Showing 449–464 of 4680 resultsSorted by latest

  • Tork Craft Hard Case 417X364X104Mm Od With Foam Blk Water & Dust Proof For Laptop

    Tork Craft Hard Case 417X364X104Mm Od With Foam Blk Water & Dust Proof For Laptop

    R1 485,80
    Water & Dust Proof Hard Case

    HARD CASE 460X350.3X170MM OD WITH FOAM BLACK WATER & DUST PROOF 433015Excellent
    heavy duty, professional equipment case for serious photographers,
    videographers, audio specialists, sportsmen and outdoor enthusiasts. These boxes
    will protect your important gear from hard knocks and collisions. A must-have to
    transport sensitive equipment and instruments.

    • Waterproof, shockproof and dustproof
    • Manual pressure equalization valve-balances interior pressure, keeps
      water out
    • O-ring seal
    • Open cell core with solid wall design – strong, light weight
    • Pre-cut with convoluted lid foam
    • Stainless steel hardware
      Dimensions:(OD)

    • (L) 417mm
    • (W) 364mm
    • (H) 104mm
    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 45 X 55Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 45 X 55Mm Weld Shank 19.05Mm

    R1 473,16

    Annular Cutters 55mm long

    Annular Cutter: Ø 45
    mm

    55mm Annular Cutter (Broach Cutter)One
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular cutters convert a smaller area to chips, requiring less horsepower and
    thrust. This feature provides longer tool life and less chatter. The slug also offers
    a higher scrap value than loose chips and shavings.

    Refer to the picture shown below, explaining why annular cutters are more efficient
    and faster than twist drill bits.

    Differences explained

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Tool Backpack Black With Rubber Base 65 X 20 X 40Cm Tork Craft

    Tork Craft Tool Backpack Black With Rubber Base 65 X 20 X 40Cm Tork Craft

    R1 471,55

    Backpack

    Colour:
    Black

    The backpack is an ideal travel companion to store everyday essentials.

    Features:

    • Lightweight, urban style look.
    • Rigid waterproof base.
    • Shoulder straps.
    • Handle on top.
    • Tork Craft™ company logo.
    Add to cartDone
  • Tork Craft Thread Repair Kit 7Pc M16 X 2.0Mm Internal (Metal Box)

    Tork Craft Thread Repair Kit 7Pc M16 X 2.0Mm Internal (Metal Box)

    R1 468,51
    Thread Repair kit M16 x 2,0mm
    in Metal Case

    Restore stripped threads easily and permanently with Tork Craft thread repair
    kits. Tork Craft application-specific thread repair kits make complex repairs simple
    and are often a recommended solution by automakers.

    Tork Craft inserts are available in thread repair kits and sets for permanently
    repairing tapped holes which have been stripped or damaged due to wear, corrosion,
    and over-torqing. Kits are offered in various thread series. All our kits have a
    quantity of inserts, the proper size drill, high-speed steel Tork Craft tap, and
    installation tool.

    Available in M4, M5, M6, M8, M10 and M12. Replacement inserts are also offered
    for the whole range in different lengths.

     

    Let’s make sense of the numbers:

    Example:

    M4 x 0.7 x 1.0D

    M4: The Metric value of the required thread i.e. Metric 4mm
    0.7:     This is the pitch of the thread
    1.0D:     this is the installed length of the insert after installation.

    Determining the installed length:

    M4 x 1.0D = 4mm deep
    M4 x 1.5D = 6mm deep
    M4 x 2.0D = 8mm deep

    Thus, the depth (length) of the installed insert will be the metric diameter
    of the thread (in this case M4) multiplied by the “D” value.

    Add to cartDone
  • Tork Craft Impact Drill 13Mm 1100W 2 X Speed 1200/3200Rpm 220V Machine

    Tork Craft Impact Drill 13Mm 1100W 2 X Speed 1200/3200Rpm 220V Machine

    R1 466,31

    TorkCraft – Impact Drill 1100W

    Max RPM: 0 – 3200
    Voltage: 220-240 (50Hz)
    Wattage: 1100W

    Application:

    Drilling into various steel, plastic, wood and masonry using

    various drill bits and accessories.

