Showing 193–208 of 259 resultsSorted by latest
Size: 115 mm diameter [Bore: 22.23 mm typical]
This 115 mm diameter turbo hot-pressed diamond blade from Tork Craft is designed for rapid, clean cuts in tile, granite, stone and marble. The turbo rim design provides aggressive cutting with good cooling and debris clearance — ideal for professional installers working hard materials.
Size: 210 mm diameter × 24 teeth [Bore: 16 mm]
Optimised for high-speed ripping tasks, this 210 mm diameter Tork Craft blade brings together efficient chip clearance and durable carbide-tipped teeth. With a 24-tooth geometry it’s built to push through timber and sheet goods with confidence, giving straight, reliable cuts time after time.
At a Glance: 165 mm diameter, 1.6 mm thin-kerf wood blade with 40 carbide-tipped teeth and 20 mm bore
The Tork Craft TCTK16540 saw blade is a versatile, thin-kerf circular blade built for clean, efficient cutting of wood. With a 165 mm diameter, 20 mm bore, and 40-tooth configuration, this blade is engineered to deliver smooth cross-cuts, rip cuts or trimming work in softwood, hardwood, plywood, MDF and other wood-based materials. Its thin kerf design reduces material waste and reduces load on the saw — ideal for handheld saws, compact saws or plunge saws, especially when working on finish-sensitive wood projects or when maximising efficiency and battery life in cordless tools.
The carbide-tipped teeth ensure a durable, long-lasting cutting edge and sharp, accurate cuts. The thin kerf reduces tear-out and material loss, while the 40-tooth pattern balances speed and finish quality — making it a reliable all-rounder for general wood cutting, cabinetry, carpentry and DIY projects. The universal 20 mm bore fits many standard circular and plunge saws.
Highlights: 170mm diameter Contractor Series TCT blade with 24 precision-tipped teeth, 20/16mm bore and 2.3mm kerf for dependable general-purpose cutting in wood and boards
The Tork Craft Contractor TCT Circular Saw Blade 170mm × 24T × 20/16mm is part of the Tork Craft Contractor Series — a professional-grade lineup engineered for reliable performance in demanding job-site and workshop environments. With 24 tungsten-carbide tipped teeth, this blade delivers a strong balance of speed, control and finish across softwood, hardwoods and wood-based panels.
Equipped with a 20mm bore and supplied with a 16mm reducing bush, it fits a broad range of circular saws commonly found on sites and in workshops. The moderate tooth count allows faster feed rates while retaining clean edges — making this blade ideal when you need robust performance and consistent results every day.
The Tork Craft Contractor Series TCT circular saw blade is a professional-quality tool range made for tradespeople who demand dependable durability and cutting performance job after job. These blades are not economy versions — they are built for sustained use, frequent cuts, diverse materials and tough conditions. Perfect for builders, carpenters and site teams who rely on tools that deliver without compromise.
Highlights: 165mm diameter Contractor Series TCT blade with 24 teeth, 20/16mm bore and 2.3mm kerf for dependable general-purpose cutting
The Tork Craft Contractor TCT Circular Saw Blade 165mm × 24T × 20/16mm is part of the Tork Craft Contractor Series — a robust professional-range blade engineered for consistent performance on site and in the workshop. With its 24 precision-tungsten-carbide-tipped teeth, this blade offers strong, reliable cuts through softwood, hardwoods and wood-based panels under demanding conditions.
Supplied with a 20mm bore together with a 16mm reducing bush, the blade will fit a wide selection of circular saws commonly used in professional workflows. The moderate 24-tooth count gives a balanced mix of speed and finish, making it ideal for trimming, cross-cutting and sizing tasks where you need professional results day after day.
The Tork Craft Contractor Series TCT circular saw blade is the professional-grade line built to deliver dependable performance for builders, carpenters and site-based tradespeople. These blades are designed to handle repeated cuts, varied materials and tough environments while delivering clean, consistent results. It is not an economy product — it’s engineered for professionals who demand reliability and quality as routine.
Size: 165 x 1.6 x 20 mm
Application: Wood | Plastic
Teeth: 24T
Bore: 20mm
Application:
The Tork Craft Tungsten Carbide Tipped Saw Blades, Ready to cut for your needs!
Contents Included
WARNING: Proper PPE clothing required
when working in a workshop or before starting a project.
| Description | Specifications |
| Packaging Type | Sandwhich Blister |
| Product Dimensions | 165 x 1.6 x 20 mm |
Size: 115 mm diameter [Bulk 3-Pack]
This professional bulk 3-pack from Tork Craft contains three 115 mm segmented-rim diamond blades designed for heavy-duty cutting of masonry materials—brick, block, concrete and stone. Engineered for fast progress in abrasive tasks and on job-sites where productivity counts.
Highlights: 180mm diameter Contractor Series TCT blade with 24 precision-tipped teeth, 20/16mm bore and robust build for dependable site or workshop cutting
The Tork Craft Contractor TCT Circular Saw Blade 180mm × 24T × 20/16mm belongs to the Contractor Series — a pro-grade blade designed for tradespeople who demand reliable performance. With 24 tungsten carbide-tipped teeth, it delivers strong, consistent cuts in softwoods, hardwoods and wood-based panels under real-world conditions.
Supplied with a 20mm bore and a 16mm reducing bush, this blade fits a wide array of circular saws used in both site and workshop settings. The 180mm size gives you extra cutting depth while maintaining manageable tool size, making it suitable for trimming, sizing, cross-cutting and general job-site tasks where reliability counts.
