Showing 545–560 of 4680 resultsSorted by latest

  • Aircraft Air Hose Reel 9M 12Mm Od X 8Mm Id Pu Hose Auto Retract

    Aircraft Air Hose Reel 9M 12Mm Od X 8Mm Id Pu Hose Auto Retract

    R997,50


    Auto Retract Air Hose Reel

    Length: 9m

    An auto-retract air hose reel is a device designed to store and dispense compressed air hoses efficiently and
    safely. It consists of a spring-loaded reel mounted on a base, a length of air hose attached to the reel, and a hose
    guide or swivel to control the hose’s movement.

    Application:

    • Air hose reels provide air supply from the compressor to the desired tool.
    • The hose reel is designed to be pulled to the desired length from the reel and can be retracted to be stored.
    • To provide a safer and more efficient pneumatic application solution.
    • Manufacturing
    • Workshop
    • DIY
    Add to cartDone
  • Tork Craft Extension Bar 1' Drive 400Mm

    Tork Craft Extension Bar 1′ Drive 400Mm

    R993,08

    Tork Craft Extension Bar — 400 mm × 1″ Drive

    Extension Size: 400 mm (≈ 16″) Length — 1″ (25.4 mm) Drive

    The Tork Craft 400 mm (approx. 16″) Extension Bar with a full 1″ drive is engineered for serious service-work where depth, clearance and large fasteners combine. Built for industrial maintenance, heavy-vehicle repair and structural applications, this tool gives you extended reach while maintaining strength and performance of your 1″ drive system.

    Add to cartDone
  • Tork Craft Blade Tct Noise Free 254X48T 30/1/20/16

    Tork Craft Blade Tct Noise Free 254X48T 30/1/20/16

    R992,99

    Tork Craft Blade TCT Noise Free 254 mm × 48T – 30/20/16 mm Bore

    Highlights: 254 mm diameter × 48 carbide-tipped teeth, compatible with 30/20/16 mm bore arbors, engineered for low-noise performance

    The Tork Craft Blade TCT Noise Free 254 × 48T (30/20/16 mm) is specifically crafted for applications where quieter cutting, reduced vibration and refined finish matter. Its dense 48-tooth configuration delivers smooth, consistent cuts through wood, sheet goods and composite materials while minimising noise and chip-out.

    Featuring the rugged durability of tungsten-carbide-tipped (TCT) teeth and a versatile dual-bore configuration (30/20/16 mm), this blade easily fits a wide range of saw setups. Ideal for interior work, cabinet-making, joinery or settings where acoustic comfort and precision are as important as performance.

    Add to cartDone
  • Tork Craft Hard Case 310X275X155Mm Od With Foam Black Water & Dust Proof (272012)

    Tork Craft Hard Case 310X275X155Mm Od With Foam Black Water & Dust Proof (272012)

    R988,95

    Water & Dust Proof Hard Case

    Tork Craft safety and transport cases withstand the most extreme weather conditions
    and fluctuating temperatures. The robust hinges offer maximum security while rubberized
    handles provides comfortable wear. The special air supply and exhaust valves ensure
    adequate ventilation of, in the supplied Super-foam embedded, transported goods.

    HARD CASE (19208)Excellent
    heavy duty, professional equipment case for serious photographers, videographers,
    audio specialists, sportsmen and outdoor enthusiasts. These boxes will protect your
    important gear from the elements. A must-have to transport sensitive equipment and
    instrumentation.

    Its vital stats:

    • Volume of 7 litres
    • Dimensions of 310 x 275 x 155 mm
    • Ultra-light (1.83 kg),
    • Waterproof and buoyant up to 4.2 kg.

    Features:

    • Waterproof, crush-proof and dust-proof
    • Easy open double throw latches
    • Overlapping interlocking lid eliminates any distorting, mismatching and
      contributes to an overall sturdier case
    • Molded-in padlock holes
    • With foam.
    Add to cartDone
  • Tork Craft Storage Rack 6 Level For Wood And More 45Kg Max Per Level

    Tork Craft Storage Rack 6 Level For Wood And More 45Kg Max Per Level

    R987,43

    Tork Craft 6-Level Storage Rack TCWRA006

    At a Glance: 6-level industrial-grade storage rack with 45 kg per level capacity — ideal for workshop, timber or material storage

    The Tork Craft TCWRA006 Storage Rack is a robust, six-tier shelving unit designed to organise lumber, stock materials, tools, hardware or general workshop items efficiently. Each shelf supports up to 45 kg, making it a reliable shelving solution for timber off-cuts, power tools, supplies and other medium-weight materials common in workshops or garages. Its vertical design helps you maximise storage space while keeping materials accessible and organised, helping maintain a tidy and efficient workspace.

