Showing 2657–2672 of 4680 resultsSorted by latest
-
R185,00
AirCraft PU Hose Fitting Valve 1/2" Male x 1/2" Male Thread (SG HVSS04-04)
At a Glance: Inline adjustable flow control valve with 1/2" male thread x 1/2" male thread connections.
The AirCraft SG HVSS04-04 PU hose fitting valve is a solid, no-nonsense way to fine-tune airflow in larger pneumatic lines.
With 1/2" male threads on both ends, it installs neatly between compatible fittings, regulators, manifolds, and air tools, giving you quick, repeatable control of air delivery via the adjustment knob.
It’s ideal for reducing sudden surges, smoothing actuator movement, and taming aggressive tool response where controlled airflow improves results and helps protect equipment.
Inline airflow control with a clean 1/2" threaded fit
This valve works as an inline flow controller, allowing you to restrict or adjust airflow to suit the application.
It’s a handy addition for compressed air setups using 1/2" ports, and the flow direction marking helps ensure correct installation for predictable control.
-
R185,00
Tork Craft Polisher Service Kit Speed Control (38) For POL06
At a Glance: Genuine speed control service kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit speed control (Cat No. POL06-SK12) is a genuine replacement electronic module designed specifically for the
Tork Craft POL06 polisher. The speed controller regulates the motor speed so you can match the polishing action to the job – slow and controlled
for delicate surfaces, faster for more aggressive cutting. When this module fails, the polisher may lose variable speed, surge, run at one fixed
speed or stop working altogether. Replacing it with this original POL06-SK12 service kit restores smooth, repeatable speed control and gives new
life to a POL06 that still has a sound motor and gearbox.
Standout feature: Factory-matched speed control module for the POL06
As part of the official Tork Craft spare parts range, this speed control kit is rated and configured for the POL06 motor and electrics,
helping to maintain reliable soft-start and variable speed performance within the tool’s original design limits.
-
R185,00
Tork Craft Wire Cup Brush Twisted 100 mm × M14 (Bulk)
At a Glance: 100 mm diameter twisted-wire cup brush with M14 arbor, bulk pack — ideal for heavy-duty metal cleaning and surface prep
The Tork Craft Wire Cup Brush Twisted 100 mm × M14 (Bulk – model TCW TW10014B) is a heavy-duty wire brush built for the toughest cleaning and surface preparation jobs. Its twisted-steel wire filaments aggressively remove rust, scale, old paint, weld slag and coating residues from steel, cast iron and other metal surfaces. The cup design concentrates brushing action for effective cleaning even in corners, weld seams or uneven surfaces. Compatible with standard angle grinders and power tools using an M14 arbor, this brush is a robust choice for metal fabrication, welding workshops, automotive repair, and maintenance tasks — with multiple brushes supplied in a bulk pack for long-term use.
Twisted-wire cup brush in bulk — aggressive, reliable surface cleaning for workshops and fabrication
Whether you are prepping steel plates for welding, cleaning up weld seams, removing rust from structural components, or stripping paint and scale before coating, this bulk-pack brush gives you heavy-duty performance when you need it. With its 100 mm diameter and sturdy cup body, the brush delivers consistent, powerful cleaning action, while the bulk pack ensures you always have a replacement ready when wires wear out — ideal for busy workshops or regular maintenance routines.
-
R185,00
Tork Craft Contractor TCT Circular Saw Blade 180mm × 40T × 30/20/16mm
Highlights: 180mm diameter Contractor Series TCT blade with 40 precision-tipped teeth and 30/20/16mm multi-bore fitment for enhanced compatibility and reliable cutting
The Tork Craft Contractor TCT Circular Saw Blade 180mm × 40T × 30/20/16mm is part of the Contractor Series — a professional-grade blade built for tradespeople who rely on dependable, high-performance tools. With 40 tungsten carbide-tipped teeth, this blade delivers clean, efficient cuts through softwoods, hardwoods and engineered board materials in job-site or workshop conditions.
Featuring a multi-bore configuration (30mm as standard, with reducing bushes for 20mm and 16mm), this blade fits a wide selection of circular saws in both site and workshop environments. The robust Contractor Series construction and general-purpose tooth geometry make it a great all-round performer when you need professional-level cutting without compromise.
What is the Tork Craft Contractor Series TCT circular saw blade?
The Tork Craft Contractor Series TCT circular saw blade is a premium trade-focused range engineered for durability, precision and dependable use in demanding environments. These blades are not value alternatives — they are built for professionals who expect performance job after job, cut after cut, in challenging conditions.
