Showing 3521–3536 of 4680 resultsSorted by latest
-
R81,00
AirCraft Quick Coupler German Type 1/4" Female BSP (SG5000-1P) 1-Piece Packaged
At a Glance: German-type quick coupler with 1/4" inch BSP Female (F) thread
The AirCraft SG5000-1P Quick Coupler (German Type) is the right choice when your workshop or equipment is standardised on a German-profile quick-connect system.
It threads onto compatible 1/4" inch BSP male fittings and gives you rapid connect/disconnect convenience for compressed-air tools, hoses and pneumatic accessories.
The result: faster tool swaps, fewer interruptions, and a setup that stays compatible with the coupler style you already use.
Standout feauture or series/quality/range AirCraft German-Type Quick-Connect Compatibility
Quick couplers only feel “quick†when the profiles match. Choosing the correct German-type coupler helps avoid frustrating misfits and keeps your air system consistent.
-
R81,00
Hole saw diameter:
ø32mm
Use mandrel:
TC17004
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R81,00
Tork Craft Polisher Service Kit Cord Clamp & Sleeve (45/45) For POL06
At a Glance: Cord clamp and sleeve set for secure cable strain relief on the POL06 polisher
The Tork Craft polisher service kit cord clamp & sleeve (Cat No. POL06-SK13) is a genuine replacement set for the
Tork Craft POL06 polisher. The cord clamp and rubber sleeve work together where the power cable enters the tool,
gripping and supporting the lead so that tugging on the cord does not stress the internal wiring or switch.
When these parts are worn, cracked or missing, the cable can move excessively, exposing conductors and creating a safety risk.
Fitting this original POL06-SK13 kit restores firm strain relief and a neat, protected cable entry so your polisher can be used with confidence.
Standout feature: Genuine cord clamp and sleeve set for the POL06 cable entry
Designed specifically for positions 45/45 on the POL06 spare parts diagram, this kit matches the original housing recess and cable diameter,
ensuring the cord is properly supported, clamped and shielded against sharp edges and repeated bending.
-
R81,00
Tork Craft Polisher Service Kit Cord Clamp And Sleeve (33, 41, 43) For POL05
At a Glance; Cord clamp and sleeve kit for safe power cable support on the Tork Craft POL05 polisher.
Keep the power cable on your Tork Craft POL05 neat, secure and protected with this genuine cord clamp and sleeve service kit.
The clamp and flexible sleeve work together to provide strain relief where the cable enters the rear of the polisher, reducing stress on the internal wiring every time you move or twist the tool during polishing.
Over time, the original parts can harden, crack, loosen or go missing after a repair, leaving the cord unsupported and more likely to fail where it enters the handle.
The POL05-SK15 kit replaces the key cord support components (items 33, 41 and 43 on the parts diagram) so the cable is once again held firmly in place and shielded from sharp bends.
-
R81,00
Tork Craft Pipe Cleaner & Deburer Tube Brush 15 mm and 19 mm Wire Brushes
At a Glance: 2-piece internal tube/pipe brush set for cleaning and deburring pipes and hard-to-reach internal passages
The Tork Craft TCWPC001 pipe cleaner set includes two wire tube brushes sized 15 mm and 19 mm — designed to reach inside tubing, pipes, cylinders, fittings and other confined internal passages. The brushes are perfect for removing rust, scale, paint residue, corrosion and debris from inner surfaces, or deburring the inside of metal or plastic pipes before threading, welding or sealing. A handy accessory for plumbers, metalworkers, fabricators and maintenance workshops tackling internal pipe cleaning or refurbishment tasks.
Standout feature – Dual-size wire tube brushes for internal cleaning and deburring tasks
This compact set gives you two brush diameters so you can match brush size to pipe or tube internal diameter — ideal when cleaning or prepping different sizes of pipes. The wire construction ensures effective removal of rust, scale and debris without damaging the internal surfaces when used correctly.
-
R81,00
Tork Craft Wire Cup Brush 63 mm ø x 6 mm Shaft (Stainless Steel)
At a Glance: 63 mm diameter stainless-steel wire cup brush with 6 mm shaft — ideal for rust, paint and corrosion removal on metals
The Tork Craft Wire Cup Brush 63 mm ø x 6 mm Shaft (Model TCW SS6306) is a compact, corrosion-resistant cup brush designed for robust surface preparation tasks on metal materials. Its stainless-steel bristles make it suitable for use on stainless steel, aluminium, cast metal and other alloys where contamination from carbon wire brushes must be avoided. The 63 mm diameter and 6 mm shaft enable compatibility with drills, die grinders or small rotary tools — making it an excellent choice for cleaning, smoothing or removing rust, old paint, weld slag or corrosion in confined spaces, corners, weld seams and irregular surfaces.
Stainless-steel wire cup brush for clean, contamination-free metal surface prep
Built for precision and versatility in metal fabrication, maintenance, restoration or DIY workshops, this brush offers effective cleaning power while preserving surface integrity of sensitive metals and alloys. Whether you are removing rust from small castings, cleaning weld seams, stripping old paint, or preparing surfaces for coating or welding — this cup brush ensures contamination-free, durable cleaning with reliable performance and long life.
