Showing all 10 resultsSorted by latest
-
R1 029,00
Core diameter: Ø80mm
Depth: 150mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R988,00
Core diameter: Ø70mm
Depth: 150mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R890,00
Core diameter: Ø125mm
Depth: 72mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R372,00
Core diameter: Ø75mm
Depth: 72mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R314,00
Adaptor length: 450mm
Thread: M22
Connection type: 13mm Hex
Application:
This is a Hex adaptor to connect the TCT hollow core bit to your rotary hammer
drill.
Make sure the threads are the same as the hollow core bit – M22 or M16.
Take note that there are 3 different hex shanks:
List of adaptors in Hex:
TC322239 – Hex adator 110mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322216 – 11mm Hex adaptor 110mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322226 – 13mm Hex adaptor 110mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322240 – 13mm Hex adaptor 200mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
-
R87,00
Tork Craft Pilot Drill Bit Taper Shank for TCT Core Bits Long
Packaging: Hanging Sleeve
This high-quality pilot drill bit from Tork Craft is built to mate with long TCT core bits, providing a taper shank for stable connection and improved starting accuracy in concrete and masonry drilling. With a strong build and precise geometry, it keeps your core drilling setup aligned and reduces wobble, improving both finish and endurance.
-
R200,00
Adaptor length: 110mm
Thread: M16
Connection type: 11mm Hex
Application:
This is a Hex adaptor to connect the TCT hollow core bit to your rotary hammer
drill.
Make sure the threads are the same as the hollow core bit – M22 or M16.
Take note that there are 3 different hex shanks:
List of adaptors in Hex:
TC322239 – Hex adator 110mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322216 – 11mm Hex adaptor 110mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322226 – 13mm Hex adaptor 110mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322240 – 13mm Hex adaptor 200mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
-
R196,00
Adaptor length:
200mm
Thread: M16
Connection type: SDS Max
Application:
This is an SDS Max adaptor to connect the TCT hollow core bit to your rotary
hammer drill.
Make sure the threads are the same as the hollow core bit – M22 or M16.
List of adaptors in SDS Max
TC322222 – SDS Max adaptor 200mm x M16
TC322243 – SDS Max adaptor 300mm x M22
TC322234 – SDS Max adaptor 400mm x M22
-
R185,00
Core diameter: Ø45mm
Depth: 72mm
Adaptor thread: M22
Application:
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
maximum durability.
- There are various adaptors available to fit on different rotary hammers
(sold seperately).
- There is a 72mm or 150mm length
available.
Adaptors according to length:
110mm
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
200mm
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
300mm
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
400mm
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
450mm
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
A kit is also available
–
TC322010
Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
-
R124,00
Size: M16 x 200mm
<!-- 
-->
The SDS Plus Adaptor is a robust accessory designed to connect TCT (Tungsten Carbide Tipped) core bits to a standard
SDS Plus rotary hammer drill. With a length of 200mm, it provides extended reach for drilling deep holes, while the
M16 thread ensures a secure and stable connection to the core bit. This adaptor is essential for professionals in
construction, plumbing, and electrical trades, allowing them to efficiently cut clean, precise holes in materials
like brick, concrete, and masonry. Its SDS Plus shank facilitates quick and tool-free bit changes, boosting
productivity on job sites.
Application:
- Drilling through brick and masonry
- Installing electrical boxes and wiring
- Plumbing installations
- HVAC (Heating, Ventilation, and Air Conditioning) installations
- General construction and renovation
