Showing 2529–2544 of 4680 resultsSorted by latest
-
R41,00
AirCraft Reducing Manifold 1/8" x 3/8" F/F (SB1247P) 1 Piece Pack
At a Glance: 1/8" to 3/8" female-to-female reducing manifold for stepping between air-line sizes
Air systems don’t always follow a single neat standard—sometimes you’ve got a small port on one component and a larger fitting on the next.
The AirCraft SB1247 reducing manifold is the tidy solution, giving you a female-to-female (F/F) connection that steps from 1/8" to 3/8".
It’s ideal for adapting mismatched pneumatic components on compressors, regulators, filters, manifolds and general compressed-air plumbing without
building an awkward stack of adaptors. Designed for practical workshop use, this connector helps keep your air-line layout compact, serviceable and
leak-conscious when installed correctly.
AirCraft Pneumatic Fittings – Simple Adaptors That Keep Systems Running
AirCraft fittings are made to help you create dependable compressed-air connections with cleaner layouts and fewer leak points.
This reducing manifold bridges two common sizes in one compact fitting.
-
R41,00
Tork Craft Wire Hand Block Brush with Wood Handle
At a Glance: Rectangular block brush with wood handle and steel wire bristles for manual surface cleaning and prep
The Tork Craft Wire Hand Block Brush with Wood Handle (Model TCW-HB02) is a robust, manually operated brush designed for cleaning, rust and paint removal, scale scraping and surface preparation on metal, wood, masonry or other solid materials. Its sturdy wood handle and broad rectangular wire-bristle block give you strong, even cleaning force across larger surface areas — perfect for gates, metal sheets, outdoor furniture, masonry walls or large metal structures. This brush is a practical, straightforward tool for maintenance, refurbishment, restoration and general workshop or DIY tasks where precision and control are required without power tools.
Durable hand-held block brush for heavy-duty surface prep and cleaning
With a comfortable wood handle and dense steel wire bristles over a wide block base, this brush offers an effective manual solution for removing rust, paint, scale, old coatings and debris. It is ideal when you need to clean large areas or long sections of material by hand, giving you even pressure and better control than wire-cup or power brushes. Great for outdoor maintenance, metalwork cleanup, or prepping surfaces before painting or welding — its straightforward design makes it a go-to for many home, workshop and construction tasks.
-
R41,00
Tork Craft Deep Socket — 14 mm (¼″ Drive), CR-V Steel, 12-Point (Model TC65014)
Packaging: Single deep socket carded
The Tork Craft 14 mm deep socket (¼″ drive) is engineered from chromium–vanadium steel for robustness and durability. With a 12-point profile for superior engagement and extended length to access recessed fasteners, it’s a smart addition to your workshop or toolbox when standard sockets cannot reach.
-
R41,00
AirCraft Nipple Brass 1/4×3/8 Male/Male (SB1212)
At a Glance: Brass nipple adaptor with 1/4 x 3/8 male/male threads for pneumatic connections.
The AirCraft SB1212 brass nipple is a practical adaptor designed to join two female-threaded pneumatic components while stepping between 1/4 and 3/8 thread sizes.
With male/male threads, it’s ideal for building or repairing compressed-air lines on regulators, filters, manifolds, couplers and air distribution hardware—especially when you want a clean, direct connection without stacking multiple adaptors.
Brass construction offers durability and corrosion resistance, making it a solid choice for workshop pneumatic systems where reliable sealing matters.
A neat male/male adaptor for stepping between 1/4 and 3/8 fittings
Pneumatic plumbing is all about correct sizing. The SB1212 helps you adapt cleanly between common thread sizes, keeping your air setup tidy and reducing the chance of annoying air leaks caused by mismatched fittings.
-
R41,00
Works with Kit NR8012 or NR5012
Thread length: 6 mm
Qty: 10 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R41,00
AirCraft Red Insert Straight PU 12mm – 6mm (SG APGJ12-06)
At a Glance; Reducing straight push-in connector for 12 mm to 6 mm pneumatic tubing
The AirCraft SG APGJ12-06 Red Insert Straight PU 12mm – 6mm is a clean, space-saving way to step down your air line from a high-flow 12 mm main run to a 6 mm tube. It’s ideal when you want the airflow capacity of a larger “backbone†line but need to connect to compact valves, cylinders, pilot lines, gauges, or smaller pneumatic accessories. Push-in connections keep installation quick and tidy, while the colour-coded red body makes reducers easy to identify in busy pneumatic layouts.
Standout feature: big-to-small transition without extra adaptors
Keep longer runs on 12 mm to help reduce pressure drop, then reduce to 6 mm only where the smaller circuit begins. This keeps systems efficient, neat, and far easier to troubleshoot later.
-
R41,00
Daimeter: Ø28.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R41,00
AirCraft Nipple Brass 3/8×3/8 M/m (SB1207)
At a Glance: Brass male-to-male nipple adaptor with 3/8 x 3/8 thread size for pneumatic connections.
The AirCraft SB1207 brass nipple is a dependable male-to-male adaptor designed for joining two female-threaded pneumatic components with matching 3/8 x 3/8 threads.
It’s ideal for building or repairing compressed-air lines, connecting couplers, regulators, valves, filters, manifolds and other air system hardware where a sturdy threaded connection is essential.
