Showing 385–400 of 453 resultsSorted by latest
-
R34,00
AirCraft PU Fitting Straight Stud With O-Ring 10mm x 1/8" BSP Male (SG SPC10-G01)
At a Glance: 10mm push-in tube to 1/8" BSP Male (M) thread with O-ring seal
Build a cleaner, faster air line setup with the AirCraft SG SPC10-G01 straight stud fitting. Designed to join 10mm pneumatic tubing to a 1/8" BSP male threaded port, it uses a push-in collet for speedy tube connections and an O-ring to help create a dependable seal at the port interface. It’s a practical choice for workshop air systems, compressor plumbing, regulators and manifolds—anywhere you want a compact straight-through connection you can trust.
Standout feauture or series/quality/range: O-ring sealed straight stud convenience
The integrated O-ring supports a tighter port seal, helping reduce annoying air leaks while keeping installation simple and tidy—push in the tube, tighten the thread, and you’re ready to go.
-
R33,00
AirCraft PU Hose Fitting Y Joint 4mm x 1/4" M BSP (SPX04-02)
At a Glance: Y-branch fitting with two 4mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX04-02 PU Hose Fitting Y Joint 4mm x 1/4" M BSP is a compact, workshop-ready way to branch a single air feed into two 4mm PU hose lines while screwing securely into a 1/4" BSP threaded port. It’s ideal for pneumatic systems where you need to split airflow to two lines—such as feeding two small cylinders, air-assist lines, gauges, or control circuits—without turning your installation into a maze of adaptors. With push-in speed on the 4mm ports and a dependable threaded connection, it keeps your air routing neat, serviceable, and built for quick maintenance.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Create a clean branch line in seconds—push your 4mm hoses in to lock, then use the 1/4" BSP thread for a solid connection to valves, manifolds, regulators, or equipment ports.
-
R33,00
AirCraft PU Hose Fitting Y Joint 6mm x 1/4" M BSP (SPX06-02)
At a Glance: Y-branch fitting with two 6mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX06-02 PU Hose Fitting Y Joint 6mm x 1/4" M BSP is a compact, reliable way to branch a single air supply into two 6mm PU hose lines while screwing securely into a 1/4" BSP threaded port. It’s ideal for pneumatic systems where you need to split airflow to two points—feeding two actuators, control lines, air-assist lines, or gauges—without building a tower of adaptors. With push-in speed on the 6mm ports and a dependable threaded connection, it keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Push your 6mm hoses in to lock, then use the 1/4" BSP thread for a solid connection to valves, manifolds, regulators, or equipment ports—clean branching without the clutter.
-
R33,00
AirCraft PU Hose Fitting Tee 6mm x 1/4" Male BSP
At a Glance: Push-in tee for 6mm pneumatic hose with 1/4" M BSP threaded connection
Split a 6mm air line cleanly while connecting into standard BSP equipment with the AirCraft SPB06-02 PU Hose Fitting Tee 6mm x 1/4" Male BSP. This compact tee uses
push-in ports across the tee for 6mm PU pneumatic hose, and a 1/4" BSP male threaded port for connecting directly into valves, manifolds, regulators, FRL units,
gauges or other BSP female ports. It’s ideal for tidy pneumatic layouts in automation, machinery and workshop air systems where reliability and easy maintenance matter.
Standout feauture or series/quality/range Push-in convenience with a 1/4" BSP threaded take-off
Perfect when your hose run is 6mm but the component port is 1/4" BSP—this tee keeps the installation compact and reduces extra adaptors.
-
R33,00
AirCraft PU Fitting Straight Stud With O-ring 10mm – 3/8" M BSP (SPC10-G03)
At a Glance: Push-in 10mm tube x 3/8" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC10-G03 straight stud fitting is a clean, time-saving way to connect 10mm PU tubing to a larger 3/8" BSP threaded port—now with the extra confidence of an O-ring seal.
Push the tube into the quick-connect collar for a strong grip, then screw the male thread into your manifold, regulator block, compressor accessory port or pneumatic equipment.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter 3/8" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—ideal for maintaining consistent airflow on larger ports.