    Standout feature – High-capacity 6-shelf rack for workshop storage and material organisation

    This rack combines load capacity with compact vertical storage, giving you six levels of storage in a small footprint — perfect for busy workshops, garages or stock rooms. Its durability and generous weight rating make it particularly suited for storing wood, hardware, supplies and tools safely and neatly.

    Add to cartDone
  • Tork Craft Diamond Core Bit 78 X 170Mm Universal Purpose M22

    Tork Craft Diamond Core Bit 78 X 170Mm Universal Purpose M22

    R986,10

    Dry Cut Diamond Core Drill

    For plumbers, electricians or general contractors needing to
    drill a hole quickly and cleanly in concrete/brickwork for an installation.


    Core diameter:     Ø78mm
    Depth: 170mm
    Adaptor thread: M22
    Main use: Universal

    Application:

    The dry cut diamond core drill is designed to be used without water to drill
    into:

    • Concrete
    • Concrete pipes
    • Brickwork
    • Roof tiles
    • Slate
    • Stone
    • Paving
    • Tarmac

    It allows the user to drill neat and clean holes quickly without the setup an cleanup time associated with using a water-cooled drilling jig.

     

    INFORMATION:
    Have a look at the different adaptors under the EXTRA INFO tab and the complete
    range under the ACCESSORIES tab.

    IMPORTANT:
    Not for reinforced drilling! Use a wall scanner to detect reinforcing, water
    pipes or electrical conduit.

    Add to cartDone
  • Tork Craft Dia. Blade 300X12X25.4Mm Gen. Purp. Hot Pressed Segmented

    Tork Craft Dia. Blade 300X12X25.4Mm Gen. Purp. Hot Pressed Segmented

    R982,30

    Diamond blade



    TYPE:
    Hot pressed, long life and segmented.

    DIAMETER: ø300mm
    BORE: Ø25.4mm
    MAX RPM: 5,000
    USE: Brick, concrete, cement block, granite, fiber cement,
    stone and other masonry

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Diamond Blade 300 X 25.4Mm Green / New Concrete Hot Pressed Segmented

    Tork Craft Diamond Blade 300 X 25.4Mm Green / New Concrete Hot Pressed Segmented

    R981,68

    Tork Craft Diamond Blade — 300 × 25.4 mm Hot-Pressed Segmented (New Concrete)

    Size: 300 mm diameter [Bore: 25.4 mm]

    This high-capacity 300 mm diameter diamond blade from Tork Craft features a hot-pressed, segmented rim engineered for efficient cutting through new concrete. With its 25.4 mm bore and robust construction, it’s built for demanding site work where depth and durability matter.

    Note: Performs great with new concrete surfaces

    Add to cartDone
  • Tork Craft Torch Led Alum. 500Lm Blk Use 2 X Cr123A Or 1 X 18650 Batteries Flash

    Tork Craft Torch Led Alum. 500Lm Blk Use 2 X Cr123A Or 1 X 18650 Batteries Flash

    R970,85

    Tork Craft Torch LED Aluminium — 500 Lm (2 × CR123A or 1 × 18650 Battery)

    Body: Aluminium housing, black finish

    This Tork Craft LED torch delivers up to 500 lumens of brightness and features a robust aluminium body with a black finish. It supports two CR123A lithium batteries or one 18650 rechargeable battery for flexible power options, making it suitable for trade, outdoor, inspection and job-site lighting tasks.

    Add to cartDone
  • Tork Craft Diamond Blade 300 X 25.4Mm Segmented

    Tork Craft Diamond Blade 300 X 25.4Mm Segmented

    R970,85

    Diamond blade



    TYPE:
    Hot press and segmented.

    DIAMETER: ø300mm
    BORE: Ø25.4mm
    MAX RPM: 6,400
    USE: Brick, concrete, cement block, granite, fiber cement,
    stone and other masonry

    What is a diamond blade?

    A diamond blade is composed of a circular steel core and the diamond
    impregnated segments. The segments are seperated by slots in the core.

    These
    slots assist in cooling the blade during operation by allowing water (wet
    cutting) or air (dry cutting) to flow between the segments. The segments or rims
    are a mixture of diamond powder and metal powders. The diamonds are industrial
    diamonds of different sizes and qualities depending on the material to be cut as
    well a the blade type.

    How does a diamond blade work?

    The individual diamond crystals exposed on the leading edge and the sides of
    the segment or rim carry out the cutting. The operator pushes the rotating blade
    into the material and the surface diamonds thus exposed mill a groove in the
    material. When the blade mills the material, the latter exerts wear on the
    blade. During cutting the exposed diamonds may crack
    or break. The material simultaneously starts to abrade the metal matrix, which
    releases more diamonds.

    The more abrasive the material, the more rapid
    the tendency to wear down the matrix. Blades for cutting hard, denseless
    abrasive materials (such as tile, bricks, stone or cured concrete), require
    a softer metal matrix.

