Showing 4449–4464 of 4681 resultsSorted by latest
-
R7,00
Size: T27H
Length: 25mm
Torque limit (Nm): 26.9
<!-- ![]()
-->
Torx tamper resistant insert bits are specialized tools designed to work with security screws that have a pin or
post in the center of the star-shaped head. These screws are commonly used in applications where tampering or
unauthorized access is a concern, such as electronics, automotive components, and high-security enclosures.
Application:
- Used to fasten and loosen screws where ordinary screwdrivers won’t work, offering protection against unauthorized
disassembly or adjustment of fasteners in critical installations.
- Construction
- Manufacturing
- DIY
-
R7,00
Size: T25H
Length: 25mm
Torque limit (Nm): 19
<!-- ![]()
-->
Torx tamper resistant insert bits are specialized tools designed to work with security screws that have a pin or
post in the center of the star-shaped head. These screws are commonly used in applications where tampering or
unauthorized access is a concern, such as electronics, automotive components, and high-security enclosures.
Application:
- Used to fasten and loosen screws where ordinary screwdrivers won’t work, offering protection against unauthorized
disassembly or adjustment of fasteners in critical installations.
- Construction
- Manufacturing
- DIY
-
R7,00
Size: T15H
Length: 25mm
Torque limit (Nm): 7.7
<!-- ![]()
-->
Torx tamper resistant insert bits are specialized tools designed to work with security screws that have a pin or
post in the center of the star-shaped head. These screws are commonly used in applications where tampering or
unauthorized access is a concern, such as electronics, automotive components, and high-security enclosures.
Application:
- Used to fasten and loosen screws where ordinary screwdrivers won’t work, offering protection against unauthorized
disassembly or adjustment of fasteners in critical installations.
- Construction
- Manufacturing
- DIY
-
R7,00
Size: T10H
Length: 25mm
Torque limit (Nm): 4.5
<!-- ![]()
-->
Torx tamper resistant insert bits are specialized tools designed to work with security screws that have a pin or
post in the center of the star-shaped head. These screws are commonly used in applications where tampering or
unauthorized access is a concern, such as electronics, automotive components, and high-security enclosures.
Application:
- Used to fasten and loosen screws where ordinary screwdrivers won’t work, offering protection against unauthorized
disassembly or adjustment of fasteners in critical installations.
- Construction
- Manufacturing
- DIY
-
R7,00
Robertson
Tip #: 3
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Bulk
Application:
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
-
T 938001 – Magnetic screwdriver bit holder.
-
TZ AC23 – Magnetic screw guide and extension.
-
TCFS200 – Flexible shaft bit holder.
-
T AD14014C – 1/4′ socket adaptor.
-
T BH54C – Magnetic bit holder and extension 54mm (carded).
-
T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
-
T BH75C – Magnetic bit holder and extension 75mm (carded).
-
T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:
25mm:
#0 – 25mm –
T SQ0025B
#1 – 25mm –
T SQ0125B
#2 – 25mm –
T SQ0225B
#3 – 25mm –
T SQ0325B
50mm:
#0 – 50mm –
T SQ0050B
#1 – 50mm –
T SQ0150B
#2 – 50mm –
T SQ0250B
#3 – 50mm –
T SQ0350B
150mm:
#1 – 150mm –
T SQ01150B
#2 – 150mm –
T SQ02150B
#3 – 150mm –
T SQ03150B
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
-
R7,00
Robertson
Tip #: 2
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Bulk
Application:
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
-
T 938001 – Magnetic screwdriver bit holder.
-
TZ AC23 – Magnetic screw guide and extension.
-
TCFS200 – Flexible shaft bit holder.
-
T AD14014C – 1/4′ socket adaptor.
-
T BH54C – Magnetic bit holder and extension 54mm (carded).
-
T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
-
T BH75C – Magnetic bit holder and extension 75mm (carded).
-
T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:
25mm:
#0 – 25mm –
T SQ0025B
#1 – 25mm –
T SQ0125B
#2 – 25mm –
T SQ0225B
#3 – 25mm –
T SQ0325B
50mm:
#0 – 50mm –
T SQ0050B
#1 – 50mm –
T SQ0150B
#2 – 50mm –
T SQ0250B
#3 – 50mm –
T SQ0350B
150mm:
#1 – 150mm –
T SQ01150B
#2 – 150mm –
T SQ02150B
#3 – 150mm –
T SQ03150B
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
-
R7,00
Robertson
Tip #: 1
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Bulk
Application:
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
-
T 938001 – Magnetic screwdriver bit holder.
