Showing 2849–2864 of 4680 resultsSorted by latest
-
R158,00
Size: 20 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R158,00
Size: SQ2
Length: 25mm
Torque limit (Nm): 8.5
A Square Recess Impact Insert Bit, also known as a Robertson Impact Insert Bit, is a specialized tool designed for
use with impact drivers to drive and remove screws with a square-shaped head. It’s crafted from high-quality
materials and features a unique design that enhances its durability and performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R158,00
Size: PZ2
Length: 25mm
Torque limit (Nm): 14
A Pozi Impact Insert Bit is a specialized tool designed for use with impact drivers to drive and remove
Pozi-drive screws. It’s crafted from high-quality materials and features a unique design that enhances its
durability and performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R158,00
Size: PH2
Length: 25mm
Torque limit: 14Nm
A Phillips impact insert bit is a specialized tool designed for use with impact drivers to drive and remove
Phillips-head screws. It’s crafted from high-quality materials and features a unique design that enhances its
durability and performance in demanding applications.
Application:
- For driving screws when using an impact driver or in high torque applications.
- Construction
- Manufacturing
- DIY
-
R158,00
AirCraft Metal PU Fitting T-Joint 10mm x 1/2′ Male (SG MPT10-04)
At a Glance; 10mm push-in T fitting with a 1/2" male threaded branch for clean air line splitting.
The AirCraft SG MPT10-04 Metal PU Fitting T-Joint is a compact, workshop-ready solution for branching a 10mm pneumatic line into a larger 1/2" threaded port. It connects two 10mm pneumatic/PU tubes in-line and provides a 1/2" male threaded outlet for a secondary connection—ideal for manifolds, valves, regulators, distribution blocks or auxiliary air lines. Built from durable metal with quick push-in tube ports, this T joint keeps your compressed-air system neat, serviceable and reliably sealed.
Branch your 10mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a larger threaded port for accessories or branch connections.
-
R157,00
Tork Craft Impact Socket — 18 mm, ½″ Drive, 6-Point Deep (Model TCIM21018)
The Tork Craft TCIM21018 impact-rated deep socket is built for demanding tasks. Featuring a 18 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
-
R157,00
AirCraft O-ring Set For SG A800 (SG A800-01)
At a Glance: Replacement O-ring set for SG A800—refreshes seals to help stop leaks and keep performance consistent.
O-rings are the tiny seals that quietly keep everything working… until they don’t. The AirCraft SG A800-01 O-ring Set is designed for the SG A800 and replaces worn, flattened or cracked seals that can cause air leaks, inconsistent operation and general “why is this thing behaving like that?†moments. Whether you’re doing preventative maintenance or fixing a leak, this O-ring set helps restore airtight performance, improves reliability and keeps your SG A800 running smoothly.
Seal Refresh Reliability: the O-ring set that helps your SG A800 run tight and consistent
Over time, heat, friction and cleaning chemicals can harden or damage O-rings. Replacing them helps re-establish proper sealing, reduces pressure loss and improves consistent operation across the tool/system.
-
R157,00
AirCraft O-ring Kit For SG-A137 (SG-A137-01)
At a Glance: Complete O-ring replacement kit for AirCraft SG-A137 spray gun sealing points
A spray gun depends on tight sealing to keep pressure stable and paint flowing where it should. The AirCraft SG-A137-01 O-ring Kit is a practical service solution
for refreshing worn seals on your SG-A137 spray gun, helping prevent air leaks, paint seepage and inconsistent spray performance. Whether you’re doing preventative
maintenance or fixing a troublesome leak, this kit helps restore smooth operation and reliable results.
Dedicated seal service kit for the SG-A137 spray gun
O-rings are small parts with a big job—keeping joints sealed, controls moving smoothly and pressure behaving properly. Replacing tired O-rings is one of the
simplest ways to improve reliability, especially on spray guns that are used often or cleaned regularly with solvents.
-
R157,00
Drill bits in the set:
- Ø2.0mm
- Ø3.0mm
- Ø4.0mm
- Ø5.0mm
- Ø6.0mm
- ø8.0mm
Application:
The drill bits are made from HSS (hi-speed steel) in a bright finish. The drill bits are fully precision ground at 135°
with a split point. The drill bits can also be used to drill either wood
or metal.
Sharpening:
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
TIP:
When drilling hard metals, always use a coolant/lubricant. We recommend using CT-90.
