Showing 3841–3856 of 4679 resultsSorted by latest
This 300-series stainless steel hose clamp spans 40 mm to 64 mm in diameter. Its robust stainless construction, paired with a worm-drive mechanism, delivers dependable clamping force for plumbing, HVAC, workshop or general hose installations.
Drill diameter: Ø5.2mm
Packaging: Bulk – 1 Piece
Point: 135° split point
Drill bit: HSS (High-speed steel)
The double end stubby drill bit is made from HSS (hi-speed steel) and is
precision fully ground at 135° with a split point.
The split point adds 2 extra cutting edges with the adantage of reducing the
amount of pressure required to perform the cut.
The sturdy double end allows
for twice the usage making the drill bit more economical and practical. Ideal for autobody repair work.
The drill bits are re-sharpenable several times. We recommend the following
machines as it will sharpen 135° HSS split point drill bits with ease:
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
For half-sheet orbital sanders that have clamps on the base plate.
SIZE: 115 x 280mm
GRIT: P80
HOLES: No
BACKING: Plain
The orbital sander sheets have been precut to fit most half sheet orbital
sanders.
The abrasives are made of aluminium oxide
and can be used on either wood or metals.
Orbital sanders cause
swirl marks. A stray piece of grit or a larger bit of dust could be embedded on
the abrasive sheet whilst sanding. Try to move the sander slowly when sanding.
Any fast movements can cause noticeable swirl marks.
Slot-head
size:
10mm
Hex shank: 6.35mm (1/4′)
Length: 50mm
Packaging: Carded 1
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the Snap-it! quick change connectors:
25mm (Carded 2):
Slot-head 3.0 x 25mm –
T SL0325C
Slot-head 4.0 x 25mm –
T SL0425C
Slot-head 5.0 x 25mm –
T SL0525C
Slot-head 6.0 x 25mm –
T SL0625C
Slot-head 8.0 x 25mm –
T SL0825C
50mm (Carded 1):
Slot-head 3.0 x 50mm –
T SL0350C
Slot-head 4.0 x 50mm –
T SL0450C
Slot-head 5.0 x 50mm –
T SL0550C
Slot-head 6.0 x 50mm –
T SL0650C
Slot-head 8.0 x 50mm –
T SL0850C
Slot-head 10.0 x 50mm –
T SL1050C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Slot-head
size:
8mm
Hex shank: 6.35mm (1/4′)
Length: 50mm
Packaging: Carded 1
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the Snap-it! quick change connectors:
25mm (Carded 2):
Slot-head 3.0 x 25mm –
T SL0325C
Slot-head 4.0 x 25mm –
T SL0425C
Slot-head 5.0 x 25mm –
T SL0525C
Slot-head 6.0 x 25mm –
T SL0625C
Slot-head 8.0 x 25mm –
T SL0825C
50mm (Carded 1):
Slot-head 3.0 x 50mm –
T SL0350C
Slot-head 4.0 x 50mm –
T SL0450C
Slot-head 5.0 x 50mm –
T SL0550C
Slot-head 6.0 x 50mm –
T SL0650C
Slot-head 8.0 x 50mm –
T SL0850C
Slot-head 10.0 x 50mm –
T SL1050C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
Slot-head
size:
3mm
Hex shank: 6.35mm (1/4′)
Length: 50mm
Packaging: Carded 1
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the Snap-it! quick change connectors:
25mm (Carded 2):
Slot-head 3.0 x 25mm –
T SL0325C
Slot-head 4.0 x 25mm –
T SL0425C
Slot-head 5.0 x 25mm –
T SL0525C
Slot-head 6.0 x 25mm –
T SL0625C
Slot-head 8.0 x 25mm –
T SL0825C
50mm (Carded 1):
Slot-head 3.0 x 50mm –
T SL0350C
Slot-head 4.0 x 50mm –
T SL0450C
Slot-head 5.0 x 50mm –
T SL0550C
Slot-head 6.0 x 50mm –
T SL0650C
Slot-head 8.0 x 50mm –
T SL0850C
Slot-head 10.0 x 50mm –
T SL1050C
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
At a Glance; Genuine replacement bearing for the Tork Craft POL05 polisher motor / gearbox assembly.
