Showing 3169–3184 of 4681 resultsSorted by latest
-
R116,00
<!--
Jaw Width: 75mm
Maximum Jaw Opening: 65mm
-->
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
- Bit produces accurate plugs from any type of wood.
- Precision-ground cutters for precise fitting.
- 1/4" Shank size fits most standard chucks.
- Use to cut straight/parallel plugs.
- Chamfered blade tips for easy start.
Benefits of using plug cutters:
- Conceal screw heads
- Using the same wood to cut plugs provides a perfect colour match.
- Wood grains can be alligned for a professional finish
- Offcut wood can be used effectively
Application:
- DIY
- Contracting
- Woodworking
TIP: Keep the grain of the plug in line with the workpiece for a professional finish.
-
R116,00
Daimeter: Ø25.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
Standard
vs. Pro series:
Notice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R115,00
FIXMAN 1/2′ DR.14 X 100MM HEX ALLEN BIT SOCKET H14
-
R115,00
The FIXMAN T-Bar Socket Wrench is made of C45 Carbon Steel
(+ Cr-V 50BV30) and finished in satin chrome plating. Socket part made from
duyrable Chrome Vanadium for strength and durability.
-
R115,00
AirCraft Brad Nails — 16 Gauge × 38 mm (Box of 2 500)
When the job needs more bite, these 16-gauge, 38 mm brads deliver strong holding power with a neat finish. The heavier shank grips well in thicker trims, casings and cabinet assemblies, while the small head keeps surface repairs minimal. Supplied in a contractor-friendly 2 500-count box and compatible with the AirCraft AT0002 and most straight-strip 16 g brad nailers.
-
R115,00
AirCraft Flow Control Swivel Elbow PU 10mm x 3/8" M (SG ASC10-03)
At a Glance: Adjustable flow control elbow: 10 mm push-in tube to 3/8" male thread
The AirCraft SG ASC10-03 Flow Control Swivel Elbow PU 10mm x 3/8" M is a compact, point-of-use fitting that combines neat 90° tube routing with built-in airflow adjustment. It features a 10 mm push-to-connect tube port, a 3/8" male threaded connection, and an adjustable flow control screw that lets you fine-tune airflow right at the connection point. Ideal for pneumatic systems where you want smoother actuator movement, controlled airflow to equipment, and a clean installation without adding separate inline valves.
Compact Swivel Elbow With Built-In Flow Control
The SG ASC10-03 allows precise airflow tuning to reduce harsh movement and improve control. The swivel elbow design makes alignment easy during installation, keeping tube runs tidy and reducing hose strain for a cleaner pneumatic layout.
-
R115,00
Tork Craft 6-Piece Screwdriver Set — Black Handle (Model KT2551)
A practical 6-piece screwdriver set for everyday maintenance, DIY and workshop tasks. The kit combines three slotted and three Phillips sizes with durable black plastic handles for reliable grip and control.
-
R115,00
<!--
Stages: Sinter, Fine & Carbon
-->
A sabre saw scraper is a specialized blade designed for a reciprocating saw (also known as a sabre saw). Unlike
traditional saw blades that cut through materials, a scraper blade is designed to remove material by scraping or
planing.
Application:
- Removal of glue, vinyl, linoleum, novilon, drywall mud, carpets, wallpaper and paint.
- Contractor
- DIY
-
R115,00
Total width: 80mm
Profile: Delta
Classification: Standard (Yellow)
<!-- 
-->
The Quick Change Base & Arbor 80mm Delta Felt Polishing Pad is a highly specialized accessory designed for efficient
and thorough polishing across large, angular, or difficult-to-reach flat surfaces. The core of this system is an
80mm delta-shaped felt pad, which utilizes high-density felt material for effective application of polishes and
compounds. This triangular ‘delta’ shape allows the user to easily access corners, tight edges, and complex contours
that conventional round pads cannot manage.
A key efficiency feature of this tool is the integrated Quick Change Base & Arbor. This mechanism enables operators
to rapidly and securely swap the felt pad without the need for additional tools. By drastically minimizing the
changeover time, the system ensures maximum productivity, making it an ideal choice for multi-stage polishing jobs
or professional applications where speed and consistency are paramount.
The combination of the large 80mm size with the delta tip geometry ensures that users can cover a significant
surface area quickly while maintaining precision into corners. This makes the pad particularly valuable in
restoration work, automotive detailing (such as dashboard or pillar trim), and woodworking, where a professional,
high-gloss finish is required on complex, non-linear surfaces.
