Showing 513–528 of 4680 resultsSorted by latest

  • Aircraft Airbrush Kit 0.2Mm

    Aircraft Airbrush Kit 0.2Mm

    R1 126,56

    AirCraft Airbrush Kit 0.2mm (SG A208)

    At a Glance: Ultra-fine 0.2mm airbrush for crisp detail lines, tight control and smooth, delicate shading.

    For the jobs where “close enough” isn’t close enough, the AirCraft SG A208 Airbrush Kit (0.2mm) steps in with precision-control spraying built for detail. A 0.2mm nozzle size is all about finesse—fine lines, subtle gradients, tight areas and delicate finishes on models, crafts and intricate touch-ups. When paired with properly thinned paint and a clean air supply, the SG A208 delivers smooth atomisation and controlled paint delivery so you can build colour gradually and keep your work sharp, neat and professional-looking.

    Ultra-Fine Precision: a 0.2mm airbrush kit made for detail work and clean control

    Smaller nozzles produce finer spray patterns, making them perfect for detailed shading and fine-line work. The trade-off is they demand cleaner paint, better thinning and a bit more cleaning discipline—so when you want top-tier detail, this is the tool that rewards you.

    Add to cartDone
  • Tork Craft Hammer Club Copper 900G Fibreglass Handle

    Tork Craft Hammer Club Copper 900G Fibreglass Handle

    R1 124,90


    Club Hammer – Copper

    Head: Copper
    Handle: Fibreglass
    Head Weight: 900g

    Copper hammers are specialized tools designed for use in environments where sparks could pose a risk, such as
    mining, petrochemical industries, and oil and gas operations. Unlike traditional steel hammers, copper hammers are
    constructed with a copper head, which is known for its non-sparking properties.

    Application:

    • Lighter hitting in a non-sparking environment.
    • Construction
    • Automotive
    • DIY
    Add to cartDone
  • Aircraft Sandblaster / Etcher / Eraser Kit Mini

    Aircraft Sandblaster / Etcher / Eraser Kit Mini

    R1 121,62

    AirCraft Sandblaster / Etcher / Eraser Kit Mini (SG A178)

    At a Glance: Mini air eraser-style sandblaster with a ø 0.5mm nozzle for fine etching and precision cleaning.

    Meet the small tool that punches way above its weight. The AirCraft SG A178 Sandblaster / Etcher / Eraser Kit Mini is a precision “air eraser” style sandblaster built for detail work—think glass etching with stencils, cleaning jewellery, and blasting grime off small, intricate parts where a full-size blaster would be overkill. With its fine ø 0.5mm nozzle and gravity-feed cup, it gives you controlled, accurate abrasion so you can clean, etch and prep without turning the job into a sandstorm.

    Precision Micro-Blasting Control: a compact kit made for detail etching and fine-part cleaning

    The SG A178 is designed for careful work—tight blast pattern, manageable media use, and a comfortable setup for short runs and touch-ups. Pair it with very fine blasting media and you’ve got a neat, controllable system for delicate surfaces and small components.

    Add to cartDone
  • Tork Craft Holesaw Set 13Pc In Case Bi-Metal

    Tork Craft Holesaw Set 13Pc In Case Bi-Metal

    R1 119,62

    13 Pc Bi-metal hole saw set

    Included in the set:

    Bi-metal hole saws:

    (x1) Ø19mm
    (x1) Ø22mm
    (x1) Ø29mm
    (x1) Ø35mm
    (x1) Ø38mm
    (x1) Ø44mm
    (x1) Ø54mm
    (x1) Ø57mm
    (x1) Ø64mm

    Adaptors:

    (x1) HSS adaptor Ø16-35mm
    (x1) 7/16′ Hex HSS adaptor ø38-64mm
    (x1) Hex key for replacing pilot drill bit

    INFO:
    The set includes a storage case for transport.

    Application:

    The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
    steel) manufactured teeth.

    The teeth have been set to a variable pitch to
    improve harmonic vibration and to have a better chip clearance.

    The hole saw can be used to cut into:

    • Aluminium
    • Copper
    • Mild steel (sheet metal)
    • Stainless steel (sheet metal)
    • Zinc
    • Wood
    • Drywall (plaster board)
    • PVC

    The Bi-metal hole saws are primarily used by electricians, plumbers,
    machinists and carpenters.

    Features:

    • Low vibration and even cut due to the variable pitched teeth.
    • Strong electron beam welded cup design with a tough alloy body for added
      durability.
    • Knock out hole for plug removal.
    • Depth of cut: 38mm
    • Long life – when used properly within the correct rpm and using a
      lubricant when cutting into metals.

    Lubricant tip:
    Use paraffin or beeswax when cutting into aluminium. Use
    CT-90     or a general-purpose lubricating oil when cutting into steel.