-
TZ AC23 – Magnetic screw guide and extension.
-
TCFS200 – Flexible shaft bit holder.
-
T AD14014C – 1/4′ socket adaptor.
-
T BH54C – Magnetic bit holder and extension 54mm (carded).
-
T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
-
T BH75C – Magnetic bit holder and extension 75mm (carded).
-
T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:
25mm:
#0 – 25mm –
T SQ0025B
#1 – 25mm –
T SQ0125B
#2 – 25mm –
T SQ0225B
#3 – 25mm –
T SQ0325B
50mm:
#0 – 50mm –
T SQ0050B
#1 – 50mm –
T SQ0150B
#2 – 50mm –
T SQ0250B
#3 – 50mm –
T SQ0350B
150mm:
#1 – 150mm –
T SQ01150B
#2 – 150mm –
T SQ02150B
#3 – 150mm –
T SQ03150B
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
-
R7,00
Robertson
Tip #: 0
Hex shank: 6.35mm (1/4′)
Length: 25mm
Packaging: Bulk
Application:
The tip has been hardened to be used with high torque power tools. The shank
is hexagon shaped to be clamped in a 3 jaw chuck or in a bit holder.
The shank is compatible with the following bit holders:
-
T 938001 – Magnetic screwdriver bit holder.
-
TZ AC23 – Magnetic screw guide and extension.
-
TCFS200 – Flexible shaft bit holder.
-
T AD14014C – 1/4′ socket adaptor.
-
T BH54C – Magnetic bit holder and extension 54mm (carded).
-
T MBH54B – Magnetic bit holder and extension 54mm (Bulk).
-
T BH75C – Magnetic bit holder and extension 75mm (carded).
-
T MBH75B – Magnetic bit holder and extension 75mm (bulk).
Bulk sizes available:
25mm:
#0 – 25mm –
T SQ0025B
#1 – 25mm –
T SQ0125B
#2 – 25mm –
T SQ0225B
#3 – 25mm –
T SQ0325B
50mm:
#0 – 50mm –
T SQ0050B
#1 – 50mm –
T SQ0150B
#2 – 50mm –
T SQ0250B
#3 – 50mm –
T SQ0350B
150mm:
#1 – 150mm –
T SQ01150B
#2 – 150mm –
T SQ02150B
#3 – 150mm –
T SQ03150B
IMPORTANT:
When using a portable electric drill. Make sure the drill has a safety clutch to
prevent injury.
-
R7,00
Length: 10m
Width: 19mm
Thickness: 0.075mm (±0.015mm)
Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy
to wind around pipe threads.
Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread
lubricant to seal the joint without making it more difficult to tighten.
Typically the tape is wound around the pipe/fitting’s thread three times before it is screwed into place.
Application:
- Plumbing for sealing pipe threads.
- Sealing air compression equipment.
- Lubricates threads, and allows deep seating of the threads, and it aid threads from seizing when being tightened
or loosened.
- Contractor
- Manufacturing
- Workshop
- DIY
-
R6,00
AirCraft Closing Plug PU 4mm
At a Glance: Push-in blanking plug to seal unused 4mm PU tube ports
The AirCraft SG APP04 Closing Plug PU 4mm is the simple, essential little part that stops small leaks from becoming big frustrations. It’s designed to blank off unused push-in pneumatic ports that accept 4mm polyurethane (PU) tubing—perfect for manifolds, distribution blocks, spare outlets and temporary line changes. Push it in, seal the port, and keep your compressed air system tidy and efficient.
Quick blanking solution for clean, leak-resistant pneumatic setups
Closing plugs are ideal when your pneumatic layout changes over time or when equipment has optional ports you’re not using. The SG APP04 gives you a fast way to close a 4mm push-fit opening without redesigning the whole setup.
-
R6,00
Tork Craft Polisher Bearing Holder For POL06 (POL06-28)
At a Glance: Genuine bearing holder for the Tork Craft POL06 polisher
The Tork Craft polisher bearing holder (Cat No. POL06-28) is a genuine replacement spare designed specifically for the Tork Craft POL06 polisher.
This component supports and locates the bearing in the correct position inside the housing, helping to keep the rotating assembly aligned and running smoothly.
If the original holder is cracked, worn or damaged, the bearing can move out of line, causing noise, vibration and premature wear.