Application:
- For fine polishing on flat surfaces
-
R115,00
Tork Craft Precision-Max Step Point Drill — 8.0 mm HSS (1 Piece)
This 8.0 mm high-speed steel (HSS) precision drill bit features a step-point tip for superior centering and cleaner entries. With a tri-flat shank and split point design, it resists walking and delivers accurate holes in steel, aluminium, plastics and sheet work.
-
R115,00
Tork Craft Shifting Spanner 6" 150mm 0-19.2mm Adjustable Wrench (TC52006)
At a Glance: Durable 6" (150mm) shifting spanner with 0–19.2mm jaw opening, full-body hardened and made from Chrome Vanadium steel.
When you want one spanner that can cover a spread of sizes without hauling a whole set, a good shifting spanner is the move. The Tork Craft TC52006 Shifting Spanner is a practical 6" (150mm) adjustable wrench designed for confident everyday use in the workshop, garage and on the go. With a full-body hardened build, an extra-wide design for improved grip comfort, and a hardened screw and jaw, it delivers stable adjustment and a reliable bite on nuts and bolts—exactly what you need when time is short and the fastener isn’t feeling cooperative.
Full-Body Hardened Chrome Vanadium Shifting Spanner For Versatile Fastening
Built for general maintenance and mechanical work, this compact-but-capable adjustable wrench is ideal for plumbing fittings, light automotive tasks, machinery adjustments, bicycle maintenance and everyday repairs where fastener sizes vary.
-
R114,00
Tork Craft Non-Woven Industrial Strength Pads — 150 × 230 mm, Ultra-Fine Grey (5-Pack)
Get silky, uniform scuff-sanding without loading or gouging. Tork Craft Ultra-Fine Grey pads use a tough, open non-woven web that contours to profiles, feathers edges and de-nibs between coats with ease. At 150 × 230 mm and supplied in a 5-pack, they’re the shop staple for paint prep, finishing and gentle cleaning on wood, metal and composites—wet or dry.
-
R114,00
AirCraft PU Hose Fitting Y Joint 14mm x 1/4" M BSP (SPX14-02)
At a Glance: Y-branch fitting with two 14mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX14-02 PU Hose Fitting Y Joint 14mm x 1/4" M BSP is a compact, dependable way to branch a single threaded air port into two 14mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or distribution runs—without stacking adaptors and cluttering your layout. With push-in convenience on the 14mm ports and a reliable 1/4" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Push your 14mm hoses in to lock, then screw into a 1/4" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R114,00
AirCraft Insert Manifold Side 4-Port PU 10mm (SG APKJ10)
At a Glance: 4-Port Side Insert Manifold with 10mm Push-In Tube Connections
Build a clean, compact pneumatic layout with the AirCraft SG APKJ10 insert manifold. Designed as a side-entry distribution fitting, it gives you four quick push-in ports for 10mm pneumatic tubing—perfect for splitting a single air supply into multiple lines for valves, actuators and air-assisted stations. Neat routing, quick assembly, and fewer fittings to wrestle with, especially on bigger air lines.
Compact 4-Port Distribution for 10mm Pneumatic Tubing
This side insert manifold is ideal where space is tight and you want multiple outlets in one tidy body. Push-in connections make it quick to assemble and easy to service when you need to change or reroute tube runs in compressed-air systems.
-
R114,00
Tork Craft Impact Extension Bar — 2″ × 1/2″ Drive
Extension Size: 2″ (50 mm) Length — 1/2″ (12.7 mm) Drive
This compact 2″ impact extension bar from Tork Craft is engineered for tough fastening jobs where sockets need just a bit more reach.
Designed for 1/2″ drive impact wrenches and ratchets, it delivers excellent strength, shock resistance and reliability, even under
high torque loads. Ideal for automotive technicians, mechanics, industrial fitters and anyone working in tight spaces where a standard
socket won’t quite reach.
-
R114,00
Size : 20MM
Application:
The Tork Craft Offset combination spanners features an anti-slip design open
ended and closed ring profile, it has an offset angle for usage in confined
spaces, for automotive, DIY, construction & manufacturing
- Anti-slip design
- Open ended and closed ring profile
- Offset angle for usage in confined spaces
