Showing 1–16 of 30 resultsSorted by latest
-
R1 077,00
AirCraft Service Kit Air Cap and Nozzle 1.3 / 1.4 For LM3000 Spray Gun (SG LM3000-SK01)
At a Glance: Service kit with air cap and nozzle set (1.3 / 1.4) to restore spray pattern and smooth atomisation on LM3000 spray guns.
The AirCraft SG LM3000-SK01 Service Kit is the smart fix when your LM3000 spray gun starts losing its edge.
Worn air caps and nozzles can lead to spitting, uneven fan patterns, poor atomisation and inconsistent coverage.
This kit replaces the key wear components in one go, helping your gun seal correctly, deliver material evenly, and produce a cleaner, more controllable spray pattern for finer finishing work.
Bring back a crisp fan pattern and consistent flow
When nozzle components wear at different rates, performance drops fast.
Swapping the air cap and nozzle as a matched set helps restore proper alignment and airflow, which is where the magic of clean atomisation lives.
Ideal for routine servicing, workshop maintenance, or keeping a spare kit ready to minimise downtime.
-
R697,00
AirCraft Nozzle Kit 1.7mm For L897 Spray Gun (SG L897-01)
At a Glance: Complete 1.7mm nozzle set (air cap, fluid nozzle and needle) to refresh spray pattern and atomisation.
The AirCraft SG L897-01 Nozzle Kit 1.7mm is the go-to replacement set when your L897 spray gun needs its sharpness back.
Over time, wear, dried material and accidental damage can cause spitting, uneven fan patterns, poor atomisation and inconsistent coverage.
This complete kit includes the matching air cap, fluid nozzle and needle, so you can restore proper sealing, consistent flow, and a clean, controllable spray pattern for smooth results.
Bring your L897 spray gun back to a clean, even pattern
Replacing the nozzle components as a matched set helps prevent leaks and improves consistency.
The 1.7mm size is commonly chosen for coatings that need a little more flow than fine-finish work, helping you lay down material evenly without fighting the gun.
Ideal for maintenance, repairs, or keeping a backup kit ready for production work.
-
R607,00
AirCraft Spray Gun HVLP 2.0mm Nozzle 600cc Plastic Cup (SG H827-02)
At a Glance: 2.0mm HVLP nozzle with a 600cc gravity-feed plastic cup for thicker coatings and faster coverage.
The AirCraft SG H827-02 HVLP spray gun is a solid choice when you need to push thicker materials with confidence.
With a larger 2.0mm nozzle and a 600cc gravity-feed plastic cup, it’s well suited to primers, high-build coatings, and jobs where coverage and flow rate matter.
HVLP technology helps lay down material efficiently with less overspray, making it easier to get consistent results on panels, larger surfaces, and general workshop refinishing.
Designed for higher-flow spraying with the AirCraft SG H827-02
The 2.0mm nozzle size supports higher material flow, which can be especially useful for thicker coatings that struggle through smaller setups.
Pair it with correct thinning ratios and stable air supply, and you’ll achieve smoother application with fewer dry patches and less frustration.
-
R525,00
AirCraft Spray Gun HVLP 1.7mm Nozzle 600cc Plastic Cup (SG H827-01)
At a Glance: 1.7mm HVLP nozzle with a 600cc gravity-feed plastic cup for smooth, efficient spraying.
The AirCraft SG H827-01 HVLP spray gun is built for controlled, consistent paint application with less overspray and better transfer efficiency.
Featuring a 1.7mm nozzle and a 600cc gravity-feed plastic cup, it’s a practical choice for primers, basecoats, clear coats and general finishing work where an even fan and predictable flow matter.
Whether you’re doing panel work, touch-ups, or workshop projects, this gun helps you lay down a cleaner coat with less mess and less wasted material.
HVLP control you can feel with the AirCraft SG H827-01
HVLP (High Volume Low Pressure) technology focuses on delivering paint efficiently at lower atomising pressure, helping reduce bounce-back and overspray.
Dial in your fan and fluid settings, match the gun to your compressor, and you’ll get a smoother finish with better material use.
-
R302,00
AirCraft Replacement Spray Gun Body For LM3000 Spray Gun (SG LM3000-SK07)
At a Glance: Replacement LM3000 spray gun body (gun frame/housing) for restoring fitment, alignment and reliable operation.