    This will wear down faster, replacing the worn diamonds
    fairly quickly so that the blade continues to cut.

    Blades for cutting soft,
    abrasive materials (such as green concrete and asphalt), must have  a hard,
    abrasion-resistant metal matrix in order to retain the diamonds for a longer
    time.

    Water will prevent the blade from overheating:

    It will greatly reduce the amount of harmful dust created by cutting. Remove the
    slurry from the cut, and extend the life of the blade.

    Add to cartDone
  • Tork Craft Tool Holder Mt3 - 3/4' Weldon Shank

    Tork Craft Tool Holder Mt3 – 3/4′ Weldon Shank

    R965,30

    Morse Taper to Weldon adaptor

    MT3 to Weldon Adaptor

    Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank

    TOOL HOLDER MT3 - 3/4" WELDON SHANK

     

    What is a Weldon Shank?
    Weldon ShankThe term comes from the Weldomn Tool Company. The Weldon shank was the first straight shank with a locking drive flat

    Add to cartDone
  • Tork Craft Drill Hss 12.5Mm 135Deg 5 Pack Industrial Bit

    Tork Craft Drill Hss 12.5Mm 135Deg 5 Pack Industrial Bit

    R962,49

    HSS industrial drill bit


    Drill diameter:     Ø12.5mm
    Packaging: Packet of 5
    Point: 135° split point
    Drill bit: HSS (Hi-speed steel)

    Application:

    The drill bit is made from HSS (hi-speed steel) and is precision fully ground
    at 135° with a split point. The drill bit can be used to drill materials such
    as iron, steel, non-ferrous metals and plastics.

    Advantages:

    Standard HSS 118° angle point drill bits are designed as an all purpose drill
    bit and it will cut most materials.

    Industrial HSS 135° angle point drill bits are designed to cut metal. The
    split point adds 2 extra cutting edges with the adantage of reducing the amount
    of pressure required to perform the cut.

    Sharpening:

    The drill bits are re-sharpenable several times. We recommend the following
    machines as it will sharpen 135° HSS  split point drill bits with ease:

    Add to cartDone
  • Aircraft Spray Gun Hvlp Gravity 1.4Mm S/S Nozzle & Needle With Plastic Cup

    Aircraft Spray Gun Hvlp Gravity 1.4Mm S/S Nozzle & Needle With Plastic Cup

    R957,17
    HVLP spray gun 1.4mm

    The success behind an HVLP spray gun, is the low amount of overspray.

    This is
    achieved by having an improved atomization, by using a lower air pressure and a
    higher volume of airflow.

    Large pattern width, ideal for finishing.

    HVLP – High Volume Low Pressure

     

    Add to cartDone
  • Aircraft Filter In Line 1/2' With Auto Drain Water Trap

    Aircraft Filter In Line 1/2′ With Auto Drain Water Trap

    R979,02
    In-line filter 1/2 BSP

    In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.

    Visible arrows are on the outer body of the casing that indicate the direction of installation to
    correspond with the direction of airflow.

    Drain: Zero pressure drain

    Add to cartDone
  • Aircraft Spray Gun Kit Sg H827 & Sg H2000 Combo With Polished Body Hvlp

    Aircraft Spray Gun Kit Sg H827 & Sg H2000 Combo With Polished Body Hvlp

    R974,27

    2 Piece HVLP Spray Gun Kit

    2 Piece HVLP spray gun kit Contents:

    • 1x SG H827B Spray Gun
    • 1x SG H2000 Spray Gun

    A convenient industrial quality gravity feed spray gun kit that includes a touch-up
    spray gun as well as a fill size HVLP spray gun. Great for home workshop and professionals
    alike. Polished aluminium body with gravity feed plastic cup.

     

    Add to cartDone
  • Tork Craft Screwdriver 6 In 1 Crv Bits Per Box Of 9

    Tork Craft Screwdriver 6 In 1 Crv Bits Per Box Of 9

    R974,27


    6-in-1 Screwdriver Set 9pc Box

    <!--

    :

    -->

    <!-- -->

    This 6-in-1 screwdriver set offers exceptional utility and durability, making it an essential tool for any toolbox.
    Each screwdriver features a comfortable, ergonomic handle designed for optimal grip and torque, and comes equipped
    with six commonly used CRV (Chrome Vanadium) bits conveniently stored within the handle for quick access. This
    allows for seamless transitions between various screw types without the need to search for separate bits. Supplied
    in a box of 9 units, this bulk pack is ideal for workshops, construction sites, or retail environments, providing a
    reliable and compact solution for a wide range of fastening tasks.

    Application:

    • Fastening and loosening of various screws, bolts and studs
    • Contractor
    • DIY
    Add to cartDone

Powered by