Brass fittings are a popular choice in workshop air systems because they’re durable and corrosion resistant—helping keep your air plumbing leak-resistant and service-friendly over the long term.
Strong, corrosion-resistant adaptor for clean compressed-air assemblies
A good fitting is the difference between “job done†and “why is my compressor cycling every two minutes?†The SB1207 helps you connect components properly and keep air lines neat, solid and easier to maintain.
-
R41,00
AirCraft PU Hose Fitting Tee 10mm x 3/8" Male BSP
At a Glance: Push-in tee for 10mm pneumatic hose with 3/8" M BSP threaded connection
Keep your pneumatic layout tidy while connecting into larger BSP ports with the AirCraft SPB10-03 PU Hose Fitting Tee 10mm x 3/8" Male BSP. This compact tee uses
push-in ports across the tee for 10mm PU pneumatic hose, and a 3/8" BSP male threaded port for connecting directly into manifolds, valves, regulators, FRL units,
gauges or other BSP female ports. It’s a practical solution for workshop air circuits, machinery and automation systems where you need a 10mm hose run plus a reliable
threaded take-off—without stacking adaptors.
Standout feauture or series/quality/range Push-in speed with a larger 3/8" BSP threaded outlet
Ideal for bridging a 10mm hose line into higher-capacity equipment ports—cleaner installs, fewer joints, and easier maintenance.
-
R41,00
AirCraft PU Hose Fitting Tee 10mm x 1/4" Male BSP
At a Glance: Push-in tee for 10mm pneumatic hose with 1/4" M BSP threaded connection
Split a 10mm air line cleanly while connecting into standard BSP components with the AirCraft SPB10-02 PU Hose Fitting Tee 10mm x 1/4" Male BSP. This compact tee
uses push-in ports across the tee for 10mm PU pneumatic hose, and a 1/4" BSP male threaded port for connecting directly into valves, manifolds, regulators, FRL units,
gauges or other BSP female ports. It’s ideal for workshop air circuits, machinery and automation systems where you want a tidy 10mm hose layout with a reliable threaded
take-off point.
Standout feauture or series/quality/range Push-in convenience with a 1/4" BSP threaded take-off
Perfect when your main hose run is 10mm but the equipment port is 1/4" BSP—this tee bridges the two neatly and reduces extra adaptors.
-
R41,00
AirCraft Insert Y Joint PU 8mm
At a Glance: Push-in Y connector for splitting or combining 8mm PU pneumatic tubing
The AirCraft SG APYJ08 Insert Y Joint PU 8mm is a clean, compact way to branch a pneumatic line without cluttering your setup with extra adaptors. Designed for 8mm polyurethane (PU) tubing, this push-in Y connector lets you split one air line into two outlets (or combine two lines into one, depending on your layout). It’s ideal for workshop air routing, machinery circuits and pneumatic systems where tidy line management and reliable connections matter.
Quick-connect Y branching for organised pneumatic line management
Push the tubing in to lock it securely, and use the release collar when it’s time to service or reroute the line. The Y configuration helps keep flow transitions smoother than a sharp T split, making it a practical option where space is limited and hose routing needs to stay neat.
-
R41,00
Tork Craft Grinding Disc — Steel, 115 × 8.0 × 22.23 mm
Built for daily fabrication work, the Tork Craft ABRG115-2 is a heavy-duty grinding wheel for steel (and suitable grades of stainless). The compact 115 mm diameter keeps control high on handheld grinders, while the 8.0 mm thickness and reinforced bond deliver stable grinding for bevels, weld seams and edge clean-ups. Standard 22.23 mm bore fits common 4½" angle grinders.
-
R41,00
AirCraft Nipple Brass 1/8×1/4 Male/male (SB1209P (Packaged for display))
At a Glance: Brass male-to-male nipple adaptor with 1/8 x 1/4 thread sizes for pneumatic connections.
The AirCraft SB1209P (Packaged for display) brass nipple is a handy male-to-male adaptor designed to connect two female-threaded pneumatic components where you need to step between 1/8 and 1/4 thread sizes.
It’s ideal for tidy compressed-air plumbing on regulators, gauges, valves, manifolds, couplers and air tool connections—especially when you want a clean, direct join without stacking multiple adaptors.
Brass construction makes it a solid workshop choice thanks to its durability and corrosion resistance, helping you keep your air system reliable and service-friendly.
A simple adaptor that makes pneumatic setups cleaner and easier to service
Pneumatic systems are basically a LEGO set for adults—except air leaks are the pieces that mysteriously vanish. The SB1209P (Packaged for display) helps you adapt between common fitting sizes properly, keeping your layout neat and your connections more dependable.
-
R40,00
Hole saw diameter:
ø67mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R40,00
Size: T55H
Drive: 3/8 inch
Application:
The Fixman 3/8 drive bit sockets are used with a torque wrench to tighten fasteners to required specifications, made of high-quality chrome vanadium steel. Has an increased contact area with a micro finish.
- Made of high-quality chrome vanadium steel
- Increased contact area
- CR-V steel body
- Micro finish
-
R40,00
FIXMAN 1/2′ DRIVE E-SOCKET 6 POINT E20