-
R157,00
AirCraft PU Hose Fitting Valve 8mm x 1/4" Male Thread (SG HVSF02-08)
At a Glance: Inline adjustable flow control valve with 8mm push-in tube fitting and 1/4" male thread connection.
The AirCraft SG HVSF02-08 PU hose fitting valve is a compact, reliable way to control airflow in your pneumatic setup.
With an 8mm push-in tube connection and a 1/4" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and pneumatic circuits where smooth response and repeatable control are important.
Adjust the knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Inline flow control for smoother pneumatic performance
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially handy for controlling actuator speed, softening tool response, or stabilising air delivery in a line.
The flow direction marking helps you install it correctly for consistent control.
-
R157,00
Diameter: Ø20.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R157,00
Tork Core Craft Socket — 30 mm (½″ Drive), CR-V Steel, Deep Length, 12-Point (Model TC66030)
Display Packaging: Single socket carded
The Tork Craft 30 mm deep socket (½″ drive) is manufactured from chromium-vanadium alloy steel, offering strength and precise engagement with a 12-point internal profile. Designed for recessed or hard-to-reach fasteners where standard sockets fall short. Suitable for mechanical, maintenance, and tool-kit applications.
-
R156,00
AirCraft PU Hose Fitting Valve 6mm x 1/8" Male Thread (SG HVSF01-06)
At a Glance: Inline adjustable flow control valve with 6mm push-in tube fitting and 1/8" male thread connection.
The AirCraft SG HVSF01-06 PU hose fitting valve is a compact, practical way to fine-tune airflow in your pneumatic setup.
Designed with a 6mm push-in tube connection and a 1/8" male thread, it installs quickly and gives you easy, repeatable control of air flow to cylinders, tools, blow guns and other air-driven accessories.
Turn the adjustment knob to dial in the flow rate, reduce sudden surges, and get smoother, more controlled operation where it counts.
Simple airflow control for cleaner pneumatic performance
This fitting-style valve works as an inline flow controller, letting you restrict or adjust air flow with a quick twist.
It’s especially useful when you want to slow an actuator, reduce aggressive tool response, or stabilise air delivery.
The flow direction indicator helps you install it correctly for predictable results.
-
R156,00
Size: 60 mm
Application:
Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials.
Bi-metal refers to an object that is composed of two separate metals joined together. Instead of being a mixture of two or more metals, like alloys, bimetallic objects consist of layers of different metals.
- Ideal for cutting stainless steel, mild steel, iron, aluminium, pvc &
wood
- Improved chip clearance
- Cobalt steel
- Alternating tooth patten
- Material release slots to clear material efficiently
- Ultra thin kerf for accurate cuts
- 38mm cut depth for all sizes
- Use mandrel, TC17002, TC17003, TC17007
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R155,00
AirCraft Metal Flow Control 8mm x 1/4" Male Thread (SG MSC08-02)
At a Glance: Precision metal flow control valve with 8mm push-in tube port and 1/4" male thread—dial in stable airflow and smoother pneumatic motion.
If your pneumatic system needs controlled airflow instead of full-volume chaos, the AirCraft SG MSC08-02 Metal Flow Control is the small part that makes a big difference.
It connects 8mm PU tubing via a push-in port to a 1/4" male threaded connection, giving you adjustable airflow for better cylinder speed control, smoother movement, and more predictable compressed air performance.
Durable metal construction and an easy-to-adjust design make it ideal for workshop and machine pneumatics where reliability matters.
Standout feature: Fine airflow adjustment for consistent pneumatic speed control
Tune airflow precisely to reduce jolts, improve repeatability, and keep actuators and air circuits running smoothly under working pressure.
-
R155,00
AirCraft Metal Flow Control 8mm x 1/8" Male Thread (SG MSC08-01)
At a Glance: Precision metal flow control valve with 8mm push-in tube port and 1/8" male thread—dial in smooth airflow and consistent pneumatic motion.
When you need a pneumatic line that behaves with calm precision, the AirCraft SG MSC08-01 Metal Flow Control is your fine-adjustment friend.
It connects 8mm PU tubing via a push-in port to a 1/8" male threaded connection, letting you tune airflow for smoother actuator movement, controlled air delivery, and more stable compressed air performance.
It’s compact, durable, and built for real workshop conditions—because “close enough†is how air systems get noisy.
Standout feature: Accurate airflow adjustment for stable speed control
Restrict airflow in controlled steps to reduce jolts, improve repeatability, and keep cylinders and air circuits running smoothly and predictably.
