Tools – Page 240 – Part Link

Showing 3825–3840 of 4679 resultsSorted by latest

Tork Craft Tube Brush 15Mm X 120Mm Brass Wire 6,35Mm Hex Shank
R30,00
Brass Wire Tube Brush

Diameter: 15mm
Wire Type: Solid Brass
Hex Shank: 1/4â€ (6.35mm)
Working Length: 45mm
Overall length: 120mm



This high-quality Tube Brush is perfect for cleaning narrow and hard-to-reach internal surfaces. The brass wire
bristles are tough enough to effectively remove rust, carbon, and other debris from tubes, pipes, and cylinders, yet
soft enough to prevent scratching. Featuring a 6,35mm (1/4′) hex shank, this brush is compatible with most power
drills and impact drivers, allowing for efficient and precise cleaning with a simple push-and-pull motion. Its
durable construction and long reach make it an ideal tool for a variety of tasks, from automotive maintenance and
plumbing work to firearm cleaning and general household projects.

Application:
- Versatile: Ideal for soft metals, light rust, and oxidation removal.
- Durable: Brass wires resist corrosion and maintain shape over multiple uses.
- Polishing and cleaning soft metals (copper, brass, aluminium).
- Deburring edges without damaging surfaces.
- Removing light rust, oxidation, or paint.
- Internal cleaning tubes and pipes.
Add to cart
Tork Craft Square Recess Ins.Bit No.3X25Mm 2/Card
R30,00
Robertson square recess bit

Robertson
Tip #: 3
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Carded 2

Application:

The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.

The shank is compatible with the following bit holders:
- T 938001 – Magnetic screwdriver bit holder.
- TZ AC23 – Magnetic screw guide and extension.
- TCFS200 – Flexible shaft bit holder.
- T AD14014C – 1/4′ socket adaptor.
- T BH54C – Magnetic bit holder and extension 54mm (carded).
- T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
- T BH75C – Magnetic bit holder and extension 75mm (carded).
- T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:

25mm:

#0 – 25mm –

T SQ0025B
#1 – 25mm –

T SQ0125B
#2 – 25mm –

T SQ0225B
#3 – 25mm –

T SQ0325B

50mm:

#0 – 50mm –

T SQ0050B
#1 – 50mm –

T SQ0150B
#2 – 50mm –

T SQ0250B
#3 – 50mm –

T SQ0350B

150mm:

#1 – 150mm –

T SQ01150B
#2 – 150mm –

T SQ02150B
#3 – 150mm –

T SQ03150B

IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Add to cart
Tork Craft Square Recess Insert Bit No.0X25Mm 2/Card
R30,00
Robertson square recess bit

Robertson
Tip #: 0
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Carded 2

Application:

The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.

The shank is compatible with the following bit holders:
- T 938001 – Magnetic screwdriver bit holder.
- TZ AC23 – Magnetic screw guide and extension.
- TCFS200 – Flexible shaft bit holder.
- T AD14014C – 1/4′ socket adaptor.
- T BH54C – Magnetic bit holder and extension 54mm (carded).
- T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
- T BH75C – Magnetic bit holder and extension 75mm (carded).
- T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:

25mm:

#0 – 25mm –

T SQ0025B
#1 – 25mm –

T SQ0125B
#2 – 25mm –

T SQ0225B
#3 – 25mm –

T SQ0325B

50mm:

#0 – 50mm –

T SQ0050B
#1 – 50mm –

T SQ0150B
#2 – 50mm –

T SQ0250B
#3 – 50mm –

T SQ0350B

150mm:

#1 – 150mm –

T SQ01150B
#2 – 150mm –

T SQ02150B
#3 – 150mm –

T SQ03150B

IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Add to cart
Fixman Socket Adaptor 1/4F X 3/8M Square
R30,00
FIXMAN SOCKET ADAPTOR 1/4F X 3/8M SQUARE

Add to cart
Fixman 3/8′ Drive E-Socket 6 Point E20
R30,00
FIXMAN 3/8′ DRIVE E-SOCKET 6 POINT E20

Add to cart
Fixman 1/4′ Dr Deep Socket 12Mm
R30,00
FIXMAN 1/4′ DR DEEP SOCKET 12MM

Add to cart
Fixman 7 Drawer Spare Drawer Clip Assembly Kit
R30,00
FIXMAN 7 DRAWER SPARE DRAWER CLIP ASSEMBLY KIT

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 320Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 320 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 240Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 240 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 180Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 180 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 150Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 150 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 120Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 120 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 100Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 100 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 80Grit 2/Pack (For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 80 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Sanding Belt 60 X 400Mm 60Grit 2/Pack ( For Triton Palm Sander)
R30,00

Sanding belt for Belt Sander – 60 Grit

Compatible with all belt sanders that require sanding belts 60mm wide and 400mm
long.
High quality Aluminium Oxide belts for use with wood and metal.

Size: 60mm x 400mm
Grits Available: P40, P60, P80, P100, P120 etc.

We recommend that you make sure of the exact size required for the
belt sander as per its specifications. The belt may slip if it is too long or break
if it is too short. A belt that is too short will cause extreme load on the bearings/bushings,
shortening the machineâ€™s lifespan.

Add to cart
Tork Craft Mini Tungsten Carb. Cutter 2.4Mm Ball 3.2Mm Shank
R30,00
Mini Tungsten Carbide Cutter

Tip Diameter: Ø2.4mm
Shank Diameter: Ø3.2mm
Shape: Ball

Achieve a new level of intricate detail with the 2.4mm Mini Tungsten Carbide Ball Cutter, a precision-engineered bit
designed for the most delicate carving and hollowing tasks. The small, spherical ball shape is perfectly suited for
creating tiny dimples, engraving fine lines, and seating small gemstones with absolute accuracy. Its ability to cut
in any direction makes it a favorite for artists and technicians who need to sculpt fluid, organic shapes within a
confined workspace.

This cutter features a 2.4mm tip diameter paired with a heavy-duty 3.2mm shank, providing a robust foundation that
reduces the risk of tool flex or breakage. This ‘necked-down’ design allows for superior visibility around the
cutting head, ensuring you can see exactly where the bit meets the material. The universal 3.2mm shank ensures
seamless compatibility with almost all standard rotary tools and high-speed handpieces.

Manufactured from high-grade tungsten carbide, this tool is built for longevity and extreme performance. It stays
sharp significantly longer than standard steel bits, even when working on challenging substrates like hardened
steel, precious metals, hardwoods, and glass-reinforced plastics. The precision-ground flutes are designed to clear
chips efficiently, which prevents heat buildup and ensures a clean, smooth finish without the need for extensive
secondary sanding.

This 2.4mm ball cutter is a vital tool for jewelers, dental lab technicians, and micro-modelers. Whether you are
hollowing out a delicate wax mold, deburring tiny mechanical components, or adding micro-textures to a sculpture,
this carbide burr provides the industrial strength and surgical finesse required for high-stakes, high-detail
craftsmanship.

Application:
- Max RPM: 35 000 RPM
- Aluminium: 20 000 – 25 000RPM
- Brass: 20 000 – 25 000RPM
- Ceramic: 20 000 – 25 000RPM
- Copper: 20 000 – 25 000RPM
- Glass: 25 000 – 30 000RPM
- Hardwood: 30 000RPM
- Softwood: 35 000RPM
- Plastic: 15 000RPM
- Shell: 10 000 – 15 000RPM
- Steel: 10 000 – 15 000RPM
- Stone: 10 000 – 15 000RPM
- Contractor
- Fabrication
- Woodworking
- DIY
Add to cart