Showing 3185–3200 of 4681 resultsSorted by latest
-
R114,00
Diameter: 18 mm
Length: 170 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R114,00
AirCraft Flow Control Swivel Elbow PU 8mm x 3/8" M (SG ASC08-03)
At a Glance: Adjustable flow control elbow: 8 mm push-in tube to 3/8" male thread
The AirCraft SG ASC08-03 Flow Control Swivel Elbow PU 8mm x 3/8" M is a compact fitting that does two jobs at once: it routes an 8 mm pneumatic line at 90° and lets you fine-tune airflow right at the connection point. With an 8 mm push-to-connect tube port, a 3/8" male threaded connection, and an adjustable flow control screw, it’s ideal for pneumatic systems where you need smoother actuator movement, controlled air supply to equipment, and a clean installation without the clutter of separate inline valves.
Neat 90° Routing With Point-of-Use Airflow Control
The SG ASC08-03 allows precise airflow tuning to help reduce harsh movement and improve control. The swivel elbow design makes alignment easy during installation, keeping tube runs tidy and reducing hose strain.
-
R114,00
Works with Kit NR5010
Thread length: 10 mm
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R114,00
AirCraft Brass Conical Straight 1/2" Tube x 1/2" M (SB6808D)
At a Glance: Conical tube-to-thread straight fitting: 1/2" tube to 1/2" male connection
When you want a clean, direct connection from 1/2" pneumatic tubing into a matching 1/2" threaded port, this fitting keeps things simple,
strong and leak-conscious. The AirCraft SB6808D brass conical straight fitting adapts 1/2" tubing to a 1/2" male thread in a straight-through
layout—ideal for workshop air circuits, manifolds, machinery pneumatics and general compressed-air plumbing where a compact, serviceable join matters.
Brass construction delivers durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing
when installed correctly.
AirCraft Brass Conical Tube Fittings – Big Tube, Clean Port Connections
AirCraft tube fittings are built for practical pneumatic layouts where sealing and serviceability matter.
This straight connector gives you a tidy 1/2" tube to 1/2" port connection with minimal bulk and a solid, workshop-ready finish.
-
R113,00
AirCraft PU Hose Fitting Tee 10mm x 1/2" F x 1/2" M (SG-APHF10-04)
At a Glance: 10mm Push-In Tube Port with 1/2" Female Thread x 1/2" Male Thread Tee
When you’re working with larger pneumatic ports and still want a tidy, compact take-off point, the AirCraft SG-APHF10-04 PU hose fitting tee is built for the job. This tee combines a quick push-in port for 10mm tubing with a 1/2" female thread and a 1/2" male thread—ideal for adapting, branching or re-routing compressed-air connections on air prep equipment, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Heavy-Duty Pneumatic Connections
With both male and female 1/2" threaded ends plus a 10mm push-in tube port, this fitting helps keep installations clean and service-friendly, especially where space is limited and reliable connections matter.
-
R113,00
Tork Craft Impact Socket Adaptor Set — 3 pc (1/4′, 3/8′, 1/2′) (Model TCIAD143812)
The Tork Craft TCIAD143812 3-piece impact socket adaptor set allows quick conversion from a drill or impact driver to a socket driver. Each adaptor is made from premium chrome vanadium steel with a black oxide coating for corrosion resistance and superior torque transfer. Perfect for driving sockets using cordless drills, impact wrenches, or ratchet tools.
-
R113,00
AirCraft Metal Swivel Elbow 10mm x 1/4′ Male (SG MPH10-02)
At a Glance; 10mm push-in tube connection to 1/4" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH10-02 Metal Swivel Elbow is a solid choice when a 10mm pneumatic line needs to turn neatly into a common 1/4" port. It connects 10mm tubing to a 1/4" male threaded outlet and features a swivel body so you can align the elbow after tightening—helping prevent twisted tubing and reducing strain that can cause leaks. With durable metal construction, it’s ideal for workshop compressed-air systems, regulators, manifolds, valves, cylinders and pneumatic control equipment where tidy routing and dependable sealing are essential.
Compact, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector that routes 10mm tubing cleanly and allows precise alignment for a professional pneumatic layout.
-
R113,00
Tork Craft Blade TCT 170 × 24 T — General Purpose Rip
Size: 170 mm diameter × 24 teeth [Bore: 20/16 mm]
This 170 mm Tork Craft TCT saw blade with 24 carbide-tipped teeth is built for general-purpose ripping and straightforward wood-cutting tasks. Paired with dual bore compatibility (20 mm / 16 mm), it fits a range of saws and offers dependable performance in site or workshop use.
-
R112,00
AirCraft Flow Control Swivel Elbow PU 6mm x 3/8" M (SG ASC06-03)
At a Glance: Adjustable flow control elbow: 6 mm push-in tube to 3/8" male thread
The AirCraft SG ASC06-03 Flow Control Swivel Elbow PU 6mm x 3/8" M is a compact, practical way to route a 6 mm pneumatic line at 90° while also controlling airflow at the point of connection. With a 6 mm push-to-connect tube port, a 3/8" male threaded connection, and an adjustable flow control screw, it’s ideal for pneumatic systems where you want smoother actuator movement, controlled air supply to equipment, and a neat installation without the extra bulk of an inline valve.
Neat Elbow Routing With Built-In Airflow Control
The SG ASC06-03 lets you dial in airflow right where it matters, helping you tune speed and response. The swivel elbow body makes alignment easier during installation, keeping tubing runs tidy and reducing hose strain.
-
R112,00
Diameter: Ø14.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R112,00
Hole saw diameter:
ø46mm
Use mandrel:
TC17007
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R112,00
Included
in the set:
- (x6) Carpenter pencils
- (x1) Pencil sharpener
Application:
Carpenter pencils are easier to grip than standard pencils, because they have a
larger surface area. The non-round core allows thick or thin lines to be drawn
by rotating the pencil. Thin lines are required for precision markings and thick
markings are needed to mark on rough surfaces.
The pencils are robust to survive in a construction environment. Carpenter
pencils are also used by builders, because it is also suitable for marking on
rough surfaces, such as stone or concrete.
The set includes a pencil sharpener specifically designed for carpenter pencils
to give a clean sharp point. The sharpener is safer and easier to use compared
to a utility knife.
Pencil length: 175mm
TIP:
Notching the middle of the lead with the corner of a file makes it possible to
draw two parallel lines at once. The parallel lines might resemble the kerf of a
saw blade
-
R112,00
Tork Craft Cold Chisel Set 3-Piece
Heading: Three sizes included – heavy-duty cold chisels for metal-working, fabrication and cutting tasks
The Tork Craft TCPU20207 cold chisel set includes three durable chisels designed for shaping, cutting or removing metal workpieces. Each tool is forged for strength and finished for industrial workshop use, making it a dependable addition to your metal-working toolkit.
Ideal for workshop use, fabrication, maintenance and repair tasks, the set covers a range of sizes so you’re prepared for different scale jobs—from narrow slotting to broader metal removal. The heavy-duty construction ensures the tools stand up to repeated impact and tough job-site conditions.
-
R112,00
Diameter: Ø22.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R112,00
Diameter: Ø19.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R112,00
Tork Craft Wood Chisel — 32 mm Blade
A wide, assertive chisel for larger flattening and trimming tasks. The 32 mm blade gives you solid control while you remove material efficiently — great for cleaning rebates, smoothing panels, and adjusting large surfaces in joinery or carpentry settings.