    Add to cartDone
  • Aircraft Air Tire Buffer For Roughing Low Areas. Recapping And Tire Scuffing

    Aircraft Air Tire Buffer For Roughing Low Areas. Recapping And Tire Scuffing

    R1 117,44

    AirCraft Air Tire Buffer For Roughing Low Areas, Recapping And Tire Scuffing (AT0022)

    At a Glance: Pneumatic tyre buffer designed for controlled roughing, scuffing and surface preparation—ideal for recapping, patch work and adhesion prep.

    Tyre repair and recapping work lives or dies on surface preparation. If the rubber isn’t keyed properly, bonding suffers—and the job won’t last. The AirCraft AT0022 Air Tire Buffer is built for the real-world grind: roughing low areas, scuffing tyre surfaces, and prepping for recapping or patching where a consistent, controlled texture is essential.
    Powered by compressed air, the AT0022 gives you steady speed and predictable handling for workshop use. It’s ideal for tyre shops, fleet maintenance, and repair bays that need a dependable buffer for rubber preparation without fighting inconsistent power or awkward tool control.

    Purpose-built pneumatic buffer for professional tyre prep

    Designed for rubber roughing and scuffing tasks, the AT0022 helps create the correct surface profile for adhesives and bonding—supporting stronger repairs and more reliable recapping preparation.

    Add to cartDone
  • Tork Craft Battery Charger 20V 4.5A Dual Port 220V

    Tork Craft Battery Charger 20V 4.5A Dual Port 220V

    R1 110,55


    Battery Charger – Dual Port

    Voltage: 20V DC
    Input Voltage: 100 – 240V ~ 50 – 60Hz
    Output Voltage: 20V DC- 4.5A (x2)

    This Tork Craft Battery Charger is a device designed to charge 20V batteries for cordless power tools. It features
    two charging ports, allowing you to charge two batteries simultaneously. The charger is compatible with 220V power
    outlets, making it suitable for use in various regions.

    Application:

    • Compatible with all Tork Craft 20V Cordless tool batteries
    Add to cartDone
  • Tork Craft Socket 75Mm 1' Drive Crv Hex

    Tork Craft Socket 75Mm 1′ Drive Crv Hex

    R1 109,22

    Tork Craft Socket — 75 mm × 1″ Drive

    Socket Size: 75 mm — 1″ (25.4 mm) Drive

    The Tork Craft 75 mm socket, designed for 1″ drive tools, features a chrome-vanadium construction and 6-point hex configuration for optimal grip on large fasteners. Built for professional use, it fits heavy-duty applications in automotive, industrial and service environments where torque is high and reliability is essential.

    Add to cartDone
  • Tork Craft Nibbler Attach. Set 3-In-1 For Drill Machines

    Tork Craft Nibbler Attach. Set 3-In-1 For Drill Machines

    R1 107,46

    Tork Craft Nibbler Attachment Set — 3-in-1 for Drill Machines (TC10016)

    Packaging: Boxed set (sold as each)

    Turn your drill into a capable sheet-metal cutting tool. The TC10016 3-in-1 nibbler attachment set provides controlled nibbling action for straight lines, gentle curves and pattern work on thin-to-medium gauge metals. Ideal for installers, fabricators and workshop users who need clean edges with minimal burr and distortion.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 45 X 30Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 45 X 30Mm Weld Shank 19.05Mm

    R1 107,18

    Annular Cutters 30mm

    Annular Cutter: Ø 45
    mm

    ANNULAR HOLE CUTTER HSS 38 X 30MM BROACH SLUGGER BITOne
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular
    cutters convert a smaller area to chips, requiring less horsepower and thrust. This
    feature provides longer tool life and less chatter. The slug also offers a higher
    scrap value than loose chips and shavings.

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Tool Holder Mt2 - 3/4' Weldon Shank

    Tork Craft Tool Holder Mt2 – 3/4′ Weldon Shank

    R1 101,53

    Morse Taper to Weldon adaptor

    MT2 to Weldon Adaptor

    Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank

    TOOL HOLDER MT2 - 3/4" WELDON SHANK 

     

    What is a Weldon Shank?
    Weldon ShankThe term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat

    Add to cartDone
  • Tork Craft Slogging Spanner 65Mm Open End Crv

    Tork Craft Slogging Spanner 65Mm Open End Crv

    R1 096,11

    Slogging spanner 65mm open end

    The Slogging Spanner is a versatile and heavy-duty tool designed for industrial and mechanical applications where high torque is required. This robust spanner is built to handle demanding tasks and is an essential tool for professional mechanics, construction workers, and maintenance technicians.

    The spanner is crafted from 31CrV (Chrome Vanadium) and ensures durability and longevity, making it suitable for tough working conditions and repetitive tasks.

    The unique feature of the Slogging Spanner is its large and thick profile, which allows for increased torque application. This design enables you to apply significant force to tighten or loosen bolts and nuts, making it ideal for heavy-duty applications where conventional wrenches may not be sufficient.

