Showing 17–32 of 62 resultsSorted by latest
Main areas of use
Adapted for
in self-service display pack
Warranty all-inclusive
The two connecting pieces allow users to connect two guide rails so that they are straight and stable. The self-aligning function makes it quick and convenient to connect the guide rails. The connecting pieces are compatible with all Festool guide rails. They ensure precise cuts over the entire length of two or more connected guide rails.
Connects guide rails as if they were made from a single piece.
Strengths and benefits
Adapted for
Items included
SW 5/SW 3 combination hex key, in self-service display pack
Warranty all-inclusive
Create pocket holes with twice the strength using the Kreg Pocket-Hole Jig XL. This extra-large jig makes it easy to build big and build strong using 2×4 or 4×4 boards, paired with the impressive holding power of XL Pocket-Hole Screws.
The Pocket-Hole Jig XL features hardened-steel drill guides that position the stepped XL drill bit at the perfect angle for extra-large pocket holes. The two drill guides position a pair of pocket holes at ideal spacing on the width of a 2×4 or 4×4 – but spacing can be adjusted by twisting the two drill guides apart easily to use them separately.
The GripMaxx™ material on the underside of the jig helps it stay put while you drill. The jig includes a clamp pad adapter to secure your jig easily with Kreg clamps, as well as many other brands.
Combined with the strength of XL Pocket-Hole Screws, which are specially engineered with extra holding power, the Pocket-Hole Jig XL is perfect for building big.
Take your 700-Series Pocket-Hole Jig to the next level by creating custom plugs from any wood
With the Custom Plug Cutter Drill Guide Kit, you can hide prominent pocket holes in your projects with perfectly matched plugs made from any wood you choose. The Plug Cutter allows you to create face grain plugs that blend in amazingly well, whether the plugs are in line with the grain, or they run across the grain. These face grain plugs blend in better than conventional plugs that have visible end-grain.
In addition, the Custom Plug Cutter accepts accessory bits (sold separately) that can cut plugs for Kreg Micro-Pocket™ and HD pocket holes. The Plug Cutter Drill Guide Block simply slips into a Pocket-Hole Jig 720 or 720PRO in place of the normal drill guide block. That allows you to clamp your plug material in place and drill in the same way that’s used for creating pocket holes. To create the plugs, just chuck the plug cutting bit into any drill. The high-performance bit features a specially designed cutting tip that shears cleanly for a smooth, even plug. Fluting reduces heat and friction for better plugs and longer bit life, while a positive stop collar ensures perfect depth every time to produce accurately sized plugs. Once the plugs are drilled, they can easily be cut free using a band saw or hand saw.
Drill guide for use only with 700-Series Pocket-Hole Jigs.
Premium screws designed for use with the Kreg® Deck Jig
Create a better, more beautiful deck with Kreg® Deck Screws and a Deck Jig. Designed to work with the Kreg® Deck Jig, these superior-quality screws feature a self-tapping tip and aggressive threads for fast, easy driving, plus a smooth upper shank to help pull deck boards tightly against the joist. Made from solid stainless steel for ultimate corrosion resistance, these Deck Screws are case-hardened for superior strength without snapping. The small trim-head size and neutral color also makes Kreg Deck Screws great for a variety of other outdoor projects. 2′ length for 4/4 and 5/4 decking.
The heavy-duty solution for building with wood
Efficient Design and Hardened-Steel Drill Guides
Designed with the same tried-and-true efficient design and hardened-steel drill guides as the original Kreg Pocket-Hole Jig, the Pocket-Hole Jig HD lets you create joints in 1 1/2′ and thicker materials that are an amazing 50% stronger than traditional Kreg Joints™. If you are framing walls, building deck railings, outdoor furniture, or any other large project, you always want the strongest joint possible; and this is where the Kreg Pocket-Hole Jig HD excels — strength.
Great for 2x4s and 1 1/2′-Thick and Larger Stock
The Kreg Pocket-Hole Jig HD is optimized for working with 2x4s and 1 1/2′ thick and larger stock. It utilizes #14 heavy-duty, hardened-steel screws that provide incredible shear-resistance, as well as three anti-corrosion layers for incredible long-term moisture resistance.