Swapping in this original bearing holder restores proper support, helping your POL06 perform reliably on stainless steel, tube and general metal polishing work.
Standout feature: Purpose-made support for the POL06 bearing
As part of the official Tork Craft spare parts range, this bearing holder is matched to the POL06 housing, bearing and shaft.
It helps maintain accurate alignment under load, protecting both the bearing and the rest of the drive system.
-
R6,00
Tork Craft Polisher Self-lock Pin For POL06 (POL06-17)
At a Glance: Genuine self-lock pin for the Tork Craft POL06 polisher
The Tork Craft polisher self-lock pin (Cat No. POL06-17) is a genuine replacement spare designed specifically for the Tork Craft POL06 polisher.
This pin forms a key part of the self-locking mechanism, allowing you to lock the spindle or polishing head securely when changing accessories or making adjustments.
If the original pin is worn, bent, missing or no longer engaging positively, this replacement helps restore safe, reliable locking and improves the overall handling of your POL06.
Standout feature: Genuine POL06 self-lock pin for positive spindle locking
Engineered as part of the original Tork Craft spare parts range, this self-lock pin is matched to the POL06 mechanism for the correct length, diameter and tip profile,
ensuring smooth engagement with the mating components and a confident “click†when the lock is applied.
-
R6,00
Tork Craft Polisher Self Locking Pin Spring For POL06 (POL06-16)
At a Glance: Genuine self locking pin spring for the Tork Craft POL06 polisher
The Tork Craft polisher self locking pin spring (Cat No. POL06-16) is a genuine replacement spare designed for the Tork Craft POL06 polisher.
This spring provides the tension that allows the locking pin mechanism to engage and disengage correctly, helping you to lock or release the polishing head when required.
Over time, springs can fatigue, stretch or lose tension, which makes the locking action feel soft or unreliable.
Replacing a tired spring with this original POL06-16 part restores a positive click and dependable locking performance, keeping your machine safe and convenient to use.
Standout feature: Purpose-made spring for the POL06 self locking pin mechanism
As part of the official Tork Craft spare parts range, this compact spring is matched to the POL06’s locking system,
delivering the specific tension and travel needed for smooth, repeatable operation whenever you lock or release the polisher head.
-
R6,00
Tork Craft Polisher Split Washer For POL06 (POL06-15)
At a Glance: Genuine split washer for securing components on the POL06 polisher shaft
The Tork Craft polisher split washer (Cat No. POL06-15) is a genuine replacement spare designed specifically for the Tork Craft POL06 polisher.
This small but essential part helps to secure rotating components on the shaft, preventing unwanted movement that can lead to noise, vibration or premature wear.
If the original washer has been lost, damaged or distorted during servicing, this replacement restores correct clamping and contributes to smooth, reliable operation of the polisher.
Standout feature: Genuine POL06 split washer for secure shaft retention
Purpose-made to match the original washer supplied with the POL06 polisher, this split washer delivers the correct fit and spring tension required
to keep gears, bearings or collars located where they should be inside the machine.
-
R6,00
Tork Craft Polisher Self-Lock Pin For POL05
At a Glance; Spindle lock pin for safe, positive pad locking on the Tork Craft POL05 polisher.
Make pad changes on your Tork Craft POL05 quick, safe and controlled again with this genuine self-lock pin.
The pin is the heart of the spindle lock mechanism – when you press the button, the pin moves into the gear, locking the spindle so you can loosen or tighten the backing pad properly.
After long service, the original pin can wear, round off or become damaged, leading to a lock that feels vague, slips under load or fails to engage cleanly.
The POL05-19 replacement lock pin restores a crisp, positive bite into the matching gear, helping you lock the spindle securely without resorting to risky improvised methods when changing pads and accessories.
-
R6,00
Tork Craft Polisher Self-Locking Pin Spring For POL05
At a Glance; Replacement self-locking pin spring for the spindle lock mechanism on the Tork Craft POL05 polisher.
Keep backing pad changes on your Tork Craft POL05 safe and predictable with this genuine self-locking pin spring.
The spring is the small but vital component that pushes the spindle lock pin back out of the gear after you release the lock, ensuring the pad can spin freely once again.
With time and heavy use, the original spring can weaken, lose tension or become damaged, leaving the lock slow to release or unreliable in operation.
Fitting the POL05-18 spring restores the correct return force on the lock pin so the spindle locks positively when you need it – and releases cleanly when you are ready to get back to polishing.
