Showing 3105–3120 of 4681 resultsSorted by latest
-
R122,00
Size: 50 mm
Grit: #60
Qty: 10
Application:
Sanding and surface conditioning discs are good for removal of metal burs,
paint, rust and finishing applications. Worls well on Die-grinders and
electric drills.
- Quick change replacement screw type sanding disc.
- Surface conditioning 60 grit.
- Use with screw type back pad TCFA02010
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
NOTE: Use with screw type backing pad TCFA02010.
-
R121,00
Drill Bit Diameter: Ø5.0mm
Tap Dimensions: M6 x 1.0mm
This set is typically used in metalworking applications, such as creating holes for screws or bolts in metal plates
or sheets. The drill bit is used to create a pilot hole of the appropriate size, and then the tap is used to cut the
threads into the hole.
The tap in this set is an HSS tap, which means it is made of high-speed steel. HSS is a type of steel that is very
hard and tough, making it ideal for tapping. The tap has a diameter of 6mm and a pitch of 1.0mm. The pitch is the
distance between the threads.
The drill bit in this set is a 5.0mm drill bit. This means that it has a diameter of 5.0mm. The drill bit is used to
create a pilot hole that is slightly smaller than the diameter of the tap. This pilot hole helps to guide the tap
and prevent it from binding.
Application:
- For cutting internal threads
- Construction
- Manufacturing
- DIY
-
R121,00
Tork Craft Taper Adapter — MT2 to JT4 (Morse → Jacobs)
Adapt MT2 (Morse Taper #2) spindles/arbors to accept JT4 (Jacobs Taper #4) drill chucks. This hardened, precision-ground adapter ensures concentric seating for smooth, accurate drilling on drill presses, lathe tailstocks and milling machines (drill mode).
-
R121,00
Tork Craft Bent Nose Plier — 160 mm
This 160 mm bent-nose plier from Tork Craft features angled jaws designed for access in tight or awkward spaces, allowing you to grasp, bend or manipulate wire, components or assemblies with precision. The bent geometry gives better clearance around panels and brackets, making it ideal for mechanical, electrical and general workshop applications.
Application:
- Bending and cutting metal wire and electrical cable.
- Working with wire mesh, perimeter fences, and site barriers.
- Gripping, twisting, and holding wire.
- Long jaws to reach difficult places.
- 45° Bent Jaws for hard to reach places.
- Plumbing
- Construction
- Automotive
- DIY
-
R121,00
Works with Kit NR5010
Thread length: 20 mm
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R121,00
Tork Craft Polisher Service Kit Gear Box Housing & Screws (13/14) For POL06
At a Glance: Genuine gearbox housing and screws kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit gear box housing & screws (Cat No. POL06-SK02) is a genuine spare designed specifically for the Tork Craft POL06 polisher.
The gearbox housing forms the front section of the tool, enclosing the gears and supporting the spindle, while the matching screws clamp everything securely in place.
When the original housing is cracked, stripped or badly worn, it can lead to misalignment, grease leaks and increased vibration. Replacing it with this original
POL06-SK02 kit restores a solid, correctly shaped casing so your polisher can run smoother, safer and more reliably.
Standout feature: Factory-shaped gearbox housing with matching screws for POL06
Supplied as an original Tork Craft service kit, the housing and screws are moulded and machined to match the POL06 body and gearbox layout,
ensuring proper fit with internal gears, bearings and spindle, as well as a neat join to the main motor housing.
-
R121,00
Tork Craft Polisher Service Kit Gear Box Housing And Screws (14, 20) For POL05
At a Glance; Genuine gear box housing and screws kit (items 14 and 20) for the Tork Craft POL05 polisher.
Give the business end of your Tork Craft POL05 a new lease on life with this dedicated gear box housing and screws service kit.
The gear head housing is the protective shell around the main drive gears – it keeps the lubrication in, the dust out and holds the bearings and gears in correct alignment while you cut, polish and finish.
After years in a panel shop or detailing bay, the original housing can be knocked, cracked, stripped or distorted, and the screws can lose their bite.
The POL05-SK02 kit replaces the gear box housing and its fastening screws (items 14 and 20 on the parts diagram) so you can rebuild the head of the tool to factory-tight, solid condition.
-
R121,00
Pattern: Standard
Density: Firm
Colour: Orange
Diameter: Ø150mm
Thread/Hook & Loop: M14
Application:
The compounding sponge should be used with an automotive polisher.
