Showing 3441–3456 of 4681 resultsSorted by latest
-
R88,00
Application:
This is a regular cleaning compound to be used with a polishing buff to clean
precious
metals:
How to use the compounds and the buffing pads:
- The adaptor is used to hold the buffing pad in the drill’s chuck. Fasten
the correct buffing pad in the adaptor. Make sure the flanges are on both
sides of the buffing pad.
- It would be best to use a drill press to polish metals. If a drill press
is not accessable, use adaptor
TCV01810 with a portable drill with a collar
diameter of Ø43mm. Tighten the adaptor in the drill’s chuck.
- The buffing pad should revolve towards you at full speed. Pass the
compound lightly across the face of the buffing pad. To ensure that the
compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffing pad. This will eliminate lumps of compound from
occuring.
- If desired, heat the item to 65°C using an oven or a heater. Warming
the metal keeps the compound on the buffing pad. A cool item will draw
compound from the pad and leave deposits. Use a glove to handle the warm
item.
- Hold the metal lightly against the buffing pad. Allow the compound to do
the work.
- If more compound is required, apply it using a wiping motion. Do not
overload the buffing pad.
Use Tork Craft’s line of buffing pads and compounds to clean, polish and
bring to a high gloss, all metals and plastics.
| |
HEAVY DUTY CLEANING |
REGULAR CLEANING |
LIGHT POLISHING |
HIGH GLOSS POLISHING |
| Hard metals |
1 |
2 |
5 |
6 |
| Soft metals |
|
3 |
5 |
6 |
| Precious metals |
|
4 |
5 |
6 |
-
R88,00
Diameter: Ø13.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood. The Pro Series range
spade drill bits are equipped with spurs to achieve a faster and cleaner cut
compared to standard spade drill bits.
Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
-
R88,00
Carded Pack: Qty 3
Application:
- For cutting internal threads
- Standard, Pipe & metric sizes
- Produced to exacting specifications
- Rust & Tarnish resistant
- Cut cleaner more accurate threads
- Four flutes for extra chip clearance
- Right handed threaded taps in plug style
What you need to cut internal threads:
- Correct size tap
- Proper drill bit or hole
- Proper lubricant (light weight oil in ferrous metals & Paraffin or
beeswax for cutting alumnium. Do not use oil when cutting cast iron)
- Tap wrench
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R88,00
AirCraft Reducer Brass 1/2×1/2 Male/Female (SB1226P (Packaged))
At a Glance: Brass reducer adaptor with 1/2 x 1/2 male/female threads for larger compressed-air connections.
The AirCraft SB1226P (Packaged) brass reducer is a sturdy adaptor designed to connect pneumatic components using 1/2 x 1/2 threads, with a male/female configuration.
It’s ideal for workshop air distribution, compressor plumbing, manifolds, filters and other higher-flow air system hardware where a reliable threaded connection matters and you want a tidy, service-friendly setup.
Brass construction offers durability and corrosion resistance, helping keep larger air line connections dependable, leak-resistant and easier to maintain over time.
Robust brass adaptor for neat 1/2 pneumatic plumbing
Bigger fittings usually sit in the main air line area, where any leak wastes a lot of air. The SB1226P (Packaged) helps keep 1/2 connections clean and compact, reducing unnecessary joints and helping improve long-term reliability.
-
R88,00
Tork Craft Drill Bit — HSS 8.0 mm 135° Split Point Hex Shank (Industrial)
Professional-grade 8.0 mm high-speed steel (HSS) twist drill bit featuring a 135° split point for accurate, self-starting cuts. The hex shank offers quick-change compatibility for improved workflow. Ideal for metal, plastics, and general workshop tasks where precision and speed matter.
-
R88,00
AirCraft Metal PU Fitting Straight 12mm x 1/2" Female (SG MPCF12-02)
At a Glance: Straight metal push-in fitting for 12mm tube to 1/2" female thread
The AirCraft SG MPCF12-02 Metal PU Fitting Straight is a heavy-duty connector designed for pneumatic installations where you need a quick tube
connection and a larger threaded interface. The push-in end accepts 12mm pneumatic tubing for fast, secure fitment, while the 1/2" female threaded
side connects to compatible male-threaded ports, valves, regulators or manifolds. Ideal for compressor lines and compressed-air plumbing where neat
routing, dependable sealing and easy servicing matter.
Heavy-duty straight connector for clean, reliable air-line systems
Built to simplify installs and maintenance, this straight fitting helps keep tubing runs organised and accessible—perfect for workshop equipment,
pneumatic panels and general compressed-air setups.
