Showing 2449–2464 of 4680 resultsSorted by latest
-
R44,00
AirCraft Insert Elbow PU 10mm
At a Glance: 90° push-in elbow connector for 10mm PU (polyurethane) tubing
The AirCraft SG APLJ10 Insert Elbow PU 10mm is a solid choice for routing larger pneumatic lines neatly through tight spaces without forcing the tubing into sharp bends. Designed for 10mm polyurethane (PU) tube, this 90° elbow helps prevent kinks, reduces strain at the connection point, and keeps your compressed air layout looking clean and professional—ideal for workshop air systems, machinery and pneumatic tools.
Quick-connect elbow design for tidy, reliable air line routing
This push-in elbow fitting locks tubing in place with a simple push, and releases via the collar for quick changes during servicing. It’s a practical way to route 10mm pneumatic tubing around corners while maintaining a compact install and dependable connection.
-
R44,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 12mm (1pc Pack) (SBM1260P)
At a Glance: 1/4" Male Thread to 12mm Hose Tail – Convenient 1pc Pack
When you only need one fitting to complete an install or sort a quick repair, the AirCraft SBM1260P is the tidy, toolbox-friendly option.
This solid brass hose tail connector joins a 12mm hose to a 1/4" male threaded connection—ideal for workshop compressed air lines, compressor plumbing,
and pneumatic routing where a secure hose grip matters. Push the hose fully onto the barb, clamp it correctly, then thread the male end into a compatible
female port for a clean, serviceable connection.
Single-pack AirCraft brass connector for neat 12mm hose-to-threaded joins
The 1pc pack format makes it perfect for maintenance kits and small jobs. Brass offers good corrosion resistance in typical workshop environments and keeps
connections easy to assemble, inspect and service over time.
-
R44,00
AirCraft Insert Manifold Side 4-Port PU 4mm (SG APKJ04)
At a Glance: 4-Port Side Insert Manifold with 4mm Push-In Tube Connections
Build a clean, compact pneumatic layout with the AirCraft SG APKJ04 insert manifold. Designed as a side-entry distribution fitting, it gives you four quick push-in ports for 4mm pneumatic tubing—perfect for splitting a single air supply into multiple lines for valves, actuators, air assist points and small automation setups. Neat routing, quick assembly, and fewer fittings to juggle: that’s the whole vibe.
Compact 4-Port Distribution for 4mm Pneumatic Tubing
This side insert manifold is ideal where space is tight and you want multiple outlets in one tidy body. Push-in connections make it quick to assemble and easy to service when you need to change or reroute tube runs.
-
R44,00
AirCraft Filter Maintenance Kit (SG-AB17)
At a Glance: Maintenance kit for servicing AirCraft filter units and keeping air lines clean
Dirty air is the silent troublemaker in a workshop—causing poor tool performance, sticky valves and inconsistent spray results. The AirCraft SG-AB17 Filter
Maintenance Kit is a practical service solution designed to help you maintain your air filter unit so it can keep doing its job: removing contamination from
your compressed air supply. Regular maintenance helps protect downstream tools and equipment, improves reliability, and keeps your air system running smoother
for longer.
Service your air filter, protect your tools – the SG-AB17 maintenance kit
Air preparation components work hard every day. A proper maintenance kit helps you refresh key service parts, reduce pressure drop, and keep filtration
performance consistent—especially important for spray equipment and precision pneumatics.
-
R44,00
AirCraft PU Fitting Straight Stud With O-Ring 12mm x 1/8" BSP Male (SG SPC12-G01)
At a Glance: 12mm push-in tube to 1/8" BSP Male (M) thread with O-ring seal
Keep your air system neat and efficient with the AirCraft SG SPC12-G01 straight stud fitting. Built to connect 12mm pneumatic tubing to a 1/8" BSP male threaded port, it combines a push-in collet for quick tube installation with an O-ring seal to help reduce leaks at the port face. It’s a reliable choice for workshop pneumatic lines, compressor setups, regulators and manifolds—anywhere you want a tidy straight-through connection that holds pressure with confidence.
Standout feauture or series/quality/range: O-ring sealed straight stud reliability
The integrated O-ring supports a strong seal where the fitting meets the port, helping minimise air loss and keeping your system running smoothly with less fuss.
-
R44,00
Application:
To loosen or tighten screws to a desired material. Technicians, hobbyist and DIY
users.
- Magnetic tip
- Anti-rust precision screwdrivers
- Free rotating end cap
- Hanging hook hole
- Handle: Cellulose Acetate Plastic and Rubber
- Body: Chrome Vanadium (CrV)
-
R44,00
AirCraft PU Hose Fitting Y Joint 10mm x 1/8" M BSP (SPX10-01)
At a Glance: Y-branch fitting with two 10mm push-in outlets and a 1/8" Male BSP threaded connection.
The AirCraft SPX10-01 PU Hose Fitting Y Joint 10mm x 1/8" M BSP is a compact, dependable way to branch a single threaded air port into two 10mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 10mm ports and a reliable 1/8" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/8" Male BSP thread
Push your 10mm hoses in to lock, then screw into a 1/8" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R44,00
AirCraft PU Fitting Straight Stud With O-ring 8mm – 1/2" M BSP (SPC08-G04)
At a Glance: Push-in 8mm tube x 1/2" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC08-G04 straight stud fitting is built for clean, reliable pneumatic connections on larger ports—now with the added sealing advantage of an O-ring.