It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
Compounding sponge uses:
| COLOUR |
POLISH |
COMPOUND |
| White |
Good |
Best |
| Orange |
Good |
Best |
| Red |
Best |
|
| Black |
Best |
|
Compounding sponge range:
| ORDER NO. |
DENSITY |
COLOUR |
DIAMETER |
THREAD |
PATTERN |
|
SPC00101 |
Firm |
Orange |
ø200mm |
Hook & Loop |
Standard |
|
SPC00100 |
Soft |
Yellow |
ø200mm |
Hook & Loop |
Standard |
|
SPC00102 |
Soft |
Red |
ø200mm |
Hook & Loop |
Standard |
|
TCCS15058 |
Firm |
White |
ø150mm |
5/8 UNC |
Standard |
|
TCCS15014-1 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014-4 |
Firm |
White |
ø150mm |
M14 |
Standard |
|
TCCS15014 |
Firm |
Orange |
ø150mm |
M14 |
Standard |
|
TCC15014-2 |
Soft |
Red |
ø150mm |
M14 |
Standard |
|
TCCS15014-3 |
Soft |
Black |
ø150mm |
M14 |
Standard |
|
TCCS15014-5 |
Soft |
Black |
ø150mm |
M14 |
Waffle |
|
SPC00124 |
Firm |
Blue |
ø125mm |
Hook & Loop |
Standard |
NOTE:
For the ø200mm Hook & Loop compounding sponges, use the M14 backing pad
SPC00106.
Adaptors to convert or lenghten the polisher’s thread:
-
R120,00
The FIXMAN T-Bar Socket Wrench is made of C45 Carbon Steel
(+ Cr-V 50BV30) and finished in satin chrome plating. Socket part made from
duyrable Chrome Vanadium for strength and durability.
-
R120,00
AirCraft Brad Nails — 18 Gauge × 38 mm (Box of 5 000)
Deliver a clean, subtle finish on interior woodwork. These 18-gauge, 38 mm brads drive flush with a tiny head that’s easy to fill, making them ideal for skirtings, architraves, beading, cabinet assembly and light mouldings. Supplied in a contractor-friendly 5 000-piece box and optimised for the AirCraft AT0001 (and most straight-magazine 18 g nailers).
-
R120,00
Blister: Qty 6
Application:
The TorkCraft Ball Point Keys for easy & angeled entry, blades are made of
CrV, keys flip open & close for easy storage.
Sizes Included:
- 6 x Torx Security Keys
- 1 x 2 mm
- 1 x 2.5 mm
- 1 x 3 mm
- 1 x 4 mm
- 1 x 5 mm
- 1 x 6 mm
- 1 x 45 mm Carabiner belt clip
-
R120,00
Pull Force: 22.7kg
Weight: 563g
Angles: 45°, 90° & 135°
A magnetic multi-angle welding holder is a specialized tool designed to securely hold workpieces at various angles during welding, soldering, or assembly tasks. It’s a valuable asset for fabricators, metalworkers, and hobbyists alike.
Application:
- Used in welding, soldering, assembly, marking-off, pipe installations and demagnetizing.
- Can be used as a floater to separate steel plates, 0.3mm (maximum thickness)
- Manufacturing
- DIY
-
R120,00
Thread length: 24 mm
Qty: 5 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R120,00
Hole saw diameter:
ø22mm
Use mandrel:
TC17002-2
Application:
The hole saw’s cup design is manufactured from a special alloy steel and the
cutting edges are Tungsten Carbide gritted. It is specially designed to drill
into abrasive materials.
The hole saw can be used to cut into:
- Fiberglass
- Kevlar
- Asbestos
- Graphite
- Carbon
- Brick
- Tiles
- Plaster slabs
- Walls
- Light stones
- Weatherboard
IMPORTANT:
Do not use with hammer/percussion action or to drill into concrete.
-
R120,00
AirCraft Metal PU Fitting Y-Joint 8mm (SG MPY08)
At a Glance: Metal push-in Y-joint for 8mm PU pneumatic tubing—split one line into two in seconds.
When you need a neat branch in a pneumatic line (without a tangle of extra couplers), the AirCraft SG MPY08 Metal PU Fitting Y-Joint is the simple fix.
Designed for 8mm PU tubing, this push-in style connector lets you split or combine airflow quickly for compact tool setups, control circuits, or tidy workshop air routing.
The metal body gives you the confidence to build cleaner, more durable air lines where plastic fittings can feel a bit… optimistic.
Standout feature: Robust metal push-in design for clean 8mm line branching
A compact Y configuration that helps reduce clutter, speed up installs, and keep your pneumatic layout looking professional—because good airflow deserves good manners.
-
R120,00
AirCraft Metal PU Fitting Elbow 12mm x 1/2′ Male (SG MPL12-04)
At a Glance; Compact 90° elbow with 12mm push-in tube connection and 1/2" male thread.
The AirCraft SG MPL12-04 Metal PU Fitting Elbow is built for pneumatic systems where a 12mm line needs a clean corner turn into a larger 1/2" threaded port. It connects 12mm pneumatic/PU tubing to a 1/2" male threaded outlet, giving you a neat 90° route where space is tight and routing needs to stay organised. With durable metal construction and a secure push-in tube connection, it’s a reliable choice for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where dependable sealing matters.
Strong 90° AirCraft metal push-in elbow fitting for 12mm tube
A workshop-ready elbow connector that keeps routing tidy while providing a robust threaded connection to larger pneumatic ports.