The AirCraft SG LM3000-SK07 is a replacement spray gun body for the LM3000 spray gun—perfect when the original housing is damaged, cross-threaded, cracked, or worn to the point where parts no longer align correctly.
The gun body is the backbone of the spray gun: it supports the air and fluid passages, mounting points, controls, and the overall fitment of internal components.
Replacing the body can be the most effective way to bring a tired or damaged gun back to proper working order and stable spray performance.
A fresh foundation for a proper rebuild
If threads are stripped, sealing faces are damaged, or the frame has taken a knock, even new service parts can’t always fix leaks or inconsistent behaviour.
A replacement body gives you a clean, true base to rebuild onto—helping you restore correct assembly fitment, reduce leaks, and get predictable control back in your hands.
-
R272,00
AirCraft Spare Nozzle 2.0mm For SG PPPQ2U Paint Pot Gun (SG PPQ2U-1)
At a Glance: Replacement 2.0mm nozzle for SG PPPQ2U paint pot spray guns—restores smooth flow and consistent spray performance.
A spray gun nozzle does a deceptively hard job: shape airflow and coating flow into a controllable pattern. When the nozzle gets worn, damaged, or blocked, the finish quality drops fast—spitting, uneven output, and a spray pattern with a mind of its own.
The AirCraft SG PPQ2U-1 is a 2.0mm spare nozzle designed for the SG PPPQ2U paint pot gun, helping restore clean flow, stable atomisation, and predictable spraying for pressure pot applications.
Ideal for maintenance, repairs, or keeping a spare ready so you can get back to spraying instead of strip-cleaning parts mid-job.
Standout feature: 2.0mm nozzle size for dependable pressure pot spraying
A fresh nozzle helps maintain consistent material flow and pattern stability, especially when your current nozzle is worn or has been damaged by dried coating or over-cleaning.
-
R263,00
AirCraft Service Kit Trigger Only For LM3000 Spray Gun (SG LM3000-SK06)
At a Glance: Trigger-only service kit with replacement pin and washers/bushes to restore smooth, tight trigger movement.
The AirCraft SG LM3000-SK06 Service Kit is the quick fix when the trigger on your LM3000 spray gun starts feeling loose, worn, or rough.
A spray gun trigger lives a hard life—constant movement, cleaning solvents, and general wear can introduce play in the pivot point or make the action feel gritty.
This trigger-only kit replaces the key wear items around the trigger pivot so you can bring back a tighter feel, smoother travel, and more predictable control while spraying.
Refresh the trigger pivot for better control
A sloppy trigger can make feathering and steady spraying more difficult, especially when you’re working on edges or blending.
By servicing the trigger pivot components, you improve the “feel†of the gun and help keep trigger movement consistent.
Ideal for routine maintenance, refurb work, or keeping downtime low in a busy workshop.
-
R90,00
AirCraft Service Kit Washers and O-Rings For LM3000 Spray Gun (SG LM3000-SK08)
At a Glance: Washer and O-ring seal kit to refresh key sealing points and help prevent leaks on LM3000 spray guns.
The AirCraft SG LM3000-SK08 Service Kit is the small-parts hero that keeps your LM3000 spray gun operating cleanly and consistently.
Washers and O-rings do the unglamorous but critical job of sealing air and fluid paths—when they harden, flatten, swell, or get nicked, you’ll start seeing drips, air leaks, unstable settings, and inconsistent spray performance.
This kit replaces the common washers and O-rings used across the LM3000 assembly, helping you restore proper sealing, reduce mess, and keep your spray gun working the way it should.
Fresh seals = fewer leaks and more predictable spraying
Many “mystery†spray gun problems come down to tired seals.
Replacing washers and O-rings during servicing is a smart preventative maintenance step—especially after heavy use, aggressive solvents, or long storage.
Ideal for routine servicing, refurbishment, or keeping a kit on hand for quick leak fixes.
-
R79,00
AirCraft Fluid Nozzle Joint SG-H827-18 For SG-H827 Spray Gun
At a Glance: Threaded fluid nozzle joint/connector that helps secure and seat the nozzle assembly for a proper seal and stable spray output.
