Showing 17–32 of 59 resultsSorted by latest
-
R608,00
Industrial Quality
5/16"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
R608,00
Industrial Quality
¼"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
R574,00
Size: 5/16 inch
[7,9mm]
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Advantages:
- Faster than a chisel by hand
- Consistent in size
- Strong joints
- Reliable joints
- Looks good
- Large glue surfaces enhancing the strength
- Convenient
-
R447,00
Clamp capacity: 150mm
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
G-clamps are extremely strong, thanks to the malleable cast iron construction
and the strong threaded spindle.
Application:
- Wood working
- Manufacturing
- Construction
- Automotive
-
R405,00
Length: 200 | 305 | 460 mm
QTY: 3 Piece Set
Application:
The Tork Craft Magnetic Tool organiser & holder is perfect for keeping tool
neatly organised in the kitchen, garden shed, garage or workshop, a great
addition for any toolshop or storage area. Powerful magnets can hold random
metal tools in place. Comes with installation screws. 5mmm pre-drilled
fixing holes.
- Keeps tools neatly organised
- Great for a toolshop or storage area
- Powerful magnets
- Comes with installation screws
- 5mm pre-drilled fixing holes
- Includes 3 sizes
Sizes Included
NOTE:
Always consider the object weight, shape and material thickness. Thicker
materials with larger/more flat profiles will adhere better to the magnetic
strip. For larger objects to be stored, additional magnetic strips could be
added for extra support.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R350,00
A1408: 275 mm C-Type Welding Vice Grip Pliers
The FIXMAN C-Type Welding lock grip pliers (also referred to as a
chain vice grip pliers) is made of
6140 Chrome-Vanadium steel. The ergonomic shape of the handles and
non-slip coating ensure comfort.
-
R331,00
Tork Craft 6-Piece Welding Magnetic Set
Highlights: Set of six heavy-duty magnetic clamps for welding and fixture work
The Tork Craft 6-Piece Welding Magnetic Set makes holding and positioning steel assemblies a breeze—no more juggling clamps and angles. Each magnetic clamp in this set offers strong holding power and flexible positioning for fabricators, welders and metal-shop professionals.
Whether aligning frames, fixing together sheet metal, tack welding brackets or setting up jigs, these magnets help you reduce setup time and improve accuracy. Built tough for workshop environments, this set adds real efficiency to your fabrication process.
-
R279,00
Jaw width: 80mm
Opening: 75mm
A corner clamp, specifically one with dimensions 80x75mm, is a tool used to hold two pieces of material at a precise 90-degree angle, facilitating accurate and stable assembly.
The corner clamp can be used for framing or light weight joinery.
There is a cutting groove to allow a framing handsaw to cut a mitre at 45°.
Application:
- DIY
- Wood working
- Picture Frame Holding
- Workshop
-
R287,00
Tork Craft Vice Jaws Magnetic Aluminium 200 mm × 32 mm – 2 Piece Rubber Face
Highlights: 200 mm width × 32 mm face height, aluminium body, rubber-face surfaces for protective clamping
The Tork Craft Vice Jaws Magnetic Aluminium 200 mm × 32 mm – 2-Piece Rubber Face set is built for demanding setups where high-precision, gentle clamping of finished or sensitive work-pieces matters. These jaws magnetically attach to standard vise bodies and combine robust magnetic holding with rubber-faced clamping surfaces that protect surfaces, reduce slippage and preserve part quality.
Built from lightweight but strong aluminium and integrated with magnetised bases, the jaws are ideal for clamping ferrous parts during machining, inspection, fabrication and finishing operations. The rubber-face surfaces help secure the part without marring or marking, making this set a smart choice for finished assemblies, soft metals, inspection setups and high-accuracy workholding where every detail counts.
-
R273,00
Tork Craft Vice Jaws Magnetic Aluminium 200 mm × 32 mm – 2 Piece Prism Face
Highlights: 200 mm width × 32 mm face height, aluminium body, prism-face design for multi-angle clamping
The Tork Craft Vice Jaws Magnetic Aluminium 200 mm × 32 mm – 2 Piece Prism Face set is engineered to enhance your workshop’s clamping capability with quick magnetic jaws that deliver precision and flexibility. These jaws are designed to replace or upgrade your standard vise jaws, bringing magnetic versatility to tasks like machining, inspection, grinding or fabrication.
