Showing 2833–2848 of 4680 resultsSorted by latest
-
R160,00
This
an affordable router bit range that is well supported throughout South Africa. All
our Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRAND
in most retail stores.
At a glance:
½" Ø Shank router bit with a 11,1 mm (7/16") radius to profile
a roundover shape in wood.
Application:
This router bit is used with a plunge router to profile the edge of wood to produce
a rounded edge that has a 11,1 mm radius
Definition: The basic edge-forming
bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered
to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a
part of a complex one. Also known as roundover, rounding over, and quarter-round.
If a smaller pilot bearing is used, a second shoulder can be produced, in effect
making the bit a beading bit.
Please ensure that you select a router bit with a
shank (shaft) size that will fit your router. If are in doubt, contact us and we
will confirm if it will work for you.
-
R160,00
Size: 1/2 Inch
Width 5 Inch
Application:
The Tork Craft Impact extension bar is used to gain access to fasteners in locations that would otherwise be difficult to reach, full chamfer at drive opening for easy engagement with drive tools
- Impact extension bar is used to gain access to fasteners in locations that would otherwise be difficult to reach
- Male square is oriented in line with female squares for use with fixed head torque wrenches
- Full chamfer at drive opening for easy engagement with drive tools
- Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls
- Stamped size for easy reference
- Side locking hole
- Typically they are hardened to 40-50 HRC on rockwell scale
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R160,00
Sanding belt for Belt Sander – 120 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
457mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 457mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R160,00
Sanding belt for Belt Sander – 80 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
457mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 457mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R160,00
Sanding belt for Belt Sander – 60 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
457mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 457mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R160,00
Sanding belt for Belt Sander – 100 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
457mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 457mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R160,00
Sanding belt for Belt Sander – 40 Grit
Compatible with all belt sanders that require sanding belts 75mm wide and
457mm long.
High quality Aluminium Oxide belts for use with wood and metal.
Size: 75mm x 457mm
Grits Available: P40, P60, P80, P100, P120, etc.
We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machine’s lifespan.
-
R159,00
Cup Diameter: 115mm
Arbor: 22.23mm
Max RPM: 13 300
Segment Configuration: Double Row
Classification: Yellow (Standard)
<!-- 
-->
This cold-pressed, double-row diamond cup wheel is an economical and versatile tool designed for surface grinding
and finishing. Measuring 115mm in diameter with a 22.23mm bore, it is compatible with most standard angle grinders.
The double-row segment design ensures efficient material removal and a smooth finish on a variety of masonry and
concrete surfaces, including stone, mortar, and brick. Its robust construction and aggressive grinding action make
it ideal for professional contractors and DIY enthusiasts alike who require a reliable and affordable tool for
leveling uneven surfaces, removing coatings, and preparing floors for new installations.
Application:
- Ideal for polishing: concrete, granite, masonry & other construction material.
- Smooth uneven joints and surfaces on concrete & stones.
- Preparation of surface for polishing application on granite.
- Surface clean-up & levelling.
-
R159,00
AirCraft Wash / Paraffin Gun Bulk (SG WG01) [BULK]
At a Glance: 750ml cup • Adjustable 2.0mm nozzle • 1/4" BSP Male air inlet • 0–15 bar working pressure
Meet the workshop clean-up hero that doesn’t mess around. The AirCraft SG WG01 Wash / Paraffin Gun is built to spray cleaning liquids with control and consistency—whether you need a gentle rinse or a heavier mist to lift stubborn grime. With a generous 750ml cup and an adjustable 2.0mm nozzle, it’s ideal for engines, equipment, tools, general workshop jobs, and even gardening or DIY applications where a controlled spray saves time and effort. Connect it to your compressor, dial in the airflow, and turn messy jobs into satisfying “before and after†moments.
Standout feauture or series/quality/range: Adjustable spray control for proper workshop cleaning
Go from light spray to heavy mist with a simple adjustment—perfect for rinsing, wetting, and cutting through oily build-up without flooding everything in sight.
-
R159,00
FIXMAN
reversible combination ratchet wrenches are made of durable chrome vanadium steel. The design includes
an increased working surface and micro finish. Available in sizes 6 to 32mm.
-
R159,00
Pull Force: 9kg
Weight: 191g
Angles: 15°, 45°, 60°, 90°, 120° & 135°
A magnetic multi-angle welding holder is a specialized tool designed to securely hold workpieces at various angles during welding, soldering, or assembly tasks. It’s a valuable asset for fabricators, metalworkers, and hobbyists alike.
