Showing 2689–2704 of 4680 resultsSorted by latest
-
R179,00
Diameter: 22 mm
Length: 300 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R178,00
Size: 68 mm
Application:
Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials.
Bi-metal refers to an object that is composed of two separate metals joined together. Instead of being a mixture of two or more metals, like alloys, bimetallic objects consist of layers of different metals.
- Ideal for cutting stainless steel, mild steel, iron, aluminium, pvc &
wood
- Improved chip clearance
- Cobalt steel
- Alternating tooth patten
- Material release slots to clear material efficiently
- Ultra thin kerf for accurate cuts
- 38mm cut depth for all sizes
- Use mandrel, TC17002, TC17003, TC17007
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R178,00
Tork Craft Diamond Blade — 115 mm Turbo Hot Pressed (Professional)
Size: 115 mm diameter [Bore: 22.23 mm typical]
This 115 mm diameter turbo hot-pressed diamond blade from Tork Craft is designed for rapid, clean cuts in tile, granite, stone and marble. The turbo rim design provides aggressive cutting with good cooling and debris clearance — ideal for professional installers working hard materials.
-
R178,00
For sizes: 32 – 152mm
Pilot Drill: 6.35mm
Shank: 7/16′ HEX
Application:
The Tork Craft Mandrel for
Tungsten Grit hole saws, fits most different brands of tungsten grit hole saws, able to cut into
stone, ceramics and fibreglass. for hole saw sizes between 32 – 152 mm
- First most tungsten grit hole saw brands
- For hole saw sizes between 32-152mm
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R178,00
Drill Bit Diameter: Ø6.7mm
Tap Dimensions: M8 x 1.25mm
This set is typically used in metalworking applications, such as creating holes for screws or bolts in metal plates
or sheets. The drill bit is used to create a pilot hole of the appropriate size, and then the tap is used to cut the
threads into the hole.
The tap in this set is an HSS tap, which means it is made of high-speed steel. HSS is a type of steel that is very
hard and tough, making it ideal for tapping. The tap has a diameter of 8mm and a pitch of 1.25mm. The pitch is the
distance between the threads.
The drill bit in this set is a 6.7mm drill bit. This means that it has a diameter of 6.7mm. The drill bit is used to
create a pilot hole that is slightly smaller than the diameter of the tap. This pilot hole helps to guide the tap
and prevent it from binding.
Application:
- For cutting internal threads
- Construction
- Manufacturing
- DIY
-
R178,00
Works with Kit NR5005
Thread length: 5 mm
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R178,00
Works with Kit NR5004
Thread length: 4 mm
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R178,00
Carded Pack: Qty 3
Application:
- For cutting internal threads
- Standard, Pipe & metric sizes
- Produced to exacting specifications
- Rust & Tarnish resistant
- Cut cleaner more accurate threads
- Four flutes for extra chip clearance
- Right handed threaded taps in plug style
What you need to cut internal threads:
- Correct size tap
- Proper drill bit or hole
- Proper lubricant (light weight oil in ferrous metals & Paraffin or
beeswax for cutting alumnium. Do not use oil when cutting cast iron)
- Tap wrench
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R177,00
Diameter: 8 mm
Cutting Length: 10 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, and brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is 40000RPM.
- For cutting stainless steel, steel, cast iron, high alloy & brass
- Smooth surface finish
- Max Operating speed: 65 000RPM
- Recommended Operating speed: 40 000RPM
NOTE:
The recommended starting speed is 40 000 RPM
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R177,00
Diameter: 6 mm
Cutting Length: 3 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, and brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is 40000RPM.
- For cutting stainless steel, steel, cast iron, high alloy & brass
- Smooth surface finish
- Max Operating speed: 65 000RPM
- Recommended Operating speed: 40 000RPM
NOTE:
The recommended starting speed is 40 000 RPM
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R177,00
AirCraft PU Hose Fitting Valve 3/8" Male x 1/2" Male Thread (SG HVSS04-03)
At a Glance: Inline adjustable flow control valve with 3/8" male thread x 1/2" male thread connections.