Constructed from lightweight yet strong aluminium and equipped with magnetised bases, the jaws securely grip ferrous work-pieces and the prism-face configuration allows for clamping at 90°, 45° or flat surfaces. This makes it ideal for holding round stock, profiles, plates or odd-shaped components with ease and speed, all while maintaining alignment and reducing setup time.
-
R314,00
The quick-adjust band clamp provides even pressure when clamped on a variety of shapes and sizes of workpieces. The
length of the band clamp is 4m and it includes (x4) 90° corner pieces.
The band clamp is ideal for picture framing and furniture fixings.
Application:
- Picture framing and furniture fixings
- Irregular shape clamping
- Woodworking
- DIY
-
R292,00
A1409: 275 mm C-Type Welding Vice Grip Pliers
The FIXMAN C-Type Swivel Jaw Tip Welding lock grip pliers (also referred to as a
chain vice grip pliers) is made of
6140 Chrome-Vanadium steel. The ergonomic shape of the handles and
non-slip coating ensure comfort.
-
R264,00
Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Rubber Face
Highlights: 150 mm width × 32 mm face height, aluminium body, rubber-face surfaces for gentle clamping
The Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Rubber Face set is engineered to enhance your precision work-holding with strong magnetic clamping and soft-face protection. These jaws magnetically secure to the standard vise body and deliver the cushioning, grip-and-go performance needed when handling finished, precision or delicate work-pieces.
Made from light yet durable aluminium with integrated magnetic bases, the jaws provide a secure hold on ferrous parts while the rubber-face surfaces prevent marring or movement. This makes them perfect for soft metals, polished components, inspection jigs or any setup where surface integrity and accuracy matter.
-
R256,00
Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Prism Face
Highlights: 150 mm width × 32 mm face height, aluminium body, prism-face design for multi-angle clamping
The Tork Craft Vice Jaws Magnetic Aluminium 150 mm × 32 mm – 2 Piece Prism Face set is engineered to enhance your workshop’s clamping capability with quick magnetic jaws that deliver precision and flexibility. These magnetic jaws are designed to replace or upgrade your standard vise jaws and bring magnetic versatility to tasks like machining, inspection, grinding or fabrication.
Crafted from lightweight yet strong aluminium and equipped with magnetised bases, the jaws securely grip ferrous work-pieces and the prism-face configuration allows for clamping at 90°, 45° or flat surfaces. This makes it ideal for holding round stock, profiles, plates or odd-shaped components with ease and speed, all while maintaining alignment and reducing setup time.
-
R266,00
Clamps in the set:
- (x1) G-clamp with 25mm clamp capacity.
- (x1) G-clamp with 50mm clamp capacity.
- (x1) G-clamp with 75mm clamp capacity.
Application:
The G-clamp is used to secure workpieces to a bench or a template during an
assembly. It can also be used in woodwork projects to glue/join pieces of wood.
The G-clamp is manufactured from carbon steel and has been powder coated.
-
R233,00
Tork Craft Vice Jaws Magnetic Aluminium 125 mm × 32 mm – 2 Piece Rubber Face
Highlights: 125 mm width × 32 mm face height, aluminium body, rubber-face design for protective clamping
The Tork Craft Vice Jaws Magnetic Aluminium 125 mm × 32 mm – 2 Piece Rubber Face set upgrades your vise for advanced workholding with care and precision. These jaws magnetically attach to your standard vise body, giving you the benefit of rubber-faced clamping surfaces that cushion and protect finish, prevent slipping and eliminate surface marring.
Crafted from lightweight aluminium with integrated magnets, the jaws are ideal when clamping round, square or irregular components during machining, inspection or fabrication. The rubber face ensures secure grip while preserving the surface of the workpiece — perfect for softer metals, finished parts or high-precision setups.
