Showing 2817–2832 of 4680 resultsSorted by latest
-
R162,00
QTY: 3 Piece Set
Application:
The Tork Craft Magnetic Inspection tool for inspecting areas with restricted
access. Flexible head allows for better accuracy, magnetic pickup allows for
pickup of small parts that fell into hard to reach places. Telescopic handle
extends to correct length and allows for easy storage.
- Inspecting areas with restricted access
- Flexible head
- Magnetic pickup for small parts in hard to reach places
- Handle extends and allows easy storage
- Pocket clip for easy access
Included
- 1 x Telescopic Magnet 1.5kg pickup
- 1 x Round inspection mirror 30 mm
- 1 x Elliptoid inspection mirror 25 x 50mm
- 1 x Pocket Clip
NOTE:
This product is not insulated
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R162,00
Tork Craft Replaceable Jaw Set — for Bolt Cutter 350 mm (TC601350-01)
Packaging: Spare parts kit (jaw set + screws)
Extend the life of your Tork Craft 350 mm bolt cutter by replacing the jaws with this genuine kit. It includes both cutting jaws and the required mounting screws, giving your tool renewed performance and accuracy. Ideal for workshop maintenance and heavy-use environments.
-
R162,00
AirCraft PU Hose Fitting Valve 1/8" Male x 1/4" Male Thread (SG HVSS02-01)
At a Glance: Inline adjustable flow control valve with 1/8" male thread x 1/4" male thread connections.
The AirCraft SG HVSS02-01 PU hose fitting valve is a compact, practical way to fine-tune airflow in your pneumatic system while adapting between two common thread sizes.
With a 1/8" male thread on one end and a 1/4" male thread on the other, it installs neatly between compatible fittings, regulators, manifolds, and air tools to help you control air delivery with a quick twist of the adjustment knob.
Ideal for reducing sudden surges, taming aggressive tool response, or smoothing actuator movement where consistent airflow makes a noticeable difference.
Inline airflow control with mixed threaded connections
This valve works as an inline flow controller, allowing you to restrict or adjust airflow to suit the application.
It’s especially useful when your setup requires a threaded transition between 1/8" and 1/4" ports without adding extra adaptors.
The flow direction marking helps ensure correct installation for predictable control.
-
R162,00
Daimeter: ø15.0mm
Shank: 3 flattened sides
Application:
A MAD bit is referred to as a Multi Angle
Drill bit.
The drill bit is designed to cut smoothly in all directions. It allows you to
have full control of the cutting path, thanks to its ingenious geometry.
Multi Angle Drill bits can cut in a curve or straight. It works great for decking,
floor boards, stair cases or even if you want to build your own pergola. It is an
addition to any woodworking project. It also gives the professional user the unique
capability to rectify misalignment errors.
The drill bit is coated with Titanium nitride to add longer life to the cutting
edges.
Used for:
- Drilling
- Routing
- Milling
- Channeling
Recommended speeds:
- Soft wood: 2400RPM
- Hard wood: 700RPM
-
R162,00
Diameter: 24 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R162,00
Drill diameter: Ø4.0mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is precision fully ground
at 135° with a split point. The drill bit can be used to drill materials such
as iron, steel, non-ferrous metals and plastics.
Advantages:
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will cut most materials.
Industrial HSS 135° angle point drill bits are designed to cut metal. The
split point adds 2 extra cutting edges with the adantage of reducing the amount
of pressure required to perform the cut.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
-
R162,00
Drill diameter: Ø3.8mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is precision fully ground
at 135° with a split point. The drill bit can be used to drill materials such
as iron, steel, non-ferrous metals and plastics.
Advantages:
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will cut most materials.
Industrial HSS 135° angle point drill bits are designed to cut metal. The
split point adds 2 extra cutting edges with the adantage of reducing the amount
of pressure required to perform the cut.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
-
R162,00
Tork Craft Plier Wire Stripper — 160 mm
Packaging: Single unit
This 160 mm wire-stripper plier from Tork Craft offers a reliable solution for removing insulation from wires while protecting the conductor underneath. It’s built for professional or maintenance use, with a robust body and comfortable handle grip to support repeated operations in electrical, service or installation environments.
-
R162,00
AirCraft PU Hose Fitting Valve 8mm x 3/8" Male Thread (SG HVSF03-08)
At a Glance: Inline adjustable flow control valve with 8mm push-in tube fitting and 3/8" male thread connection.
The AirCraft SG HVSF03-08 PU hose fitting valve gives you practical, hands-on airflow control in pneumatic lines where a larger threaded connection is required.