The AirCraft SG-H827-18 Fluid Nozzle Joint is a precision connector component used in the AirCraft SG-H827 spray gun nozzle area.
This joint plays an important role in keeping the fluid nozzle assembly correctly seated and aligned. When the nozzle joint is worn, damaged, cross-threaded, or contaminated with dried coating, it can lead to poor sealing, inconsistent flow, and spray patterns that refuse to stay consistent.
Replacing the fluid nozzle joint helps restore a solid, leak-free connection around the nozzle area—supporting cleaner atomisation and more predictable finishing results.
Secure Nozzle Seating and Better Sealing: the SG-H827-18 Nozzle Joint
A stable nozzle connection helps the needle and nozzle seal correctly, reducing dripping and improving consistency. Match the Cat No. SG-H827-18 to ensure correct fitment for your SG-H827 spray gun.
-
R70,00
AIR DISTRIBUTION RING FOR SG LVLP SPRAY GUN
-
R70,00
PIN LOWER TRIGGER FOR SG LVLP SPRAY GUN
-
R70,00
PIN UPPER TRIGGER FOR SG LVLP SPRAY GUN
-
R54,00
E RING FOR SG LVLP SPRAY GUN
-
R52,00
AirCraft Filter Maintenance Kit (SG-AB17)
At a Glance: Maintenance kit for servicing AirCraft filter units and keeping air lines clean
Dirty air is the silent troublemaker in a workshop—causing poor tool performance, sticky valves and inconsistent spray results. The AirCraft SG-AB17 Filter
Maintenance Kit is a practical service solution designed to help you maintain your air filter unit so it can keep doing its job: removing contamination from
your compressed air supply. Regular maintenance helps protect downstream tools and equipment, improves reliability, and keeps your air system running smoother
for longer.
Service your air filter, protect your tools – the SG-AB17 maintenance kit
Air preparation components work hard every day. A proper maintenance kit helps you refresh key service parts, reduce pressure drop, and keep filtration
performance consistent—especially important for spray equipment and precision pneumatics.
-
R158,00
AirCraft Service Kit Trigger Valve Components For LM3000 Spray Gun (SG LM3000-SK05)
At a Glance: Trigger and valve component service kit to restore smooth trigger movement and reliable air valve operation on LM3000 spray guns.
The AirCraft SG LM3000-SK05 Service Kit is designed to bring your LM3000 spray gun’s trigger action back to smooth, predictable control.
A worn trigger pivot, damaged trigger hardware, or a tired valve component can cause sticky trigger movement, inconsistent air start-up, or leaks that make spraying frustrating (and messy).
This kit replaces the key trigger and valve-related parts so you can regain clean on/off response, steadier control, and a more consistent spraying experience.
Smoother trigger feel for better spray control
The trigger is your “control surface†for the entire spray process—if it’s rough or loose, your pattern and flow become harder to manage.
Servicing the trigger and valve components helps restore proper alignment and dependable valve actuation, which supports stable atomisation and repeatable results.
Ideal for routine maintenance, repairs, or keeping downtime low in a busy workshop.
-
R147,00
AirCraft Spray Gun HVLP Spare Paint Cup For Viper Series SG AC2000 (SG AC2000-4VP)
At a Glance: Replacement/extra paint cup for Viper Series SG AC2000 HVLP spray guns—keeps you spraying with less downtime.
A spare paint cup is the simplest way to make spraying smoother and faster—because stopping mid-job to scrub a cup is a productivity killer. The AirCraft SG AC2000-4VP is an HVLP spare paint cup designed for the Viper Series SG AC2000 spray gun range (including the SG AC2000-01VP, SG AC2000-02VP and SG AC2000-03VP). It’s ideal as a direct replacement if your original cup is damaged or missing, and it’s also brilliant as an extra cup for faster refills, quicker material changes and cleaner workflow. Keep one cup soaking while another works, or dedicate cups to primer/topcoat/clear to reduce contamination and keep your finish consistent.
Cleaner Workflow Upgrade: a spare cup that keeps your Viper Series spray gun moving
Extra cups reduce downtime and help prevent cross-contamination between coatings. It’s a small accessory that makes a big difference in busy workshops—especially when you’re swapping materials or spraying multiple jobs in a day.
Subaru piston ring set 4 cyl (000) 1.2x1.2x2