-
R184,00
Length: 100mm
Square Drive: 1/4′ male
Hex Drive: 1/4′ male
<!-- 
-->
This product is a versatile universal socket adapter designed for convenience and adaptability. It features a
dual-ended design, with a 1/4′ square male drive on one side and a 1/4′ hex male drive on the other, allowing it to
connect to a wide range of tools. The adapter measures 100mm in length, providing extra reach for accessing
fasteners in tight or hard-to-reach spaces. Packaged on a card, this tool is ideal for a variety of tasks, from
driving sockets with a power tool to using hex bits with a ratchet, making it a handy addition to any toolbox.
Application:
- Automotive Repair and Maintenance
- Home Improvement
- Electronics and Small Appliances
- General Construction and Assembly
- DIY
-
R184,00
Tork Craft Drill Bit — HSS 18.0 mm Reduced Shank
A robust 18.0 mm high-speed steel (HSS) drill bit with a reduced shank design, allowing it to be used in chucks that can’t grip the full diameter. Suitable for heavy-duty drilling in metals, fabrication, and general workshop environments.
-
R184,00
Tork Craft Drill Bit — HSS 17.5 mm Reduced Shank
A heavy-duty 17.5 mm twist drill bit made from high-speed steel (HSS), featuring a reduced shank so it fits into chucks that can’t grip the full diameter. Perfect for structural, fabrication or engineering applications.
-
R183,00
AirCraft Metal PU Fitting Elbow 12mm (SG MPUL12)
At a Glance: 90° elbow fitting for 12mm pneumatic tubing
When you’re running larger air lines, neat routing makes a big difference. The AirCraft SG MPUL12 Metal PU Fitting Elbow is a tough
90° pneumatic connector designed for 12mm tubing, helping you turn corners cleanly without forcing tight bends that can restrict airflow.
Ideal for workshop and light industrial compressed-air setups, including compressors, FRL units (filters/regulators/lubricators), manifolds and air distribution lines where dependable connections and tidy pipework matter.
High-flow friendly 90° metal elbow for cleaner pneumatic plumbing
This elbow fitting helps maintain a smoother tube path while reducing strain on the line, especially in compact installations.
A practical spare part for maintenance and upgrades when you want a professional finish and reliable air delivery.
-
R183,00
AirCraft Metal PU Fitting T-Joint 12mm x 1/4′ Male (SG MPT12-02)
At a Glance; 12mm push-in T fitting with a 1/4" male threaded branch for clean air line splitting.
The AirCraft SG MPT12-02 Metal PU Fitting T-Joint makes it easy to branch a 12mm pneumatic line into a common 1/4" threaded port—neatly and reliably. It connects two 12mm pneumatic/PU tubes in-line and adds a 1/4" male threaded outlet for a secondary connection, ideal for installing a gauge, valve, regulator feed or an extra air line. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy, serviceable and reliably sealed.
Branch your 12mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a threaded port for accessories or branch connections.
-
R183,00
AirCraft Metal PU Fitting T-Joint 12mm x 1/8′ Male (SG MPT12-01)
At a Glance; 12mm push-in T fitting with a 1/8" male threaded branch for clean air line splitting.
The AirCraft SG MPT12-01 Metal PU Fitting T-Joint is a compact, workshop-ready way to add a branch connection to a 12mm pneumatic line while keeping the layout neat and serviceable. It connects two 12mm pneumatic/PU tubes in-line and provides a 1/8" male threaded outlet for a secondary connection—ideal for a gauge, valve, regulator feed or an extra air line. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system tidy and reliably sealed.
Branch your 12mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a threaded port for accessories or branch connections.
-
R183,00
Buffing pad density: Medium
Diameter: Ø150mm
Bore: Ø12.5mm
Application:
The
buffing pad is used together with a chuck adaptor spindle supplied with the
TC874 polishing kits.
Alternatively the
TC336 arbor would also fit the buffing pad.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R183,00
90° Countersink
with drill bit
A convenient power tool accessory. Allows you to drill a hole and simultaneously
countersink the hole for screws.
A
common use is to allow the head of a countersunk bolt or screw, when placed in
the hole, to sit flush with or below the surface of the surrounding material.
This accessory will just allow you to drill and countersink in a singel step.
Accurate at all times and a very neat job.
A countersink is a conical
hole cut into a manufactured object.
-
R183,00
Sanding belt for Belt Sander – 120 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R183,00
Sanding belt for Belt Sander – 80 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R183,00
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R183,00
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
510mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 510mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