The AirCraft SG HVSS04-03 PU hose fitting valve is a practical solution for controlling airflow while adapting between two larger pneumatic thread sizes.
With a 3/8" male thread on one end and a 1/2" male thread on the other, it installs neatly between compatible fittings, regulators, manifolds, and air tools, giving you quick, repeatable control of air delivery via the adjustment knob.
It’s ideal for reducing sudden surges, smoothing actuator movement, and taming aggressive tool response where controlled airflow improves results and helps protect equipment.
Inline airflow control with mixed threaded connections
This valve works as an inline flow controller, allowing you to restrict or adjust airflow to suit the application.
It’s especially useful when your setup requires a threaded transition between 3/8" and 1/2" ports without adding extra adaptors.
The flow direction marking helps ensure correct installation for predictable control.
-
R177,00
The Slogging Spanner is a versatile and heavy-duty tool designed for industrial and mechanical applications where high torque is required. This robust spanner is built to handle demanding tasks and is an essential tool for professional mechanics, construction workers, and maintenance technicians.
The spanner is crafted from 31CrV (Chrome Vanadium) and ensures durability and longevity, making it suitable for tough working conditions and repetitive tasks.
The unique feature of the Slogging Spanner is its large and thick profile, which allows for increased torque application. This design enables you to apply significant force to tighten or loosen bolts and nuts, making it ideal for heavy-duty applications where conventional wrenches may not be sufficient.
The Slogging Spanner comes in a variety of sizes from 24mm – 85mm to accommodate different bolt and nut dimensions. It is important to select the appropriate size for the specific task to ensure a proper fit and optimal performance.
-
R176,00
Application:
The set includes a total of 22 cleaning and polishing mini tools that can be used with any Tork
Craft rotary mini tools.
We recommend using the
TCMT001 rotary tool with the set.
Rotary mini tool included kits:
Accessories sets:
TC08070 |
70 Pc mini tool accessories set |
TC08051 |
180 Pc mini tool accessories set |
TC08022 |
22 Pc cleaning & polishing set |
TC08034 |
34 Pc sanding & grinding set |
TC08050 |
50 Pc cutting & carving set |
TC08052 |
52 Pc general purpose set |
TC08072 |
72 Pc cut-off wheel set |
-
R176,00
Carded Pack: Qty 1
Application:
- For cutting internal threads
- Standard, Pipe & metric sizes
- Produced to exacting specifications
- Rust & Tarnish resistant
- Cut cleaner more accurate threads
- Four flutes for extra chip clearance
- Right handed threaded taps in plug style
What you need to cut internal threads:
- Correct size tap
- Proper drill bit or hole
- Proper lubricant (light weight oil in ferrous metals & Paraffin or
beeswax for cutting alumnium. Do not use oil when cutting cast iron)
- Tap wrench
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R176,00
Tork Craft TCT Circular Saw Blade — 210 × 24T × 16 mm (General-Purpose Rip)
Size: 210 mm diameter × 24 teeth [Bore: 16 mm]
Optimised for high-speed ripping tasks, this 210 mm diameter Tork Craft blade brings together efficient chip clearance and durable carbide-tipped teeth. With a 24-tooth geometry it’s built to push through timber and sheet goods with confidence, giving straight, reliable cuts time after time.
-
R176,00
AirCraft Metal Swivel Elbow 12mm x 3/8′ Male (SG MPH12-03)
At a Glance; 12mm push-in tube connection to 3/8" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH12-03 Metal Swivel Elbow is built for pneumatic systems that need a clean corner turn into a larger threaded port—without twisting the tubing or stressing the connection. It connects 12mm pneumatic tubing to a 3/8" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening. That means tidier routing, reduced strain on the tube and a more dependable, leak-resistant seal over time. Ideal for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where space is limited and reliability matters.
Strong, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector for 12mm tubing and larger pneumatic ports—keeps routing tidy and alignment easy for professional results.