    The Slogging Spanner comes in a variety of sizes from 24mm – 85mm to accommodate different bolt and nut dimensions. It is important to select the appropriate size for the specific task to ensure a proper fit and optimal performance.

    Add to cartDone
  • Tork Craft Diamond Blade Seg.300X25.4 Metal Cutting

    Tork Craft Diamond Blade Seg.300X25.4 Metal Cutting

    R1 092,36

    Diamond blade for metal cutting



    TYPE:
    Laser weld and segmented

    DIAMETER: ø300mm
    BORE: Ø25.4mm
    MAX RPM: 5,100
    USE: Metal cutting

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Thread Repair Kit 7Pc M14 X 2.0Mm Internal (Metal Box)

    Tork Craft Thread Repair Kit 7Pc M14 X 2.0Mm Internal (Metal Box)

    R1 087,89
    Thread Repair kit M14 x 2,0mm
    in Metal Case

    Restore stripped threads easily and permanently with Tork Craft thread repair
    kits. Tork Craft application-specific thread repair kits make complex repairs simple
    and are often a recommended solution by automakers.

    Tork Craft inserts are available in thread repair kits and sets for permanently
    repairing tapped holes which have been stripped or damaged due to wear, corrosion,
    and over-torqing. Kits are offered in various thread series. All our kits have a
    quantity of inserts, the proper size drill, high-speed steel Tork Craft tap, and
    installation tool.

    Available in M4, M5, M6, M8, M10 and M12. Replacement inserts are also offered
    for the whole range in different lengths.

     

    Let’s make sense of the numbers:

    Example:

    M4 x 0.7 x 1.0D

    M4: The Metric value of the required thread i.e. Metric 4mm
    0.7:     This is the pitch of the thread
    1.0D:     this is the installed length of the insert after installation.

    Determining the installed length:

    M4 x 1.0D = 4mm deep
    M4 x 1.5D = 6mm deep
    M4 x 2.0D = 8mm deep

    Thus, the depth (length) of the installed insert will be the metric diameter
    of the thread (in this case M4) multiplied by the “D” value.

    Add to cartDone
  • Tork Craft Hard Case 260X230X185Mm Od With Foam Black Water & Dust Proof (221614)

    Tork Craft Hard Case 260X230X185Mm Od With Foam Black Water & Dust Proof (221614)

    R1 087,75

    Water & Dust Proof Hard Case

    HARD CASE 260X230X185MM OD WITH FOAM BLACK WATER & DUST PROOF (221614)Excellent
    heavy duty, professional equipment case for serious photographers, videographers,
    audio specialists, sportsmen and outdoor enthusiasts. These boxes will protect your
    important gear from the elements. A must-have to transport sensitive equipment and
    instrumentation.

    • Waterproof, crush-proof and dust-proof 
    • Easy open double throw latches 
    • Overlapping interlocking lid eliminates any distorting, mismatching and
      contributes to an overall sturdier case
    • Molded-in padlock holes
    • With foam.
    Dimensions:

    260mm x 230mm x 185mm (OD)

    Add to cartDone
  • Aircraft Spray Gun Mini Type 0.8Mm W/Plastic Cup 125Cc Touch Up

    Aircraft Spray Gun Mini Type 0.8Mm W/Plastic Cup 125Cc Touch Up

    R1 073,98
    LVMP gravity feed touch up spray gun – 0.8mm

    The professional touch up spray gun features the LVMP technology that has an improved transfer efficiency compared to conventional spray guns. It is also a ‘fast’ spray gun, which means that it needs to be moved/handled faster.

    Ideal for spraying large quantities of material.

    LVMP – Low Volume Medium Pressure

    Add to cartDone
  • Tork Craft Drill Hss 13.0Mm 135Deg 5 Pack Industrial Bit

    Tork Craft Drill Hss 13.0Mm 135Deg 5 Pack Industrial Bit

    R1 068,47

    HSS industrial drill bit


    Drill diameter:     Ø13.0mm
    Packaging: Packet of 5
    Point: 135° split point
    Drill bit: HSS (Hi-speed steel)

    Application:

    The drill bit is made from HSS (hi-speed steel) and is precision fully ground
    at 135° with a split point. The drill bit can be used to drill materials such
    as iron, steel, non-ferrous metals and plastics.

    Advantages:

    Standard HSS 118° angle point drill bits are designed as an all purpose drill
    bit and it will cut most materials.

    Industrial HSS 135° angle point drill bits are designed to cut metal. The
    split point adds 2 extra cutting edges with the adantage of reducing the amount
    of pressure required to perform the cut.

    Sharpening:

    The drill bits are re-sharpenable several times. We recommend the following
    machines as it will sharpen 135° HSS  split point drill bits with ease:

    Add to cartDone

Powered by