Showing 3505–3520 of 4681 resultsSorted by latest
-
R83,00
AirCraft Red Insert T-Joint Side PU 12mm – 10mm (SG APDJ12-10)
At a Glance; Reducing side-branch tee: 12 mm main line with 10 mm branch outlet
The AirCraft SG APDJ12-10 Red Insert T-Joint Side PU 12mm – 10mm is a neat solution for pneumatic systems that need a smaller branch line off a larger main run. It allows a 12 mm tube line to pass straight through the fitting while providing a tidy 10 mm side take-off—ideal for feeding a secondary air circuit, valve, cylinder, or accessory without cluttering your layout with extra reducers. Push-in connections keep installation fast and servicing simple.
Standout feature: reducing side tee for mixed tube sizes
Keep your 12 mm “backbone†line for airflow capacity, then step down to 10 mm where routing is tighter or where a smaller circuit is required. The colour-coded (red) body helps you identify reducing fittings quickly in panels and workshop air setups.
-
R83,00
AirCraft Red Insert T-Joint PU 12mm – 10mm (SG APBJ12-10)
At a Glance; Reducing push-in tee: 12 mm main line to 10 mm branch connections
The AirCraft SG APBJ12-10 Red Insert T-Joint PU 12mm – 10mm is made for clean, high-flow pneumatic branching when your setup needs a strong main feed and slightly smaller distribution lines. It allows a 12 mm tube run through the tee while providing 10 mm branch connections—ideal for workshop air reticulation, machine circuits, manifolds, and installations where fast push-in fitment keeps downtime low and routing stays neat.
Branch and reduce without extra adaptors
This reducing tee combines two jobs in one compact fitting: it splits your line and steps the tube size down at the same time. Fewer joiners means fewer potential leak points, while the push-in collet design makes tubing changes quick and simple.
-
R83,00
AirCraft 90° Elbow Push-In PU Hose Fitting – 14mm x 1/4" Male BSP (SPL14-02)
At a Glance: 90° elbow push-in fitting for 14mm PU hose with a 1/4" Male BSP threaded connection.
When your air line needs a clean turn without kinking the hose, the AirCraft SPL14-02 elbow fitting is the tidy solution. This 90° push-in connector is designed for 14mm PU hose and finishes with a 1/4" Male BSP thread—perfect for routing compressed air around tight corners on compressors, manifolds, regulators, cylinders, and pneumatic tooling. Push the hose in for a secure grip, tighten the threaded end, and you’ve got a compact directional connection that keeps your setup neat, efficient, and easier to service.
Standout feature: Quick push-in connection with a space-saving 90° elbow
Gets 14mm PU hose connected fast while allowing a sharp, controlled turn—ideal for cleaner hose runs and tighter installations.
-
R83,00
AirCraft Brass Conical Straight 1/2" Tube x 1/4" M (SB6808B)
At a Glance: Conical tube-to-thread straight fitting: 1/2" tube to 1/4" male connection
When you’re running larger pneumatic tubing and you need a clean connection into a standard port, a proper tube-to-thread fitting keeps everything
neat, strong and leak-conscious. The AirCraft SB6808B brass conical straight fitting adapts 1/2" pneumatic tubing to a 1/4" male-thread port
in a straight-through layout—ideal for workshop air circuits, manifolds, machinery pneumatics and general compressed-air plumbing. Brass construction
delivers durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing when installed
correctly.
AirCraft Brass Conical Tube Fittings – Big Tube, Clean Port Connection
AirCraft tube fittings are built for practical, serviceable pneumatic layouts.
This straight connector gives you a tidy transition from 1/2" tubing to a 1/4" male-thread port without bulky adaptor stacks.