Application:
- Used in welding, soldering, assembly, marking-off, pipe installations and demagnetizing.
- Can be used as a floater to separate steel plates, 0.3mm (maximum thickness)
- Manufacturing
- DIY
-
R159,00
Tork Craft Contractor TCT Circular Saw Blade 180mm × 24T × 20/16mm
Highlights: 180mm diameter Contractor Series TCT blade with 24 precision-tipped teeth, 20/16mm bore and robust build for dependable site or workshop cutting
The Tork Craft Contractor TCT Circular Saw Blade 180mm × 24T × 20/16mm belongs to the Contractor Series — a pro-grade blade designed for tradespeople who demand reliable performance. With 24 tungsten carbide-tipped teeth, it delivers strong, consistent cuts in softwoods, hardwoods and wood-based panels under real-world conditions.
Supplied with a 20mm bore and a 16mm reducing bush, this blade fits a wide array of circular saws used in both site and workshop settings. The 180mm size gives you extra cutting depth while maintaining manageable tool size, making it suitable for trimming, sizing, cross-cutting and general job-site tasks where reliability counts.
What is the Tork Craft Contractor Series TCT circular saw blade?
The Tork Craft Contractor Series TCT circular saw blade is a professional-grade tool range engineered for trades, builders and carpenters who expect consistent, durable cutting performance day in and day out. These blades are built to handle tough materials, frequent cuts and demanding environments — not an entry or economy variant, but a work-horse you can trust.
-
R159,00
Tork Craft Bent Nose Plier — 200 mm
This 200 mm bent-nose plier from Tork Craft features angled jaws designed for access in tight or awkward spaces, allowing you to grasp, bend or manipulate wire, components or assemblies with precision. The bent geometry gives better clearance around panels and brackets, making it ideal for mechanical, electrical and general workshop applications.
Application:
- Bending and cutting metal wire and electrical cable.
- Working with wire mesh, perimeter fences, and site barriers.
- Gripping, twisting, and holding wire.
- Long jaws to reach difficult places.
- 45° Bent Jaws for hard to reach places.
- Plumbing
- Construction
- Automotive
- DIY
-
R159,00
For sizes: 14 – 152mm
Pilot Drill: 6.35mm
Shank: 11mm
Application:
The Tork Craft Mandrel for bi-metal hole saws, fits most different brands of
bi-metal hole saws, able to cut into metal, wood and plastics. for hole saw sizes between 14 –
152 mm. Quick and easy to interchange between different saw sizes, no
additional tools required once adapters are fitted to saws.
- For most bi-metal hole saw brands
- For hole saw sizes between 14-152mm
- Quick & easy interchange between sizes
- No additional tool required once adapt. are fitted to saws.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R158,00
Tork Craft Screw Extractor Set — 2-Piece No.6 (with Left-Hand Drill Bit)
Packaging: Carded (for retail display)
This two-piece kit from Tork Craft includes a left-hand drill bit and a No.6 spiral extractor designed for large fasteners. Drill the left-hand pilot to free the seized or broken fastener, then engage the extractor to remove it safely and cleanly. Ideal for maintenance and fabrication where studs or bolts have snapped and need extraction without damaging the thread.
-
R158,00
AirCraft Reducer Brass 3/4" x 1/4" M/F Conical (SB1234P (1 Piece Packaged))
At a Glance: 3/4" to 1/4" male/female conical brass reducer for stepping between air-line connections
Big line, small connection? Happens all the time in real-world air setups. The AirCraft SB1234P (1 Piece Packaged) conical brass reducer is the clean, no-fuss fix for
stepping from a 3/4" connection down to 1/4" using a male/female (M/F) configuration. It’s ideal for compressors, regulators, filters,
manifolds, spray equipment and general pneumatic plumbing—especially when you want a compact adaptor rather than a messy stack of fittings. Made from
brass for durability and corrosion resistance, this reducer helps keep your compressed-air system tidy, dependable and easy to service.
AirCraft Brass Fittings – Strong Connections For Serious Air Systems
AirCraft brass fittings are built for reliable compressed-air connections where sealing and long service life matter.
This conical reducer bridges sizes neatly, keeping your airline layout clean and workshop-ready.
