Showing 4465–4480 of 4681 resultsSorted by latest
-
R6,00
Tork Craft Polisher Split Washer For POL05
At a Glance; Locking split washer for securing key fasteners on the Tork Craft POL05 polisher.
The small parts often do the biggest jobs. The Tork Craft POL05-17 split washer is a compact locking washer used in the POL05 polisher to help keep important screws or nuts tight under vibration and load.
Fitted in the correct position, it provides extra spring tension against the fastener head, reducing the chance of things working loose while you are cutting or polishing.
On a hard-working machine, years of use, heat and repeated tightening can flatten or fatigue the original washer.
Replacing it with this genuine split washer restores proper clamping force and helps protect the surrounding components in the gearbox or housing from movement and wear.
-
R6,00
GASKET FOR SG LVLP SPRAY GUN
-
R6,00
GASKET FOR SG LVLP SPRAY GUN
-
R6,00
Tork Craft Double Ear Clamp C/steel 9-12mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit – one clamp
-
R6,00
Tork Craft Double Ear Clamp C/steel 11-13mm (10pc Per Box)
Features:
Double ear clamps are a simple, economical solution for many
difficult tightening or sealing problems. The design allows for quick and easy
installation. When the clamp is in place, either side is squeezed tight with
pincers. One major benefit is that there is no grabbing from the clamps when
being used in industries where the hose is being dragged a lot.
Kindly note that the price is per one unit – one clamp
-
R6,00
Tork Craft Allen Key For AC26 Screw Pilot
At a Glance; Replacement hex key for TZ-AC26 screw pilot/countersink set
The Tork Craft Allen Key For AC26 Screw Pilot is the small but essential accessory that keeps your TZ-AC26
screw pilot/countersink set working properly. This hex key is used to loosen and tighten the grub screws that
hold the pilot drills and countersink bodies in place, allowing you to adjust drill length or replace worn bits
quickly. Keep a spare in your toolbox so your pilot and countersink set is always ready for the next job.
Standout feature – dedicated Allen key for TZ-AC26 screw pilot/countersink set
Designed to suit the TZ-AC26 screw pilot set, this Allen key fits the grub screws correctly so you can make
secure adjustments without damaging the screw heads. It is a simple, robust tool that helps extend the life of
your screw pilot bits and keeps your countersinks performing at their best.
-
R5,00
Length: 10m
Width: 12mm
Thickness: 0.075mm (±0.015mm)
Thread seal tape is a film tape commonly used in sealing pipe threads. The tape is wound on a spool, making it easy
to wind around pipe threads.
Using thread seal tape prevents threads from seizing should it need to be unscrewed. The tape also works as a thread
lubricant to seal the joint without making it more difficult to tighten.
Typically the tape is wound around the pipe/fitting’s thread three times before it is screwed into place.
Application:
- Plumbing for sealing pipe threads.
- Sealing air compression equipment.
- Lubricates threads, and allows deep seating of the threads, and it aid threads from seizing when being tightened
or loosened.
- Contractor
- Manufacturing
- Workshop
- DIY
-
R5,00
Grit: 180
Diameter: 125mm
<!-- ![]()
-->
This 125mm sanding disc is designed for efficient material removal and surface preparation. Featuring an 180 grit,
it provides a medium-fine finish, ideal for smoothing wood, removing light imperfections, or preparing surfaces for
painting. The no-hole design is perfect for sanders without dust extraction, while the hook and loop backing ensures
quick and easy disc changes, maximizing your workflow. Sold in bulk, this cost-effective solution is a must-have for
any workshop or DIY enthusiast.
Application:
- Woodworking
- Paint Preparation
- Automotive Bodywork
- Metalworking
- General Surface Refinement
- DIY
-
R5,00
Tork Craft Sanding Disc — 125 mm, 120 Grit, No Holes (Bulk, Hook-and-Loop)
Step into fine finishing mode with Tork Craft 125 mm P120 sanding discs. The hook-and-loop backing facilitates instant swaps, and the no-hole design gives full surface contact for consistent removal and smoothing. Supplied in bulk to support high volume sanding in your workshop.
-
R5,00
Tork Craft Sanding Disc — 125 mm, 80 Grit, No Holes (Bulk, Hook-and-Loop)
Turn up the pace on prep work with Tork Craft 125 mm P80 sanding discs. The hook-and-loop backing swaps in
seconds, while the no-hole face gives full-contact cutting for fast stock removal, edge shaping and paint stripping. Supplied in
bulk so busy workshops can keep projects moving without running out.
-
R4,00
Size: 2.5mm
Short side: 17mm
Long side: 86mm
An L-wrench hex key, also known as an Allen key, is a simple yet essential hand tool used to tighten or
loosen bolts and screws with a hexagonal socket head. It’s named for its characteristic ‘L’ shape, which provides
two gripping points for better leverage and control.
Application:
- Used to drive bolts and screws with internal hexagonal (six-sided) sockets and grub screws.
- Manufacturing
- Electronics
- Construction
- DIY
-
R4,00
Tork Craft Drill Pop Riveter Spare E-clip
Replacement E-clip for pop riveter: secure internal mechanism
This spare E-clip is designed specifically for the Tork Craft drill pop riveter (Cat No. TCRIV001-06) to replace worn or lost retaining clips and ensure your tool continues to function properly.
-
R4,00
Size: 2.0mm
Short side: 15mm
Long side: 80mm
An L-wrench hex key, also known as an Allen key, is a simple yet essential hand tool used to tighten or
loosen bolts and screws with a hexagonal socket head. It’s named for its characteristic ‘L’ shape, which provides
two gripping points for better leverage and control.
Application:
- Used to drive bolts and screws with internal hexagonal (six-sided) sockets and grub screws.
- Manufacturing
- Electronics
- Construction
- DIY
-
R4,00
Size: 1.5mm
Short side: 14mm
Long side: 72mm
An L-wrench hex key, also known as an Allen key, is a simple yet essential hand tool used to tighten or
loosen bolts and screws with a hexagonal socket head. It’s named for its characteristic ‘L’ shape, which provides
two gripping points for better leverage and control.
Application:
- Used to drive bolts and screws with internal hexagonal (six-sided) sockets and grub screws.
- Manufacturing
- Electronics
- Construction
- DIY
-
R960,00
• A General Purpose Mild Steel Welding Wire.
• Suitable For Single-Pass And Multi-Pass Welding For Structures Fabricated By Carbon Steel And 500mpa Grade Low Alloy Steel Such As Vehicles, Bridges, Construction And Mechanical Structures.
-
R977,00
• A General Purpose Mild Steel Welding Wire.
• Suitable For Single-Pass And Multi-Pass Welding For Structures Fabricated By Carbon Steel And 500mpa Grade Low Alloy Steel Such As Vehicles, Bridges, Construction And Mechanical Structures.
Renault Turbocharger 
Alfa Micro-V belt - non-stretch (6PK1975)