    • Max RPM: Gear 1= 0-1200 & Gear 2= 0-3200
    • Gear 1 Low : 850RPM
    • Gear 1 Medium : 1050RPM
    • Gear 1 Max: 1275RPM
    • Gear 2 Low : 2600RPM
    • Gear 2 Medium : 2900RPM
    • Gear 2 Max: 3200RPM
    • Max Chuck Capacity: 13 mm (Keyed)
    • Drilling Capacity: wood 23mm, Steel 13mm and Masonry 13mm
    • Max Impact Rate: Gear 1 = 0-19200 & Gear 2 = 0-44800 BPM
    • Wattage: 1100W
    • Voltage: 220-240 (50Hz)
    • Modes: Drill & Hammer
    • Variable speed control dial
    • Trigger lock on button

    Accessories Included

    • Impact Drill
    • Chuck key
    • Depth stop rod
    • Auxiliary handle
    Add to cartDone
  • Tork Craft 70Mm 1' Drive 6Pt Impact Socket

    Tork Craft 70Mm 1′ Drive 6Pt Impact Socket

    R1 457,87

    Tork Craft Impact Socket — 70 mm, 1″ Drive, 6-Point (Cat No. TCIM50070)

    Size: 70 mm socket size — Drive: 1″ (25.4 mm) drive

    The Tork Craft 70 mm impact socket features a robust 6-point internal geometry and heavy-duty construction, designed to handle high-torque impact wrenches in automotive, industrial repair and maintenance environments. Its large 1″ drive makes it suitable for demanding applications where greater leverage and durability are required.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 50 X 30Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 50 X 30Mm Weld Shank 19.05Mm

    R1 452,79

    Annular Cutters 30mm

    Annular Cutter: Ø 50
    mm

    ANNULAR HOLE CUTTER HSS 38 X 30MM BROACH SLUGGER BITOne
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular
    cutters convert a smaller area to chips, requiring less horsepower and thrust. This
    feature provides longer tool life and less chatter. The slug also offers a higher
    scrap value than loose chips and shavings.

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Heavy Duty Vice 100Mm

    Tork Craft Heavy Duty Vice 100Mm

    R1 448,75

    Tork Craft Heavy Duty Vice 100 mm – Bench-Mounted Clamping Power

    At a Glance: 100 mm heavy-duty bench vice for everyday workshop use

    The Tork Craft TCV11100 Heavy Duty Vice 100 mm is built to keep your workpiece rock steady while you do the noisy, messy, accurate stuff. Bolt it to your bench and it becomes the third hand you always wish you had – gripping steel, timber, plastic and more while you drill, cut, file, grind or assemble. The robust construction, sturdy jaws and smooth screw action make it a reliable choice for home users, small workshops and busy maintenance teams alike.

    Heavy-duty construction for confident clamping

    This vice forms part of the Tork Craft hand tools range, designed for hard-working environments where tools are expected to last. The solid body, strong jaws and positive screw mechanism help you clamp with confidence, whether you are fabricating metal brackets, cutting threaded rod or holding timber while you fit hardware.

    Add to cartDone
  • Tork Craft Mini Rotary Tool 170W And Accessory Kit 172 Pc In Plastic Case

    Tork Craft Mini Rotary Tool 170W And Accessory Kit 172 Pc In Plastic Case

    R1 447,99

    Tork Craft Mini Rotary Tool — 170 W with 172-Piece Accessory Kit

    The Tork Craft TC08172 Mini Rotary Tool is a versatile 170 W multitool designed for precision tasks such as cutting, engraving, sanding, polishing, grinding and drilling. Supplied with a comprehensive 172-piece accessory kit neatly organised in a durable plastic case, this rotary tool is perfect for DIY enthusiasts, hobbyists, crafters and light workshop use. Its compact size and powerful motor offer excellent control for detailed work on wood, metal, plastic, glass and more.

    Add to cartDone
  • Tork Craft Diamond Blade 300 X 25.4Mm Old Concrete Laser Welded Segmented

    Tork Craft Diamond Blade 300 X 25.4Mm Old Concrete Laser Welded Segmented

    R1 427,71

    Diamond blade



    TYPE:
    Laser weld and segmented

    DIAMETER: ø300mm
    BORE: Ø25.4mm
    MAX RPM: 5,000
    USE: Old concrete

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Step Drill Hss 6-60Mm M2 Carded

    Tork Craft Step Drill Hss 6-60Mm M2 Carded

    R1 424,05

    Tork Craft Step Drill — HSS M2, 6–60 mm

    Packaging: Carded (for display)

    Cover a broad range of hole sizes with one tool. This Tork Craft HSS M2 step drill spans from 6 mm up to 60 mm in progressive steps, giving you fast, clean holes in sheet metal, aluminium, copper, brass and plastic. With high-speed steel construction, designed for prolonged use, it’s ideal for workshops or industrial maintenance where versatility matters.

