Showing 3377–3392 of 4681 resultsSorted by latest
-
R94,95
Length Closed: 80mm
Length Opened: 120mm
Hex Shank: 1/4" M (6.35mm)
Hex Drive: 1/4" F (6.35mm)
The bit holder is used with all 25mm hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in
place.
The outer self-retracting sleeve easily and quickly holds and guides the screw straight into the timber and assists
in eliminating slippage.
Application:
- Screw guides in a horizontal or in a vertical orientation.
- Support fasteners
- Construction
- Electrical
- Automotive
- Contractor
- Carpenters
- DIY
-
R94,95
Length Closed: 80mm
Length Opened: 120mm
Hex Shank: 1/4" M (6.35mm)
Hex Drive: 1/4" F (6.35mm)
The bit holder is used with all 25mm hex shank 6.35mm bits. The bit holder features a magnet to keep the bit in
place.
The outer self-retracting sleeve easily and quickly holds and guides the screw straight into the timber and assists
in eliminating slippage.
Application:
- Screw guides in a horizontal or in a vertical orientation.
- Support fasteners
- Construction
- Electrical
- Automotive
- Contractor
- Carpenters
- DIY
-
R95,00
AirCraft Swivel Elbow PU 10mm x 1/2" Male (SG-APH10-04)
At a Glance: 10mm Push-In Tube x 1/2" Male Thread Swivel Elbow
When you need a bigger threaded connection without sacrificing neat hose routing, the AirCraft SG-APH10-04 swivel elbow fitting delivers. This one-touch push-in connector links 10mm PU tubing to a 1/2" male threaded port, while the swivel elbow action helps the tube align naturally—reducing twisting, kinks and strain for a tidy, reliable pneumatic installation that’s easy to service.
Swivel Elbow Control for Larger Pneumatic Ports
The 90° swivel design allows the tube to rotate for easier positioning during installation and maintenance. Ideal for compressed-air systems, air preparation units, manifolds and industrial pneumatic equipment where 1/2" ports are used and space is limited.
-
R95,00
For use with bench grinders to grind all types of steel.
DIAMETER: ø125mm
WIDTH: 20mm
BORE: Ø32mm
GRIT: 60
ABRASIVE: Aluminium oxide
MAX RPM: 5300
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R95,00
For use with bench grinders to grind all types of steel.
DIAMETER: ø125mm
WIDTH: 20mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 5300
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R95,00
AirCraft Elbow With O-ring 14mm – 1/2" M BSP PU Hose Fitting
At a Glance: 14mm push-in tube connection to 1/2" Male BSP thread with an O-ring seal in a compact 90° elbow.
Big tube, big port, tidy corner turn—with extra sealing support where it counts. The AirCraft Elbow With O-ring 14mm-1/2" M BSP PU Hose Fitting connects 14mm pneumatic tubing to a 1/2" BSP female port using a fast push-in connection, keeping your air line routing clean and reducing strain on the tube. The integrated O-ring supports sealing at the port face on compatible connections, helping reduce leak risk in higher-flow compressed-air setups on compressors, FRLs, regulators, manifolds and workshop air systems.
Standout feauture or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal
Quick push-in tube connection paired with an O-ring at the thread for a tidy, leak-resistant finish in compact pneumatic installations.
-
R95,00
AirCraft Hosetail 1/4"F x 10mm 2pc Pack (SG13050P)
At a Glance: 10mm hose tail to 1/4" inch Female BSP (F) connection — 2-piece pack
The AirCraft SG13050P Hosetail 2pc Pack is a practical fitting set for connecting a 10mm air hose to a 1/4" inch Female BSP threaded interface.
It’s a tidy solution for compressed-air lines, pneumatic setups and routine maintenance—ideal when you want a secure hose grip, correct thread compatibility and a clean finish.
With two fittings in the pack, it’s perfect for service kits, maintenance drawers and quick turn-around repairs.
Standout feauture or series/quality/range AirCraft Metal Hosetail Convenience Pack
Made for everyday workshop use, this metal hosetail helps create a dependable hose-to-thread transition—ideal for keeping downtime low and air lines running smoothly.