-
R87,00
File length (including handle): 160mm
Blade length: 100mm
File diameter: 3.0mm
Steel grit (cut): 2nd cut
<!-- ![Tork Craft Needle File Set 6PC]()
-->
This 6-piece needle file set includes a variety of file shapes for precision work such as jewellery making,
model building, tool sharpening, and general DIY. Each file is manufactured from durable carbon steel,
hardened and tempered for longevity. The ergonomic handle features a plastic and rubber grip for comfort
during extended use. Supplied in a blister pack for easy storage and display.
Application:
- Jewellery making and fine metalwork
- Model building and crafts
- Tool sharpening and maintenance
- General filing, shaping tasks & DIY
-
R87,00
AirCraft Reducing Manifold Brass 3/8" x 1/2" F/F (SB1251P) 1-piece packaged
At a Glance: 3/8" to 1/2" female-to-female brass reducing manifold for stepping between air-line sizes
When your air system needs a neat step-up from 3/8" to 1/2", a proper reducing manifold keeps the job clean and dependable. The AirCraft
SB1251P brass reducing manifold provides a female-to-female (F/F) connection that adapts 3/8" to 1/2", making it ideal for compressors,
regulators, manifolds, filters and general compressed-air plumbing where you’re bridging two common sizes. Crafted from durable, corrosion-resistant
brass, it’s built for workshop reliability and a tidy, serviceable air-line layout.
AirCraft Brass Fittings – Strong Connections, Clean Layouts
AirCraft brass fittings are designed for dependable compressed-air connections where sealing and longevity matter.
This reducing manifold bridges sizes in one compact connector, helping you avoid messy adaptor stacks.
-
R87,00
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: ø180
GRIT: P80
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.
-
R87,00
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: ø180
GRIT: P60
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.
-
R87,00
A flap disc is an abrasive tool made to fit onto an angle grinder to grind and
finish in one operation.
SIZE: ø180
GRIT: P40
SURFACE : 15° conical
Apply light pressure when finishing welds. The flap disc is flexible and will
tend to follow the contours of whatever you are grinding.
-
R87,00
Clamp
capacity: 50mm
Body material: Nickel plated steel
Application:
The spring clamp is manufactured from a nickel plated steel body to resist
corrosion. The poly-vinyl jaws prevent surface damage when clamping.
It is a heavy duty spring clamp for many holding, joining and setting
applications. The spring-operated jaws hold any material quickly and
efficiently within its clamping capacity.
-
R87,00
Diameter: 22mm
Length: 250mm
Tork Craft SDS Plus chisels have super-hard tips for breaking through concrete, tile and masonry. Designed to fit
SDS Plus chucks for secure bit retention.
Application:
- Contractor
- Construction
- Industrial
- Demolitions
- Strip tiles, breaking building materials and shaping.
Tip:
When chiselling with a rotary hammer, it will work faster and more efficiently
if you do not put pressure on it! Allow the drill to do the work.
-
R87,00
|
Specifications:
- High grade alloy steel
- Rust resistant sand blasted finish
- Use with Tork Craft bit holders
- Standard ¼†hex shank
|
 |
Use with the below Tork Craft bit holders:
-
R86,00
AirCraft Reducing Manifold Brass 1/2" x 3/4" F/F (SB1252P) 1-piece packaged
At a Glance: 1/2" to 3/4" female-to-female brass reducing manifold for stepping up air-line capacity
When your air system needs to transition from a 1/2" connection into a larger 3/4" line (or component), you want a reducer that keeps the
layout neat and strong. The AirCraft SB1252P brass reducing manifold provides a female-to-female (F/F) connection that adapts 1/2" to 3/4",
making it ideal for compressors, manifolds, regulators, filters and general compressed-air plumbing where higher-flow sections are common. Built from
durable, corrosion-resistant brass, it’s designed for workshop reliability and a cleaner, more serviceable air-line setup.
AirCraft Brass Fittings – Strong Size Transitions Without Adaptor Stacks
AirCraft brass fittings are made for dependable compressed-air connections where sealing and longevity matter.
This reducing manifold bridges sizes in one compact connector, helping you avoid messy “adapter towersâ€.
-
R86,00
Tork Craft Wood Chisel — 10 mm Blade
A dependable mid-size chisel for general woodworking. The 10 mm blade balances reach and control, making it ideal for paring, fitting tenons, cleaning out joints, and detailed trimming in cabinetry and furniture work.