    Add to cartDone
  • Fixman 19-Pc 1/2' Dr.Sockets & Accessories

    Fixman 19-Pc 1/2′ Dr.Sockets & Accessories

    R1 424,05

    19 Piece 1/2 inch drive Socket Wrench Tray Set

    F1.BT76 1/2 in. Socket Wrench & Accessories tray set (19 pieces)

    Insert for tool our tool cabinets. 1/3 drawer size,
    19 pieces. The set consists of
    1/2 drive sockets, 72 teeth ratchet and Accessories. Made of high-quality chrome vanadium steel Cr-V 50BV30 .

    Manufactured in accordance to DIN 3122, DIN 3123 and DIN 3124 standards.

    See the Specifications TAB for details.

    Add to cartDone
  • Fixman Tray 24 Piece 3/8' Drive Sockets And Accessories

    Fixman Tray 24 Piece 3/8′ Drive Sockets And Accessories

    R1 424,05

    24 Piece 3/8 inch drive Socket Wrench Tray Set

    F1.BT72 3/8 inch Socket Wrench and Accessories tray set (24 pieces)

    Insert for tool our tool cabinets. 1/3 drawer size,
    24 pieces. The set consists of
    3/8 drive sockets, Spark Plug Sockets and accessories. Made of high quality chrome vanadium steel.

    Manufactured in accordance to DIN 3122, DIN 3123 and DIN 3124 standards

    See the Specifications TAB for details.

    Add to cartDone
  • Tork Craft Mechanical Torque Wrench 1/2' X 20-210Nm

    Tork Craft Mechanical Torque Wrench 1/2′ X 20-210Nm

    R1 420,25

    TorkCraft – Mechanical Torque Wrenches

    Application:

    To loosen or tighten screws, bolts and nuts to a desired torque setting.

    • Handle: Aluminium
    • Body: Steel
    • Macro torque scale
    • Direction paddle
    • Micro torque scale
    • Knurled grip Aluminium handle
    • Adjustment locking collar

    Contents

    • Torque wrench
    • Manual

    WARNING: Do not apply torque in excess
    of the maximum capacity
    of the wrench. Apply load on the grip only and do not
    use any handle extension bars for additional leverage.
    Do not disassemble the wrench for any reason. Highly
    stressed internal components may cause severe injury
    when released in an unintended manner.
    The wrench should be re-calibrated periodically. The
    calibration of the wrench should be checked at least
    once a year, after any abnormal handling or
    overloading, or after 5000 cycles.
    Do not leave the wrench in any place exposed to
    excessive heat, humidity, or direct sunlight.

    Add to cartDone
  • Tork Craft Chisel Set Wood Turning 300Mm Hss 5 Piece Wood Case

    Tork Craft Chisel Set Wood Turning 300Mm Hss 5 Piece Wood Case

    R1 392,42

    5 Piece Woodturning Chisel Set

    Description:

    A five-piece woodturning chisel set with ergonomic wooden handles neatly packaged in a wooden box with a hinged lid.
    The blades
    are manufactured from High Speed Steel (HSS).

    Contents:

    ⅜’ (9.53mm) x ⅜” (9.53mm) Spindle gouge

    3/16′ (4.78mm)x ½’ (12.70mm) Spear/diamond scraper

    ⅛’ (3.18mm) x ½’ (12.70mm) Parting tool

    3/16′ (4.78mm) x ½’ (12.70mm) x 80mm skew chisel

    3/16′ (4.78mm) x ½’ (12.70mm) x 80mm Round nose scraper

    Range of Application

    For woodturning of hardwood and softwood on a woodturning lathe

    Add to cartDone
  • Tork Craft Ear Plug Refill Pack 500 Pairs For Tcepd250 And Tcepd500

    Tork Craft Ear Plug Refill Pack 500 Pairs For Tcepd250 And Tcepd500

    R1 378,31

    Tork Craft Ear Plug Refill Pack — 500 Pairs (For Dispensers TCEPD250 & TCEPD500)

    Contents: 500 pairs of yellow bullet-shape foam ear plugs

    This Tork Craft refill pack supplies 500 pairs of yellow bullet-shape foam ear plugs to restock your hearing-protection dispensers (compatible with models TCEPD250 and TCEPD500). Designed for high-traffic sites, workshops or any environment where hearing protection is accessed frequently, this refill pack ensures continuity of supply and cost-effective stock management.

    Add to cartDone

Powered by