Keep your Tork Craft POL05 running smooth and controlled with this dedicated replacement bearing.
The bearing supports a key rotating shaft in the POL05 – typically at the motor or gear box – helping to keep everything aligned so the pad runs true and the tool feels solid in your hands.
When this bearing starts to wear, you will hear more noise, feel extra vibration and may notice the backing pad no longer running as smoothly as it used to.
Fitting the genuine POL05-08 bearing restores proper support at that point in the drive system so your polisher can get back to quiet, confident work on paint, gelcoat and metal surfaces.
At a Glance: Genuine replacement bearing for Tork Craft POL06 polisher
This Tork Craft polisher bearing (Cat No. POL06-08) is a genuine replacement spare designed specifically for the Tork Craft POL06 polisher.
A worn or noisy bearing can cause vibration, affect the tool’s performance and shorten its lifespan.
Swapping in this replacement bearing helps restore smooth rotation, reduce excess noise and keep your polisher running reliably for longer,
whether you’re polishing stainless steel, pipework or other metal surfaces.
Purpose-made for the Tork Craft POL06 polisher, this bearing is part of the original spare parts range,
ensuring a proper fit, consistent performance and dependable support for the rotating components inside your machine.
Colour: Grey
A paint marker is a versatile writing tool that uses a specialized ink to create bold, long-lasting marks on a
variety of surfaces. It consists of a metal body with a plastic cap, and a valve mechanism to control ink
flow.
Surface Application:
Colour: Bronze
A paint marker is a versatile writing tool that uses a specialized ink to create bold, long-lasting marks on a
variety of surfaces. It consists of a metal body with a plastic cap, and a valve mechanism to control ink
flow.
Surface Application:
Colour: Red
A paint marker is a versatile writing tool that uses a specialized ink to create bold, long-lasting marks on a
variety of surfaces. It consists of a metal body with a plastic cap, and a valve mechanism to control ink
flow.
Surface Application:
Packaging: Single socket carded
High-performance 13 mm socket from Tork Craft. Crafted from chromium-vanadium alloy steel for resilience, with a ½″ square drive to fit standard workshop ratchets, and a 12-point internal profile for reliable engagement in constrained and high-torque settings. Ideal for mechanical, industrial and maintenance tool kits.
At a Glance: 90° push-in elbow connector for 8mm PU (polyurethane) tubing
The AirCraft SG APLJ08 Insert Elbow PU 8mm is built for neat pneumatic installations where you need a clean 90° turn without stressing the air line. Sized for 8mm polyurethane (PU) tube, this compact elbow helps prevent kinks, keeps hose runs tidy, and makes routing in tight spaces far easier—perfect for workshop air systems, spray equipment and pneumatic tools.
This push-in elbow fitting locks the tube in place with a simple push, and releases via the collar when you need to remove or replace the line. It’s an efficient, workshop-friendly way to route 8mm pneumatic tubing around corners while keeping your setup clean and reliable.
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
Drill bit diameter: Ø6.35mm
Drill bit: TCT (Tungsten Carbide Tipped)
The drill bit is a replacement pilot drill bit for Tungsten Carbide Tipped
(TCT) hole saws.
Replacing the pilot drill bit:
At a Glance; Reducing side-branch tee: 6 mm main line with 4 mm branch outlet
The AirCraft SG APDJ06-04 Red Insert T-Joint Side PU 6mm – 4mm is a smart space-saver for pneumatic systems that need a smaller branch line off a larger main run. It allows a 6 mm tube line to pass through the fitting while providing a neat 4 mm side take-off—perfect for feeding a smaller valve, gauge, airbrush line, pilot line, or accessory without reworking your entire air layout. The push-in connections make installation quick and maintenance painless.
This side-branch tee helps you keep a stronger 6 mm main line for airflow, while stepping down to a 4 mm branch where compact routing is needed. The colour-coded (red) body makes identification easier in busy panels and workshop setups.
No products in the cart.