With an 8mm push-in tube connection and a 3/8" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and general pneumatic circuits where smooth response and repeatable settings matter.
Adjust the knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for smoother pneumatic performance
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially useful for controlling actuator speed, softening tool response, or stabilising air delivery along a line.
The flow direction marking assists correct installation for consistent, predictable control.
-
R162,00
AirCraft PU Hose Fitting Valve 6mm x 3/8" Male Thread (SG HVSF03-06)
At a Glance: Inline adjustable flow control valve with 6mm push-in tube fitting and 3/8" male thread connection.
The AirCraft SG HVSF03-06 PU hose fitting valve is a compact, reliable way to control airflow in pneumatic lines where a larger threaded connection is needed.
Featuring a 6mm push-in tube connection and a 3/8" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and pneumatic circuits where smooth response and repeatable control matter.
Adjust the knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for smoother pneumatic performance
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially useful for controlling actuator speed, softening tool response, or stabilising air delivery along a line.
The flow direction marking assists correct installation for consistent, predictable control.
-
R161,00
Hex
shank chuck for small and light work. Screw type keyless chuck that easily fits
into a1/4′ hex bit adapter or screwdriver. Perfect for hobbies and drilling
small holes.
- Easy to use and install
- Conveniently, safely and quickly
- Easily locks onto and releases drill bits
- Allows hex drive power tools to use conventional drill bits
- All metal construction
-
R161,00
Diameter: 18mm
Length: 400mm
Blade Length: 25mm
The Tork Craft SDS Max Flat Chisel is for chiseling applications in masonry and concrete, has a flat point for
chiseling and stripping of wall/floor tiles, plaster etc. Compatible with SDS Max shank machines.
Application:
- Contractor
- Construction
- Industrial
- Demolitions
- Strip tiles, breaking building materials and shaping.
-
R161,00
Drill diameter: Ø6.0mm
Packaging: Packet of 10
Point: 118°
Drill bit: HSS (Hi-speed steel)
Application:
The drill bit is made from HSS (hi-speed steel) and is roll forged.
Standard HSS 118° angle point drill bits are designed as an all purpose drill
bit and it will drill into steel, non-ferrous metals and plastic.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines to sharpen the HSS standard drill bits:
-
R160,00
MICROFIBRE CLOTH GREY – 20PC ROLL | 300mm x 300mm | 180GSM | TEAR-OFF
Product Code: SPC00105
Colour: Grey
Quantity: 20 Cloths per Roll (Perforated)
Cloth Size: 300mm x 300mm each
Material Weight: 180 GSM
Composition: 80% Polyester / 20% Polyamide
Product Overview:
This Grey Microfibre Cloth Roll is a convenient and space-saving solution for professional and home cleaning.
Pre-cut with tear-off perforation, each roll includes 20 reusable microfibre cloths designed for fast, efficient, and hygienic use.
The soft yet durable 180GSM fabric makes it perfect for everyday cleaning tasks.
Key Features:
- Tear-Off Roll Design: Easily dispense one cloth at a time without unfolding or cutting.
- Compact & Hygienic: Keeps cloths clean and ready to use—ideal for trolleys, kitchens, workshops, and more.
- Ultra-Fine Microfibre: Removes dust, grease, and grime using only water if needed.
- Non-Abrasive & Lint-Free: Safe for glass, electronics, painted surfaces, and stainless steel.
- Eco-Friendly: Replaces disposable wipes—machine washable and reusable many times over.
- Multi-Purpose: Suitable for household, automotive, janitorial, and commercial cleaning tasks.
Suggested Uses:
- Kitchens and countertops
- Automotive interiors and exteriors
- Monitors, TVs, and mobile screens
- Glass, mirrors, and chrome
- Offices and industrial workspaces
Care Instructions:
- Machine wash cold or warm
- Do not use fabric softeners or bleach
- Tumble dry low or air dry
- Do not iron
Upgrade your cleaning toolkit with this MICROFIBRE CLOTH GREY 20PC TEAR-OFF ROLL —
a smart, reusable alternative to single-use wipes and bulky cloths.
-
R160,00
Tork Craft Plastic Profile Gauge — 200 mm (Model ME04200)
This 200 mm plastic profile gauge from Tork Craft is designed to precisely copy irregular contours and shapes on a variety of materials. With a maximum profile depth of 45 mm, it’s perfect for transferring complex profiles such as skirting boards, flooring, trim work, and more.
-
R160,00
Drill diameter: Ø3.8mm
Packaging: Packet of 10
Point: 135° split point
Drill bit: HSS (Hi-speed steel)
Application:
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economical and practical. Ideal for autobody repair work.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