The Tork Craft Contractor Series TCT circular saw blade is a professional-grade tool range engineered for trades, builders and carpenters who expect consistent, durable cutting performance day in and day out. These blades are built to handle tough materials, frequent cuts and demanding environments — not an entry or economy variant, but a work-horse you can trust.
TYPE:
Hot press and segmented.
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. The diamonds are industrial
diamonds of different sizes and qualities depending on the material to be cut as
well a the blade type.
The individual diamond crystals exposed on the leading edge and the sides of
the segment or rim carry out the cutting. The operator pushes the rotating blade
into the material and the surface diamonds thus exposed mill a groove in the
material. When the blade mills the material, the latter exerts wear on the
blade. During cutting the exposed diamonds may crack
or break. The material simultaneously starts to abrade the metal matrix, which
releases more diamonds.
The more abrasive the material, the more rapid
the tendency to wear down the matrix. Blades for cutting hard, denseless
abrasive materials (such as tile, bricks, stone or cured concrete), require
a softer metal matrix.
This will wear down faster, replacing the worn diamonds
fairly quickly so that the blade continues to cut.
Blades for cutting soft,
abrasive materials (such as green concrete and asphalt), must have a hard,
abrasion-resistant metal matrix in order to retain the diamonds for a longer
time.
Water will prevent the blade from overheating:
It will greatly reduce the amount of harmful dust created by cutting. Remove the
slurry from the cut, and extend the life of the blade.
Size: 190 mm diameter × 40 teeth [Bore: 16 mm]
This robust 190 mm Tork Craft combination blade offers 40 carbide-tipped teeth and a 16 mm bore — ideal for varied woodworking tasks. Whether you’re ripping framing timber or making fine cross-cuts in sheet goods, this blade delivers a balance of speed, finish and durability. Engineered for tracking stability and backed by the trusted Tork Craft brand.
TYPE:
Hot press and continuous rim.
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segments. The segments or rims
are a mixture of diamond powder and metal powders. The diamonds are industrial
diamonds of different sizes and qualities depending on the material to be cut as
well a the blade type.
The individual diamond crystals exposed on the leading edge and the sides of
the segment or rim carry out the cutting. The operator pushes the rotating blade
into the material and the surface diamonds thus exposed mill a groove in the
material. When the blade mills the material, the latter exerts wear on the
blade. During cutting the exposed diamonds may crack
or break. The material simultaneously starts to abrade the metal matrix, which
releases more diamonds.
The more abrasive the material, the more rapid
the tendency to wear down the matrix. Blades for cutting hard, denseless
abrasive materials (such as tile, bricks, stone or cured concrete), require
a softer metal matrix.
This will wear down faster, replacing the worn diamonds
fairly quickly so that the blade continues to cut.
Blades for cutting soft,
abrasive materials (such as green concrete and asphalt), must have a hard,
abrasion-resistant metal matrix in order to retain the diamonds for a longer
time.
Water will prevent the blade from overheating:
It will greatly reduce the amount of harmful dust created by cutting. Remove the
slurry from the cut, and extend the life of the blade.
Size: 180 mm diameter × 60 teeth [Bore: 30/20/16 mm]
This 180 mm diameter Tork Craft TCT saw blade features 60 carbide-tipped teeth and a multi-bore hub (30 mm / 20 mm / 16 mm). It’s ideal for both ripping and cross-cutting wood and sheet materials, offering versatility, broad machine compatibility and a smoother finish than lower-tooth blades.
<!--
Stages: Sinter, Fine & Carbon
-->
A jigsaw blade is a thin, narrow blade with a series of teeth along one edge. It’s designed to be used in a jigsaw,
a power tool that moves the blade up and down in a reciprocating motion.
This set includes a variety of different sizes and will help you to choose the right jigsaw blade as choosing the
correct jigsaw blade is important for achieving clean, efficient cuts and preventing damage to the blade.
Application:
Diameter: Ø230mm
Thickness: 1.8mm
Bore Size: 22.2mm
<!-- -->
Get superior performance and exceptional value with the 3+1 Free Industrial Metal Cutting Disc, measuring 230 x 1.8
x 22.2 mm. Engineered for demanding industrial applications, this high-quality cutting disc delivers fast, precise,
and clean cuts through various metals, minimizing burring and rework. Its optimized 1.8mm thickness strikes the
perfect balance between aggressive material removal and extended disc life. This special offer provides an
additional free disc with every three purchased, ensuring you stay productive and well-stocked for your metal
fabrication and cutting tasks.
Application:
Size: 185 mm diameter × 24 teeth [Bore: 30/20/16 mm]
Reliable, tidy cuts without the drama. This 185 mm, 40-tooth Tork Craft TCT blade is a true all-rounder for site and shop work. The combination tooth pattern balances speed and finish so you can rip framing stock in the morning and cross-cut sheet goods in the afternoon—no blade change required. Tungsten-carbide tips hold their edge, while an efficient plate and grind deliver smooth tracking through softwoods, hardwoods, plywood and MDF.
Size: 170 mm diameter × 40 teeth [Bore: 20/16 mm]
This 170 mm diameter saw blade from Tork Craft features 40 carbide-tipped teeth and dual bore sizing (20 mm / 16 mm), making it a versatile choice for both ripping and cross-cutting tasks in timber, sheet goods and general woodwork applications.
No products in the cart.