Works As a Stand-Alone Jig
The Pocket-Hole Jig HD works great as a stand-alone jig. Simply connect it to your Kreg Face Clamp, lock it into place, and take it where you need to go. Depending on the project, the Kreg Pocket-Hole Jig HD can also connect directly to your model K3, K4, or K5 benchtop base for upright drilling.
Portable 360° clamping station for wood projects
For 360° clamping on the go, check out the Heavy-Duty Bench Clamp System. It combines a 3′ Bench Clamp with a thick 10′ x 10′ powder-coated steel plate. Rubber feet allow this system to be used anywhere. Or, the plate can be recessed into a work surface.
Thanks to Automaxx® auto-adjust technology, the Bench Clamp adjusts to match material thickness automatically with a simple squeeze of the handles — whether the material is thick, thin, or in between. The clamp allows easy regulation of clamping pressure with a simple thumbscrew.
The Right Angle Clamp makes projects with 90° joints faster and easier than ever by giving you the helping hand you need to hold the parts in position as you drive in the screws. Just slip the pin on the Right Angle Clamp into a pocket hole, close the clamp, and it draws the mating pieces tightly together.
The swivelling clamp pad opposite the pin grabs the mating piece securely. Thanks to Automaxx® auto-adjust technology, the Right Angle Clamp adjusts to match the material automatically with a simple squeeze of the handles. This handy clamp works with all kinds of materials, from thin 1/2′ plywood to thick 2×4 boards.
Clamp Using the Pocket Hole
The steel pin on this clamp is shaped to fit snugly into a pocket hole, securely anchoring one workpiece against the other for easy assembly. Just drive a screw into an adjacent pocket hole while the Right Angle Clamp holds the piece steady for you.
Swivel Pad for Solid Clamping
The arm opposite the pin features a pad that swivels to fit tight against your material, so you can count on solid clamping without a chance of the joint shifting.
Ultra-Wide Reach
Whether you’re joining two thin drawer sides for a cabinet, or thicker materials to frame an outdoor project, the Right Angle Clamp opens wide to get the job done.
Use One Clamp, or Use Two
Many woodworkers find it handy to use two Right Angle Clamps when assembling large workpieces. Place a clamp on each end to hold the wood while you drive screws in the remaining pocket holes.
The DOMINO connector revolution: Produce perfect timber connections quicker and more easily than ever before. With the new corner and flat connectors for the DOMINO XL DF 700 joining machine, we have made further revolutionary developments to the DOMINO idea. These connectors provide frame, rack and board connections that will impress you with extreme precision and stability as well as maximum flexibility and unique efficiency.
Connect even quicker, and release if necessary. The DOMINO connector revolution.
Strengths and benefits
Main areas of use
Items included
64 x dowel half-shells, in carton
Warranty all-inclusive
Create a better, more beautiful deck
Create a better, more-beautiful deck with the Kreg® Deck Jig™. This concealed-fastening system works together with Kreg Deck Screws to allow you to install decking without visible fasteners, so all you see is the beauty of your decking instead of a bunch of screws.
The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes, and to guide Deck Screws to attach decking from the edge solidly and invisibly—whether you’re using solid-wood or composite deck boards.
The Deck Jig makes drilling the stepped pilot holes and driving screws easy in all situations thanks to three hardened-steel guides — one at 90° to the board edge, and two at opposing 45° angles — that allow easy access when working near walls, as well as when creating strong joints where boards butt together end to end. The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw, while a stop collar ensures perfect drilling depth.
After drilling, just drop a Kreg Deck Screw — an integral part of this concealed-fastening system — into the same guide, and then drive it with the included square-drive driver bit. It’s equipped with a stop collar, too, to ensure that the self-tapping, case-hardened screw gets driven to the perfect depth. The aggressive threads bite securely into the joist while the smooth upper shank and flat-bottom head work together to pull the deck board tightly into place.
The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood—kiln—dried after treatment (KDAT) recommended.
To ensure that you use the proper screws for your deck build, visit our Screw Selector to select the right type of screw for your application.
The Kreg® 90° Corner Clamp gives you the helping hand you need to hold 90° corners and ‘T’ joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° Corner Clamp leaves both of your hands free to add your fasteners. The 90° Corner Clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.
