an awkward stack of adaptors. Designed for practical workshop use, this connector helps keep your air-line layout compact, serviceable and
leak-conscious when installed correctly.
AirCraft Pneumatic Fittings – Simple Adaptors That Keep Systems Running
AirCraft fittings are made to help you create dependable compressed-air connections with cleaner layouts and fewer leak points.
This reducing manifold bridges two common sizes in one compact fitting.
-
R48,00
AirCraft Nipple Brass 3/8×3/8 M/m (SB1207)
At a Glance: Brass male-to-male nipple adaptor with 3/8 x 3/8 thread size for pneumatic connections.
The AirCraft SB1207 brass nipple is a dependable male-to-male adaptor designed for joining two female-threaded pneumatic components with matching 3/8 x 3/8 threads.
It’s ideal for building or repairing compressed-air lines, connecting couplers, regulators, valves, filters, manifolds and other air system hardware where a sturdy threaded connection is essential.
Brass fittings are a popular choice in workshop air systems because they’re durable and corrosion resistant—helping keep your air plumbing leak-resistant and service-friendly over the long term.
Strong, corrosion-resistant adaptor for clean compressed-air assemblies
A good fitting is the difference between “job done†and “why is my compressor cycling every two minutes?†The SB1207 helps you connect components properly and keep air lines neat, solid and easier to maintain.
-
R47,00
AirCraft Nipple Brass 1/8×1/4 Male/male (SB1209P (Packaged for display))
At a Glance: Brass male-to-male nipple adaptor with 1/8 x 1/4 thread sizes for pneumatic connections.
The AirCraft SB1209P (Packaged for display) brass nipple is a handy male-to-male adaptor designed to connect two female-threaded pneumatic components where you need to step between 1/8 and 1/4 thread sizes.
It’s ideal for tidy compressed-air plumbing on regulators, gauges, valves, manifolds, couplers and air tool connections—especially when you want a clean, direct join without stacking multiple adaptors.
Brass construction makes it a solid workshop choice thanks to its durability and corrosion resistance, helping you keep your air system reliable and service-friendly.
A simple adaptor that makes pneumatic setups cleaner and easier to service
Pneumatic systems are basically a LEGO set for adults—except air leaks are the pieces that mysteriously vanish. The SB1209P (Packaged for display) helps you adapt between common fitting sizes properly, keeping your layout neat and your connections more dependable.
Jeep Sensor-Wheel Speed - Front (2 Pin) 
Fiat sensor-wheel speed -rear (2 PIN 790mm) 
Renault sensor-wheel speed -rear right 645mm 
Citroen cv boot kit - outer 
Jeep/ Mercedes Sensor - Inlet Air Temperature (2 Pin) 
Alfa Engine mounting - left 
Alfa/Fiat/Jeep Oil pressure sender unit (1 PIN M14) 
Fiat cv boot kit - outer