-
R81,00
Width: 60 mm
Thread Size: 14 mm
Application:
The Tork Craft TCW CR are cup shaped brushing tools with carbon steel or stainless steel filaments. Part manufacturers and machine shops use them for surface preparation,deburring, and surface finishing. Brush diameter, wire size, and trim length are important to consider.
- Direct mounting on angle grinders
- For light and medium brushing
- Can be used on flat or irregular surfaces
- Bevel buffing of copper, brass and bronze
- Easy to handle due to its flexible wires
- USed to finish different types of metals
- Removes flaking paint, rust, scratches, dirt and small imperfections
- Can also be used on concrete, metal, stone & wood surfaces
- Can also be used to clean and polish surfaces
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R81,00
Pozidrive
Tip #:
1
Length: 80mm
Application:
The screwdriver is designed to be ergonomic and wear resistant. The tip has
been hardened for optimum durability.
The VDE (Verband der Elektrotechnik) certified screwdriver is insulated to
withstand 1000V and is suitable for work on electrical equipment.
Pozidrive sizes available:
#0 x 60mm –
TC16035
#1 x 80mm –
TC16036
#2 x 100mm –
TC16037
-
R80,00
FIXMAN 1/2′ DR.7 X 100MM HEAX ALLEN BIT SOCKET H7
-
R80,00
FIXMAN S/DRIVER PHILLIPS PH4 8X200MM CRV WITH ERGONOMIC HANDLE
-
R80,00
FIXMAN S/DRIVER SLOTTED 8X1.2X100MM CRV WITH ERGONOMIC HANDLE
-
R80,00
Tork Craft 4-Piece Screwdriver Set — Black Handle (Model KT2554)
This 4-piece Tork Craft screwdriver set is perfect for everyday repairs, assembly, and maintenance. It combines durable slotted and Phillips screwdrivers with robust black plastic handles, ensuring dependable grip and long service life. Ideal for workshops, toolboxes, and general household use.
-
R80,00
Tork Craft Centre Punch 5 × 10 × 100 mm (Black Finish)
Heading: 5 mm point × 10 mm diameter × 100 mm length—ideal for workshop marking and indenting
The Tork Craft TCPU05100 is a durable centre punch featuring a sharp point for precise indenting on metal surfaces and other materials to guide drilling or fabrication work.
Finished in black-oxide for corrosion resistance and minimal glare, its 100 mm length gives good reach, while the 10 mm diameter gives firm grip and control for accurate marking in workshop or industrial environments.
-
R80,00
The flap a
wheel has a ø6mm steel shank and it runs through
the wheel creating better balance to reduce operator fatigue. Used with portable
drills or die grinders.
SIZE: ø80mm
WIDTH: 40mm
SHANK: Ø6mm
GRIT: P80
Application:
These flap wheels
are used in the metal fabrication and welding industry for stock removal,
blending, deburring, cleaning, finishing and polishing.
Designed to deliver a consistant finish with a uniform rate of cut. Flap wheels
wear away, continually exposing new Aluminium Oxide abrasives. These abrasives
are a good choice for hard-to-grind materials such as aluminium, bronze, brass,
stainless steel, carbon steel and titanium.
Flap wheels can be used for achieving a satin finish on steel, aluminium, brass
and hard plastics.
Wear eye, face, body and respiratory protection.
-
R80,00
The flap a
wheel has a ø6mm steel shank and it runs through
the wheel creating better balance to reduce operator fatigue. Used with portable
drills or die grinders.
SIZE: ø80mm
WIDTH: 30mm
SHANK: Ø6mm
GRIT: P80
Application:
These flap wheels
are used in the metal fabrication and welding industry for stock removal,
blending, deburring, cleaning, finishing and polishing.
Designed to deliver a consistant finish with a uniform rate of cut. Flap wheels
wear away, continually exposing new Aluminium Oxide abrasives. These abrasives
are a good choice for hard-to-grind materials such as aluminium, bronze, brass,
stainless steel, carbon steel and titanium.
Flap wheels can be used for achieving a satin finish on steel, aluminium, brass
and hard plastics.
Wear eye, face, body and respiratory protection.
-
R80,00
The flap a
wheel has a ø6mm steel shank and it runs through
the wheel creating better balance to reduce operator fatigue. Used with portable
drills or die grinders.
SIZE: ø80mm
WIDTH: 30mm
SHANK: Ø6mm
GRIT: P120
Application:
These flap wheels
are used in the metal fabrication and welding industry for stock removal,
blending, deburring, cleaning, finishing and polishing.
Designed to deliver a consistant finish with a uniform rate of cut. Flap wheels
wear away, continually exposing new Aluminium Oxide abrasives. These abrasives
are a good choice for hard-to-grind materials such as aluminium, bronze, brass,
stainless steel, carbon steel and titanium.
Flap wheels can be used for achieving a satin finish on steel, aluminium, brass
and hard plastics.
Wear eye, face, body and respiratory protection.
