Showing 3889–3904 of 4679 resultsSorted by latest
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
It is suitable for engraving on the following materials:
QTY: 1
The steel engraving cutter is designed to be accurate, precise and compact for engraving fine and intricate projects using a rotary tool.
Applications:
It is suitable for engraving on the following materials:
QTY: 1
At a Glance; 8 mm tube tee with 1/8" BSP male thread for neat, compact air line branching
The AirCraft SG APD08-01 PU Hose Fitting Tee 8mm x 8mm x 1/8" BSP is a smart hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into a threaded port at the same time. With two 8 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating tubing runs into gauge blocks, compact valves, small manifolds and control components—keeping your air layout tidy, reliable and easy to maintain.
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air system.
At a Glance: Conical brass reducer adaptor with 1/4 x 1/8 male/female threads supplied as a 1-piece pack.
The AirCraft SB1228P conical brass reducer is a compact adaptor designed to connect pneumatic components while stepping between 1/4 and 1/8 thread sizes, using a male/female configuration.
The conical profile is suited to applications where a secure, reliable threaded connection is important, making it a handy choice for gauges, regulators, valves, manifolds and air tool accessories.
Supplied as a 1-piece pack, it’s ideal for quick repairs, clean new installations, or keeping a spare in the workshop for the next “why doesn’t this fitting match?†moment.
One proper reducer beats a stack of adaptors every time. The SB1228P keeps your connections compact, tidy and more reliable, with the convenience of a single-pack format for maintenance and spares.
At a Glance; Reducing straight push-in connector for 10 mm to 6 mm pneumatic tubing
The AirCraft SG APGJ10-06 Red Insert Straight PU 10mm – 6mm is a clean, space-saving way to step down your air line from a 10 mm main run to a 6 mm tube. It’s ideal when you want the airflow capacity of a larger line but need to connect to compact valves, cylinders, pilot lines, gauges, or smaller pneumatic accessories. Push-in connections keep installation quick and tidy, while the colour-coded red body makes reducers easy to identify in busy pneumatic layouts.
Keep your “backbone†line larger for better airflow and response, then reduce only where the smaller circuit is needed. This reduces clutter, helps reduce pressure drop, and simplifies troubleshooting later.
Daimeter: Ø16.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
StandardNotice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
Packaging: Carded (2 blades per pack)
Designed for smooth, clean cutting in wood, laminate board and plastics — the 2.3 mm body with 11 teeth per inch delivers low-tear cutting and precise finishing. A great blade choice for cabinet fitters, carpenters and installers who want a clean visible-edge finish.
At a Glance: 10mm push-in tube to 1/8" BSP Male (M) thread with O-ring seal
Build a cleaner, faster air line setup with the AirCraft SG SPC10-G01 straight stud fitting. Designed to join 10mm pneumatic tubing to a 1/8" BSP male threaded port, it uses a push-in collet for speedy tube connections and an O-ring to help create a dependable seal at the port interface. It’s a practical choice for workshop air systems, compressor plumbing, regulators and manifolds—anywhere you want a compact straight-through connection you can trust.
The integrated O-ring supports a tighter port seal, helping reduce annoying air leaks while keeping installation simple and tidy—push in the tube, tighten the thread, and you’re ready to go.
Shank:
U-shank
Distance between teeth: 2.5mm
Total length: 100mm
Teeth Per Inch: 10TPI
Packaging: Pack of 2
The jigsaw blades are used to cut:
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
CAUTION:
The cutting direction of these jigsaw blades are reversed. Clamp the workpiece
down before using the jigsaw. The blades could lift the jigsaw from the
workpiece when cutting. A plunge cut cannot be made with reversed jigsaw blades.
Shank:
U-shank
Distance between teeth: 1.3mm
Total length: 77mm
Teeth Per Inch: 20TPI
Packaging: Pack of 2
The jigsaw blades are used to cut:
NOTE:
The cutting part of the blade is +/-26mm less than the total length.
Daimeter: Ø14.0mm
Working length: 150mm
Shank: 6.35mm hex for quick change
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Manufactured from High carbon steel. Spade bits are also known as paddle bits
or butterfly bits.
StandardNotice the two different spade bits in the picture on the left. The one is a standard
spade bit and the other is a Pro series spade bit. The Pro series spade bit is
equipped with spurs to cut cleaner and faster than standard spade bits. Click
here to have a look at the Pro series spade bits.
TIP:
To avoid splintering, drill the workpiece from both ends.
At a Glance: German-style quick coupling plugs with 3/8 inch male BSP thread (2pc pack)
The AirCraft SG11001P Connector (German profile) is a simple way to make compressed air work faster and feel more organised. Each plug features a 3/8 inch male BSP threaded end for secure fitment to compatible tools, adaptors, manifolds or hose fittings—then connects instantly to German-style quick couplers for rapid hook-ups and tool changes. Supplied as a convenient two-piece pack, it’s ideal for fitting multiple tools, setting up a spare, or standardising your workshop connections without hunting for parts at the worst possible moment.
Fit two tools, or keep one as backup—either way, you get quick coupler speed with a robust 3/8 thread connection.
Size/Length: 5/16″ (7.9 mm) Hex × 42 mm Length
The Tork Craft 5/16″ × 42 mm magnetic impact nutsetter is perfect for high-volume or production fastening of 5/16″ machine screws and bolts. Its magnetised tip keeps fasteners secure as you reach into panels or assemblies, the 42 mm length gives access in shallower depths, and it’s built for use with impact drivers where speed and reliability matter.
This heavy duty worm-drive hose clamp fits hose diameters from 135 mm to 159 mm. It provides a strong and adjustable grip for flexible ducting, plumbing, automotive and industrial tubing applications.
At a Glance: Y-branch fitting with two 4mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX04-02 PU Hose Fitting Y Joint 4mm x 1/4" M BSP is a compact, workshop-ready way to branch a single air feed into two 4mm PU hose lines while screwing securely into a 1/4" BSP threaded port. It’s ideal for pneumatic systems where you need to split airflow to two lines—such as feeding two small cylinders, air-assist lines, gauges, or control circuits—without turning your installation into a maze of adaptors. With push-in speed on the 4mm ports and a dependable threaded connection, it keeps your air routing neat, serviceable, and built for quick maintenance.
Create a clean branch line in seconds—push your 4mm hoses in to lock, then use the 1/4" BSP thread for a solid connection to valves, manifolds, regulators, or equipment ports.
No products in the cart.