-
R33,00
AirCraft Insert Y Joint PU 4mm
At a Glance: Push-in Y connector for splitting or combining 4mm PU pneumatic tubing
The AirCraft SG APYJ04 Insert Y Joint PU 4mm is the neat way to branch a pneumatic line without turning your setup into a spaghetti experiment. Designed for 4mm polyurethane (PU) tubing, this push-in Y connector allows you to split one air line into two outlets (or combine two lines into one, depending on your layout). It’s ideal for compact control circuits, small air tools, spray setups and workshop air routing where clean, reliable connections matter.
Quick-connect Y branching for tidy pneumatic line management
With push-in connections, installation is fast: push the tubing in to lock it, and release via the collar when you need to change or service the line. The Y format helps keep bends smooth and routing efficient, especially in tighter spaces.
-
R33,00
AirCraft PU Hose Fitting Tee 6mm x 6mm x 1/4" BSP (SG APD06-02)
At a Glance; 6 mm tube tee with 1/4" BSP male thread for neat air line branching
The AirCraft SG APD06-02 PU Hose Fitting Tee 6mm x 6mm x 1/4" BSP is a reliable connector for building clean pneumatic layouts where you need to branch a 6 mm tube line and connect into equipment with a threaded port. With two 6 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your compressed-air setup compact, tidy and easy to service.
Hybrid tee: push-in tubing plus 1/4" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air line.
-
R33,00
AirCraft Insert T-Joint Side PU 4mm (SG APDJ04)
At a Glance; Side-branch push-in tee for 4 mm pneumatic tubing
The AirCraft SG APDJ04 Insert T-Joint Side PU 4mm is made for neat, space-saving branching in small pneumatic systems. This side tee fitting lets you run a 4 mm tube line through while taking a clean side outlet for an extra tool, valve, gauge, or accessory. It’s a go-to connector for compact air layouts—airbrush stations, control panels, benches, and machinery—where fast push-in installation keeps everything tidy and easy to maintain.
Compact branching without the clutter
The side-branch tee design helps keep your tubing runs straight and organised while adding a take-off point exactly where you need it. Push-in collets grip the tube securely and release quickly for servicing or rerouting.
-
R33,00
AirCraft Insert T-Joint PU 4mm (SG APBJ04)
At a Glance; 4 mm push-in tee connector for fast air line branching
The AirCraft SG APBJ04 Insert T-Joint PU 4mm is a tidy, time-saving way to split one pneumatic line into two. Designed for 4 mm tubing (commonly PU/nylon air line), this push-in tee fitting makes clean installs easy—push the tube in, route your branch, and you’re back in action with a secure connection that’s ideal for airbrush stations, small regulators, manifolds, and compact workshop air setups.
Quick-connect convenience in a compact tee
Built for everyday workshop use, this insert-style T-joint helps you create neat branches without complicated clamps or fiddly hose tails. The push-in collet design allows quick assembly and simple tube release when you need to adjust or service your line.
-
R33,00
AirCraft PU Fitting Straight Stud With O-ring 10mm – 1/4" M BSP (SPC10-G02)
At a Glance: Push-in 10mm tube x 1/4" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC10-G02 straight stud fitting is a clean, time-saving way to connect 10mm PU tubing to a standard 1/4" BSP threaded port—now with the extra confidence of an O-ring seal.
Push the tube into the quick-connect collar for a strong grip, then screw the male thread into your regulator, manifold, filter unit, compressor outlet or pneumatic accessory.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter, cleaner 1/4" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—great for improving leak resistance and maintaining stable airflow.
-
R32,00
AirCraft Elbow 8mm-3/8" M BSP PU Hose Fitting
At a Glance: 8mm push-in tube connection to 3/8" Male BSP thread in a space-saving 90° elbow.
When your air line needs to turn a corner without drama, this fitting is the clean solution. The AirCraft Elbow 8mm-3/8" M BSP PU Hose Fitting connects 8mm pneumatic tubing to a 3/8" BSP female port using a fast push-in connection, giving you a neat 90° elbow right at the port. It’s ideal for compressors, FRLs, regulators, manifolds and pneumatic tools where space is limited and you want tidy routing with reduced tube strain and kinking.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings
Built for quick installs, neat pneumatic plumbing and easy maintenance—perfect for busy workshop and industrial compressed-air systems.
