Showing 2513–2528 of 4680 resultsSorted by latest
-
R42,00
Works with Kit NR8012 or NR5012
Thread length: 10 mm
Qty: 5 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R42,00
Classification: Standard (Yellow)
The straight router bit is an essential, versatile workhorse in any woodworking shop, designed to make clean,
straight cuts into a workpiece.
Characterized by its flat bottom and parallel cutting edges—often featuring two flutes and a durable carbide
tip—this bit is the go-to tool for a wide range of basic and complex routing applications. It excels at creating
square-sided, flat-bottomed recesses such as grooves, dadoes (grooves cut across the wood grain), rabbets (shoulders
cut along the edge), and mortises for strong joinery and shelving.
Available in a vast array of diameters and lengths, including specialized variations like flush-trim and pattern
bits with guide bearings, a quality straight bit ensures precision and consistent results across various materials,
including natural woods and wood composites.
This fundamental cutter is valued for its ability to deliver smooth, accurate cuts for cabinet construction, inlay
work, and general edge-trimming tasks, making it a foundational and cost-effective accessory for both novice and
professional woodworkers.
Application:
- Router bits are for use with router machines only.
- Be sure that at least 3/4 of the shaft length is inserted into the router collet.
- Do not ‘bottom-out’ the bit in the collet. The shank should be 1/8′ from the bottom of the collet.
- Route in two or more passes when large amounts of stock must be removed.
- Carpenters
- Craftsmen
- Hobbyists
- Woodworking
- DIY
-
R42,00
Tork Craft Magnetic Nutsetter 3/8 × 48 mm (Carded)
Highlights: 3/8 mm socket size × 48 mm length, magnetic bit holder for fast nut and screw driving
The Tork Craft Magnetic Nutsetter 3/8 × 48 mm (model TCNNS10048C) is designed to make fastening tasks quicker and cleaner by incorporating a strong magnet in the bit holder, ensuring nuts and screws stay securely in place as you drive them.
This compact, carded accessory is ready for your power drill or impact driver and suits repetitive fastening work where speed and reliability matter—ideal for workshop, maintenance and installation tasks. It supports standard screw-and-nut sizes and gives you a dedicated magnetic grip for efficiency.
-
R42,00
Application:
The turbo point drill is designed for professional individuals who desire an
aggressive cut in metals. The drill is designed with a standard 118°
point, but shaped with a self-centering turbo point for cleaner entry and fast
starts.
The drill bit is manufactured from HSS (hi-speed steel) and can
be used to drill materials such as iron, steel, non-ferrous metals and plastics.
The shank is designed to have three flattened sides to ensure
better grip in a 3 jaw chuck.
TIP:
When drilling hard metals, always use a coolant/lubricant. We recommend using
CT-90.
| APPOXIMATE DRILLING SPEEDS IN METAL: |
| DIAMETER |
RPM |
| 1.0 -2.0mm |
3500 |
| 2.5 – 3.5mm |
2500 – 2000 |
| 4.0 – 5.0mm |
1700 – 1400 |
| 5.5 – 6.0mm |
1400 – 1100 |
| 6.5 – 8.0mm |
1000 – 850 |
| 8.5 – 13.0mm |
800 – 500 |
-
R42,00
Application:
The turbo point drill is designed for professional individuals who desire an
aggressive cut in metals. The drill is designed with a standard 118°
point, but shaped with a self-centering turbo point for cleaner entry and fast
starts.
The drill bit is manufactured from HSS (hi-speed steel) and can
be used to drill materials such as iron, steel, non-ferrous metals and plastics.
The shank is designed to have three flattened sides to ensure
better grip in a 3 jaw chuck.
TIP:
When drilling hard metals, always use a coolant/lubricant. We recommend using
CT-90.
| APPOXIMATE DRILLING SPEEDS IN METAL: |
| DIAMETER |
RPM |
| 1.0 -2.0mm |
3500 |
| 2.5 – 3.5mm |
2500 – 2000 |
| 4.0 – 5.0mm |
1700 – 1400 |
| 5.5 – 6.0mm |
1400 – 1100 |
| 6.5 – 8.0mm |
1000 – 850 |
| 8.5 – 13.0mm |
800 – 500 |
-
R42,00
AirCraft PU Hose Fitting Elbow With O-ring 10mm-1/4" M BSP
At a Glance: 10mm push-in tube connection to 1/4" Male BSP thread with an O-ring seal in a compact 90° elbow.
A clean corner turn with extra sealing support for larger pneumatic tubing. The AirCraft PU Hose Fitting Elbow With O-ring 10mm-1/4" M BSP connects 10mm pneumatic tubing to a 1/4" BSP female port using a fast push-in connection, giving you a tidy 90° elbow right at the port. The integrated O-ring supports sealing at the port face on compatible connections, helping reduce leak risk on compressors, regulators, FRLs, manifolds and pneumatic tool systems where space is tight and reliability matters.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal
Quick push-in tube connection paired with an O-ring at the thread to help deliver a tidy, leak-resistant finish in compact pneumatic installations.
-
R42,00
Tork Craft Precision-Max Step Point Drill Set — 3.0 mm HSS (2-Piece)
Dial in neat, accurate holes with step-point geometry that starts true and resists walking. This 3.0 mm, high-speed steel (HSS) twin-pack is ideal for pilot holes, small fasteners and detail work in mild steel, aluminium, plastics and thin sheet materials.
-
R42,00
Size: 3/8′ (9.5mm)
Length: 45mm
Packaging: Bulk
Application:
The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head
screws.
The nutsetter features:
- Standard six-point design
- Magnet to fold screws
Use with our SNAP-IT! range quick change connectors:
-
R42,00
Works with Kit NR8012 or NR5012
Thread length: 5 mm
Qty: 10 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R41,00
Size: TX9
Length: 50mm
Torque limit (Nm): 3.4
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R41,00
Size: TX8
Length: 50mm
Torque limit (Nm): 2.6
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R41,00
Size: TX7
Length: 50mm
Torque limit (Nm): 1.7
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R41,00
Size: TX5
Length: 50mm
Torque limit (Nm): 0.5
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R41,00
Size: TX4
Length: 50mm
Torque limit (Nm): 0.37
<!-- ![]()
-->
A Torx classic power bit is a specialized type of screwdriver bit designed to fit and drive Torx screws, which have
a six-lobed star-shaped head. These bits are commonly used in various industries, including automotive, electronics,
and manufacturing, due to their ability to provide a secure and reliable connection.
Application:
- For driving screws when using a screw driver.
- Construction
- Manufacturing
- DIY
-
R41,00
FIXMAN 3/8′ DRIVE HEX SOCKET 23MM
-
R41,00
AirCraft PU Hose Fitting 4-Way Connector 12mm (SG APZ12)
At a Glance: Push-in 4-way cross connector for 12 mm pneumatic tubing
Bring order to busy air-line setups with the AirCraft SG APZ12 PU Hose Fitting 4-Way Connector (12mm). This compact push-to-connect cross fitting allows you to split, join or re-route airflow across four 12 mm tube runs in one neat junction. It’s a solid choice for workshop compressed-air distribution, pneumatic circuits and general air-line management where you want clean routing without bulky manifolds. Push the tubing in to lock it securely, and use the release collars when it’s time to adjust or service the system.
Space-Saving 12mm 4-Way Push-In Connector For Tidy Pneumatic Builds
The SG APZ12 cross connector helps you keep larger-bore pneumatic lines organised while maintaining a compact footprint. It reduces extra adaptors, simplifies routing, and makes future changes quicker and cleaner.