-
R82,00
Rec. Drill Size: 14.0mm
Diameter: 16mm
Thread: 2.00mm
<!-- 
-->
This robust Carbon Steel Tap is a high-quality tool designed for cutting clean and accurate internal threads. Made
from durable carbon steel, it provides reliable strength and a long service life, making it a valuable addition to
any toolkit. The 16×2.00mm specification indicates a 16mm nominal diameter with a 2.00mm thread pitch, a size
commonly used in heavy-duty applications within the automotive, industrial, and construction sectors. This
individual tap is perfect for professionals and enthusiasts who need to create or repair large, precise threads in
various materials.
Application:
- For cutting internal threads
- Construction
- Manufacturing
- DIY
-
R82,00
Hex
shank: 6.35mm (1/4′)
Length: 54mm
Packaging: Bulk
Application:
The bit holder is used with all hex shank 6.35mm bits. The bit holder features a
magnet to keep the bit in place and to assist with holding screws when
screwdriving.
The shank is compatible with the Snap-it! Quick change connectors:
-
TZ AC33A – Snap-it! Quick change connector
-
TZ AC33B – Snap-it! Quick change connector
-
R82,00
Works with Kit NR8012 or NR5012
Thread length: 12 mm
Qty: 10 Pieces
Restore stripped threads easily and permanently with Tork Craft thread repair
kits. Tork Craft application-specific thread repair kits make complex repairs simple
and are a recommended solution by automakers.
Tork Craft inserts are for permanently repairing tapped holes which have been
stripped or damaged due to wear, corrosion, and over-torqing.
Available in M4, M5, M6, M8, M10 and M12 and in three thread lengths per thread
size.
A quality product by Tork Craft
Let’s make sense of the numbers:
Example:
M4 x 0.7 x 1.0D
M4: The Metric value of the required thread i.e. Metric
4mm
0.7: This is the pitch of the thread
1.0D: this is the installed length of the insert after installation.
Determining the installed length:
M4 x 1.0D = 4mm deep
M4 x 1.5D = 6mm deep
M4 x 2.0D = 8mm deep
Thus, the depth (length) of the installed insert
will be the metric diameter of the thread (in this case M4) multiplied
by the “D†value.
-
R82,00
Diameter: Ø10.0mm
Overall length: 165mm
Shank: 6.35mm hex for quick change
Application:
Use the 4 flute boring bit to drill into wood/timber.
A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.
Benefits:
- The drill spurs have 4 cutting edges that leaves a cleaner and more
precise bored hole.
- Using the same designed screw tip as from an auger drill bit – the 4
flute boring bit feeds itself.
- The shank can be clamped into a 6.35mm quick change chuck or a standard
3 jaw chuck. It also prevents slipping in a chuck.
- The edges of the bit have been hardened and remains sharper for longer.
- The flutes are designed to have excellent chip/shaving clearance.
- 4 cutting edges means faster cutting and more durability.
CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.
-
R82,00
Tork Craft Screwdriver Bit Set — 10 Pcs (PH2×2, PZ2×3, Slotted 6 mm×2, 8 mm×2) (TC02510)
Packaging: Blister/card (10 bits included)
This 10-piece screwdriver bit set from Tork Craft includes two PH2 bits, three PZ2 bits and slotted bits sized 6 mm (two) and 8 mm (two). Ideal for general installation, maintenance and workshop fastening tasks.
-
R82,00
21-Gauge Staples — 8 mm (Box of 5 000)
These 21-gauge staples, with 8 mm legs and supplied in a box of 5 000, are ideal for sewing light fabrics, securing thin panels, attaching linings and trim where deeper penetration is undesirable. Their fine gauge and moderate leg length make them a good fit for delicate materials.
-
R82,00
Diameter: 4 mm
Length: 400 mm
Application:
An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.
The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R82,00
Length: 120mm
Jaw length: 13mm
Maximum jaw opening capacity: 6mm
Classification: Yellow (Standard)
<!-- -->
The Mini End Cutting Plier is a specialized cutting tool designed to provide clean, flush cuts in extremely confined
spaces. With a compact overall length of 120mm, these nippers are engineered for precision work in electronics,
jewelry making, and model building where conventional cutters are too large. The cutting edges are positioned at the
very tip of the jaws and are set perpendicular to the handles, allowing them to snip wires, component leads, and
small materials directly against a surface. This unique design ensures a flush cut with minimal effort, making it
the ideal tool for trimming solder joints on circuit boards or cutting small protruding pins. Constructed from
high-quality, durable steel and featuring comfortable, non-slip handles, this tool offers exceptional control and
reliability for any task requiring a precise, end-on cut.