-
R32,00
AirCraft PU Hose Fitting 4-Way Connector 8mm (SG APZ08)
At a Glance: Push-in 4-way cross connector for 8 mm pneumatic tubing
Build a cleaner, more organised compressed-air layout with the AirCraft SG APZ08 PU Hose Fitting 4-Way Connector (8mm). This compact push-to-connect cross fitting lets you split, join or re-route airflow across four 8 mm tube runs, perfect for workshop air distribution, pneumatic circuits, spray areas and general air-line management. Push the tubing in for a secure connection, and use the release collar when it’s time to adjust or service your setup.
Compact 8mm 4-Way Push-In Connector For Neat Air-Line Layouts
The SG APZ08 is a space-saving way to bring four pneumatic lines together without extra adaptors or bulky blocks. It helps reduce clutter, keeps tube runs tidy, and makes future changes quick and painless.
-
R32,00
AirCraft PU Hose Fitting 4-Way Connector 6mm (SG APZ06)
At a Glance: Push-in 4-way connector for 6 mm pneumatic tubing
Keep your compressed-air setup neat and efficient with the AirCraft SG APZ06 PU Hose Fitting 4-Way Connector (6mm). This compact push-to-connect fitting makes it easy to split, join or re-route air flow across four 6 mm tube runs, ideal for workshop pneumatic layouts, spray areas, airbrush stations and general air-line distribution. Push the tubing in for a secure hold, and use the release collar for quick, clean line changes when you need to reconfigure.
Compact 4-Way Push-In Connector For Clean Air-Line Management
The SG APZ06 is a space-saving cross connector designed to bring four pneumatic lines together without bulky manifolds. It helps reduce clutter and keeps tube runs organised where multiple connections are needed in a small area.
-
R32,00
AirCraft PU Fitting Straight Stud With O-ring 6mm – 3/8" M BSP (SPC06-G03)
At a Glance: Push-in 6mm tube x 3/8" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC06-G03 straight stud fitting is a clean, time-saving way to connect 6mm PU tubing to a larger 3/8" BSP threaded port—now with the extra confidence of an O-ring seal.
Push the tube into the quick-connect collar for a strong grip, then screw the male thread into your manifold, regulator block, compressor accessory port or pneumatic equipment.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter 3/8" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—ideal for maintaining consistent airflow on larger ports.
-
R32,00
AirCraft PU Hose Fitting Elbow 4mm-1/4" F BSP
At a Glance: 4mm push-in to 1/4" female BSP elbow—ideal for tight 90° pneumatic routing.
Neaten up your air line layout with the AirCraft PU Hose Fitting Elbow 4mm-1/4" F BSP. This compact 90-degree push-in connector is built for 4mm PU tubing and allows you to route lines around corners without kinks, while the 1/4" female BSP thread provides a secure connection to compatible pneumatic ports and adapters. A dependable choice for airbrush stations, small compressors, regulators, valves, manifolds and general compressed-air plumbing where space and tidy routing matter.
Standout feature: Quick push-in connect with a 90° elbow for stress-free hose routing
Install in seconds—push the tube in, route it neatly, and reduce strain on both the tubing and the connected component.
-
R32,00
AirCraft Elbow 6mm-3/8" M BSP PU Hose Fitting
At a Glance: 6mm push-in tube connection to 3/8" Male BSP thread in a space-saving 90° elbow.
Tidy routing, fast installation, fewer leaks. The AirCraft Elbow 6mm-3/8" M BSP PU Hose Fitting is a push-in pneumatic connector that lets you run 6mm tubing neatly around corners while threading straight into a 3/8" BSP female port. It’s ideal for compressed-air layouts where space is tight or where straight fittings would kink the tube. Push the tube in, tighten the threaded end, and you’ve got a clean 90° connection for PU/nylon air lines on compressors, regulators, FRLs, manifolds and pneumatic tools.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings
Designed for quick, reliable tube connections with a compact elbow body that keeps hose runs neat and reduces stress on tubing at the port.
Mazda camshaft - inlet 
Mazda crankshaft pulley-micro-V belt 200x61 7PK 2015- 
Aircraft Elbow W/O-Ring 12Mm-1/8 M Pu Hose Fitting