Push your 8mm PU tube into the quick-connect collar for a strong grip, then screw the 1/2" BSP male thread into your manifold, regulator block, compressor accessory port or pneumatic equipment.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter, cleaner 1/2" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—ideal for maintaining consistent airflow and reducing air loss on larger ports.
-
R44,00
Size: 10.0mm
Short side: 38mm
Long side: 170mm
An L-wrench hex key, also known as an Allen key, is a simple yet essential hand tool used to tighten or
loosen bolts and screws with a hexagonal socket head. It’s named for its characteristic ‘L’ shape, which provides
two gripping points for better leverage and control.
Application:
- Used to drive bolts and screws with internal hexagonal (six-sided) sockets and grub screws.
- Manufacturing
- Electronics
- Construction
- DIY
-
R44,00
Shank:
T-shank
Distance between teeth: 4mm
Total length: 180mm
Teeth Per Inch: 6TPI
Packaging: Pack of 2
Application:
The jigsaw blades are used to cut:
Compatibility:
- AEG
- ATLAS-COPCO
- BOSCH
- DEWALT
- ELU
- FESTOOL
- HITACHI
- MAKITA
- METABO
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
-
R44,00
Size:
3/8′ (9.5mm)
Length: 65mm
Packaging: Bulk
Application:
The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head
screws.
The nutsetter features:
- Standard six-point design
- Magnet to fold screws
Use with our SNAP-IT! range quick change connectors:
-
R44,00
AirCraft Nipple Brass 1/4×3/8 Male/Male (SB1212P (Packaged for display))
At a Glance: Brass nipple adaptor with 1/4 x 3/8 male/male threads for pneumatic connections.
The AirCraft SB1212P (Packaged for display) brass nipple is a practical adaptor designed to join two female-threaded pneumatic components while stepping between 1/4 and 3/8 thread sizes.
With male/male threads, it’s ideal for building or repairing compressed-air lines on regulators, filters, manifolds, couplers and air distribution hardware—especially when you want a clean, direct connection without stacking multiple adaptors.
Brass construction offers durability and corrosion resistance, making it a solid choice for workshop pneumatic systems where reliable sealing matters.
A neat male/male adaptor for stepping between 1/4 and 3/8 fittings
Pneumatic plumbing is all about correct sizing. The SB1212P (Packaged for display) helps you adapt cleanly between common thread sizes, keeping your air setup tidy and reducing the chance of annoying air leaks caused by mismatched fittings.
-
R44,00
AirCraft Nipple Brass 1/8×3/8 Male/Male (SB1210P (Packaged for display))
At a Glance: Brass nipple adaptor with 1/8 x 3/8 male/male threads for pneumatic connections.
The AirCraft SB1210P (Packaged for display) brass nipple is a compact adaptor designed to join two female-threaded pneumatic components while stepping between 1/8 and 3/8 thread sizes.
With male/male threads, it’s ideal for building or repairing compressed-air lines on regulators, gauges, valves, manifolds and couplers—especially when you want a clean, direct connection without stacking multiple adaptors.
Brass construction makes it a solid workshop choice thanks to its durability and corrosion resistance, helping keep your air system reliable and service-friendly.
A simple male/male adaptor that keeps air systems tidy and leak-resistant
The right fitting saves time, air, and frustration. The SB1210P (Packaged for display) helps you adapt between common thread sizes properly, keeping your pneumatic layout neat and reducing the chance of annoying little leaks.
-
R44,00
Drill diameter: Ø9.5mm
Packaging: Carded 1
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:
-
R44,00
AirCraft Swivel Connector 1/4" Male BSP (ARO Type)
At a Glance: 1/4" M BSP swivel connector with ARO-type quick-connect end to reduce hose twist
Give your air tools a bit more freedom with the AirCraft SG6000 Swivel Connector 1/4" Male BSP (ARO Type). This clever little adaptor adds a swivelling connection
point between your air line and tool setup, helping to reduce hose twist as you move around the job. The result is a more comfortable working angle, less strain on fittings,
and a cleaner, more controllable hose run—especially handy with spray guns, air tools, and tight workspaces where the hose loves to fight back.
Standout feauture or series/quality/range Swivel action that keeps the hose from wrestling you
The swivelling joint helps the hose follow your movement instead of twisting up, which can improve handling and help extend the life of your hose and connectors.
-
R44,00
Length: 120mm
Width: 70mm
Thickness: 25mm
Grit: Medium
<!-- ![]()
-->
This dual-angled sanding sponge block is an indispensable tool for achieving a smooth, professional finish on a
variety of surfaces. Measuring a comfortable 120x70x25mm, its unique design features two angled sides, allowing for
superior access into corners, crevices, and contoured areas that traditional sanding methods might miss. The medium
grit provides effective material removal and surface preparation, making it ideal for sanding wood, paint, plaster,
and more. Durable and reusable, this single sanding sponge block offers excellent conformity to surfaces, ensuring
consistent pressure and a flawless result whether you’re working on DIY projects or professional applications.
Application:
- Woodworking
- Drywall and Plaster Work
- Paint Preparation and Removal
- Metal and Plastic
- DIY