Application:
- For smaller/ delicate applications.
- For cutting wires, pulling staples/nails.
- Manufacturing
- Construction
- DIY
-
R82,00
Length: 120mm
Jaw length: 55mm
Maximum jaw opening capacity: 27mm
Classification: Yellow (Standard)
<!-- -->
The Mini Needle Nose Plier is a specialized tool engineered for precision and reaching into the most confined
spaces. With an overall length of 120mm, these compact pliers feature exceptionally long, thin, and tapered jaws
that are perfect for manipulating small components, gripping fine wires, and performing intricate work that is
inaccessible to standard tools. They are an essential tool for a variety of tasks, including electronics repair,
jewelry making, and delicate assembly. Crafted from durable steel for longevity and wear resistance, and equipped
with comfortable, non-slip handles, these micro pliers provide the dexterity and control needed for accurate and
detailed work, making them an indispensable addition to any professional or hobbyist’s toolkit.
Application:
- For smaller/ delicate applications.
- For gripping or bending in hard to reach places.
- Manufacturing
- Construction
- DIY
-
R82,00
AirCraft Flow Control Silencer Brass 3/8" BSP Male (SG-SB-10)
At a Glance: 3/8" Male BSP brass flow-control silencer for quieter pneumatic exhaust and smoother air control.
Give your air system a bit of finesse. The AirCraft SG-SB-10 Flow Control Silencer combines a durable brass body with a built-in muffling element to reduce exhaust noise while letting you dial in airflow. Fit it to a pneumatic exhaust port to tame that sharp “psst†and help control cylinder speed or tool response—small part, big quality-of-life upgrade in any workshop or production line.
Standout feauture or series/quality/range AirCraft Precision Flow-Control Silencer
A compact brass silencer with adjustable flow control—built for clean installs, quieter exhaust, and better control where it matters most.
-
R81,00
AirCraft Metal PU Fitting T-Joint 6mm x 1/8′ Male (SG MPT06-01)
At a Glance; 6mm push-in T fitting with a 1/8" male threaded branch for clean air line splitting.
The AirCraft SG MPT06-01 Metal PU Fitting T-Joint makes it simple to branch a 6mm pneumatic line while keeping the layout compact and tidy. It connects two 6mm pneumatic/PU tubes in-line and adds a 1/8" male threaded outlet for a secondary connection—ideal for installing a gauge, valve, regulator, cylinder feed or an extra air line. Built from durable metal and fitted with quick push-in tube ports, this T joint is a reliable choice for workshop and industrial compressed-air systems where clean routing and dependable sealing matter.
Branch your 6mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout organised while adding a threaded port for accessories or a branch connection.
-
R81,00
AirCraft Metal PU Fitting T-Joint 4mm x 1/4′ Male (SG MPT04-02)
At a Glance; 4mm push-in T fitting with a 1/4" male threaded branch for clean air line splitting.
The AirCraft SG MPT04-02 Metal PU Fitting T-Joint makes it simple to branch a 4mm pneumatic line into a common 1/4" threaded port—neatly and reliably. It connects two 4mm pneumatic/PU tubes in-line and adds a 1/4" male threaded outlet for a secondary connection, ideal for installing a gauge, valve, regulator, cylinder feed or an extra air line. Compact and built from durable metal, this T joint is a great choice for workshop and industrial compressed-air systems where clean routing and dependable sealing matter.
Branch your 4mm air line with a rugged AirCraft metal push-in T-joint
A compact tee fitting that keeps your pneumatic layout tidy while adding a threaded port for accessories or a branch connection.