-
R95,00
AirCraft Metal Swivel Elbow 8mm x 1/4′ Male (SG MPH08-02)
At a Glance; 8mm push-in tube connection to 1/4" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH08-02 Metal Swivel Elbow is made for pneumatic installations that need a clean corner turn into a common 1/4" port—without twisting your tubing into submission. It connects 8mm pneumatic tubing to a 1/4" male threaded outlet and features a swivel body so you can align the elbow neatly after tightening. The result is a tidier air line route with less strain on the tube and a better chance of staying leak-free over the long haul. Ideal for compressed-air systems on regulators, manifolds, valves, cylinders and workshop equipment where routing space is limited and reliability matters.
Compact, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector that routes 8mm tubing neatly and allows precise alignment for a professional pneumatic layout.
-
R95,00
AirCraft PU Hose Fitting Tee 6mm x 1/2" F x 1/2" M (SG-APHF06-04)
At a Glance: 6mm Push-In Tube Port with 1/2" Female Thread x 1/2" Male Thread Tee
When you’re working with larger pneumatic ports and still want a tidy, compact take-off point, the AirCraft SG-APHF06-04 PU hose fitting tee is built for the job. This tee combines a quick push-in port for 6mm tubing with a 1/2" female thread and a 1/2" male thread—ideal for adapting, branching or re-routing compressed-air connections on air prep equipment, valves and manifolds without bulky hose runs.
Compact Tee Adapter for Heavy-Duty Pneumatic Connections
With both male and female 1/2" threaded ends plus a 6mm push-in tube port, this fitting helps keep installations clean and service-friendly, especially where space is limited and reliable connections matter.
-
R94,00
Chuck Capacity: 1.5mm to 13mm
A drill chuck with key is a device used to secure drill bits into power drills and other rotary tools. It features
three jaws that grip the drill bit shank when tightened with a separate key. The key is inserted into a slot on the
chuck and rotated to expand or contract the jaws, allowing for secure clamping of the drill bit.
Application:
- Drilling into materials such as wood, steel, plastics and masonry/bricks.
- Construction
- Industrial
- DIY
-
R94,00
Slot-head
size:
5.5mm
Length: 125mm
Application:
The screwdriver is designed to be ergonomic and wear resistant. The tip has
been hardened for optimum durability.
The VDE (Verband der Elektrotechnik) certified screwdriver is insulated to
withstand 1000V and is suitable for work on electrical equipment.
Slot-head sizes available:
Slot-head 3.5 x 75mm –
TC16039
Slot-head 4.0 x 100mm –
TC16040
Slot-head 5.5 x 125mm –
TC16041
Slot-head 6.5 x 150mm –
TC16042
-
R94,00
Thread length: 28 mm
Qty: 5 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R94,00
Shank:
T-shank
Distance between teeth: /
Total length: 83mm
Teeth Per Inch: /
Packaging: Pack of 2
Application:
The jigsaw blade’s length of teeth are cover in a tungsten carbide grit.
The blades are designed to make straight cuts in soft ceramic wall tiles, cast iron
and fiberglass reinforced plastic between 5-10mm in thickness.
Compatibility:
- AEG
- ATLAS-COPCO
- BOSCH
- DEWALT
- ELU
- FESTOOL
- HITACHI
- MAKITA
- METABO
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
-
R93,00
Size: PZ 3
Length: 150 mm
Application:
The
Tork Craft screwdriver is designed to be ergonomic and wear resistant. The tip has been hardened for optimum durability.
The blade is made of CrV (Chrome Vanadium Steel)
- Ergonomic & Wear resistant
- Tip hardened for optimum durability
- Blade made of Chrome Vanadium Steel
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R93,00
Tork Craft Sabre Saw Blade — 240 mm × 5 mm (5 TPI) Wood (2-Pack)
Packaging: Carded (2 blades per pack)
Built for aggressive and fast cuts in wood, this 240 mm long sabre (reciprocating) saw blade from Tork Craft features a 5 mm width and coarse 5 TPI tooth spacing. Ideal for rough structural timber cutting, board ripping and demolition style work.
-
R93,00
Buffing
pad material:
Cotton
Diameter: Ø100mm
Bore: Ø6.0mm
Application:
The buffing pad is
not supplied with a chuck adaptor spindle.
TC335 is an arbor with a ø6.0mm shaft available for the buffing pad.
It is ideal for buffing jewelry and other metals. The concentrically sewn
sections add strength to the buffing pad and it cleans surfaces without damaging
it.
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessible, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occurring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