The 90° Corner Clamp helps hold assemblies like boxes, cabinets, drawers, and cases together to ensure that you get strong, tight-fitting assemblies — whether you’re using Kreg pocket-hole joinery, or another method. The clamp’s V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg Screws, or even another type of fastener, such as a nail or wood screw.
The 90° Corner Clamp features all-metal construction, including cast-aluminum pads — an outer ‘V’ and inner wedge — that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases.
Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you’re using thin plywood for drawers, or materials up to 1′ thick.
Make perfectly straight cuts up to 4 feet in sheet goods with guided cutting
Cut sheet goods down to size with precision and ease by using the Kreg® Straight Edge Guide. Work with material up to 4 feet and get the cuts you need — whether you’re using a circular saw, jigsaw, or trim router. (Works with most brands.)
The Kreg Straight Edge Guide offers an intuitive and approachable way to break down sheet goods. Your saw rides against the aluminum guide, allowing you to make straight and precise cuts. Guided cutting makes it easier than ever to see exactly where you’ll cut so you can get the results you expect.
First, align your cuts quickly and precisely with the cutline indicators. Cutline indicators make alignment to your pencil marks easy, so you can work confidently knowing you’ll make the cut exactly where you need it. Then secure the guide to your material using the low-profile GripMaxx™ clamps that are built right into the guide. And now you’re ready to make a cut!
The Straight Edge Guide Extension is available in 2-foot sections for projects that require greater cutting capacity. The Straight Edge Guide XL is also available for cuts in material up to 8 feet.
The True-FLEX™ Featherboard gets its name from the careful engineering that went into its design. Many Featherboards on the market today apply too much pressure or not enough pressure to the workpiece, which results in imperfect cuts and less than safe operation.
The True-FLEX™ Featherboard provides a consistent and optimum pressure, and will stand up to years of heavy use in your woodshop. The Featherboard is made from an extremely durable plastic composite body and includes a Wedge-Lock™ System that allows the Featherboard to be secured to a variety of shop tools without the need for additional hardware.
Whether you’re using a miter slot or a T-slot, working on a table saw or a router table, the Wedge-Lock™ System adjusts accordingly and lets you work with confidence. Designed for use in standard 3/8′ x 3/4′ (9mm x 19mm) miter slot..
Quick, Convenient Clamping with Automatic Adjustment
Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes — 3′ reach and 6′ reach — these versatile clamps have large clamp faces that distribute clamping force evenly and won’t mar delicate surfaces. They are compatible with the Kreg Pocket-Hole Jig, R3’s, Clamp Pad Adapter and the Kreg Pocket-Hole Jig Portable Base.
Auto-Adjust Technology
Thanks to Automaxx® auto-adjust technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2′ plywood without ever readjusting the clamp.
Easy-to-Regulate Clamping Pressure
Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.
Highly-Durable Construction
Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.
Quick, Convenient Clamping with Automatic Adjustment
Wood Project Clamps are perfect for Kreg Joinery, project assembly, general clamping, and more. Available in two sizes — 3′ reach and 6′ reach — these versatile clamps have large clamp faces that distribute clamping force evenly and won’t mar delicate surfaces. They are compatible with the Kreg Pocket-Hole Jig, R3’s, Clamp Pad Adapter and the Kreg Pocket-Hole Jig Portable Base.
Auto-Adjust Technology
Thanks to Automaxx® auto-adjust technology, Wood Project Clamps adjust to match material thickness automatically with a simple squeeze of handles — whether the material is thick, thin, or in between. You can clamp a 2×4 and then a piece of 1/2′ plywood without ever readjusting the clamp.
Easy-to-Regulate Clamping Pressure
Easily regulate clamping pressure with a simple thumbscrew. Just set your desired pressure by turning the thumbscrew for more or less pressure. Once the pressure is set, the clamp maintains consistent clamping pressure with every thickness.
Highly-Durable Construction
Wood Project Clamps are designed to withstand years of heavy use, thanks to heavy-duty, all-metal construction. They also have ergonomic padded grips for comfort and ease-of-use.
Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut™ Circular Saw Edge Guide.
The Kreg® Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want — up to 24′ — using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24′) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.
No products in the cart.