Showing 673–688 of 4680 resultsSorted by latest
Size: 46 mm
Built to deliver professional grade performance, this 46 mm combination spanner from Tork Craft features a strong chrome-vanadium body, precision machined open end and ring end for reliable engagement of large nuts and bolts. Ideal in workshops, industrial maintenance or heavy-duty mechanical applications.
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular cutters convert a smaller area to chips, requiring less horsepower and
thrust. This feature provides longer tool life and less chatter. The slug also offers
a higher scrap value than loose chips and shavings.
Refer to the picture shown below, explaining why annular cutters are more efficient
and faster than twist drill bits.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
Size: 52 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular
cutters convert a smaller area to chips, requiring less horsepower and thrust. This
feature provides longer tool life and less chatter. The slug also offers a higher
scrap value than loose chips and shavings.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
Special hard case for transporting your laptop computer or any other flat shaped sensitive equipment. A handy carry strap is supplied and lockable with a padlock.
345 x 275 x 60 mm (OD)
The Tork Craft MX52028 SDS MAX drill bit is engineered for deep, powerful drilling in tough materials such as reinforced concrete, stone, and masonry. Its 4-cutter carbide tip and optimized flute design deliver precision, strength, and efficient dust removal, making it ideal for heavy-duty construction and installation work.
Size: 30 mm x 35 mm [3/4′ Weldon Shank]
The 30 mm diameter TCT annular cutter from Tork Craft is engineered to deliver high-efficiency holes in structural steel, plate and cast-iron. With a 35 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it creates clean, burr-reduced holes with less feed force — ideal for repetitive industrial drilling.
Size: 28 mm x 35 mm [3/4′ Weldon Shank]
The 28 mm diameter TCT annular cutter from Tork Craft is engineered for high-efficiency hole making in steel and cast-iron. With a 35 mm cutting depth and a rugged 19.05 mm (3/4″) Weldon shank, this tool delivers fast, clean broaches with minimal burrs and reduced feed pressure — ideal for workshop or site use.
Included in the set:Bi-metal hole saws:
(x1) Ø19mm
(x1) Ø22mm
(x1) Ø29mm
(x1) Ø38mm
(x1) Ø44mm
(x1) Ø57mm
Adaptors:
(x1) 3/8′ Hex HSS adaptor Ø19-29mm
(x1) 7/16′ Hex HSS adaptor ø38-57mm
(x1) Hex key for replacing pilot drill bit
(x1) Adaptor 1/2-20UNF – 5/8-18UNF
INFO:
The set includes a storage case for transport.
Application:The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
Contents: 200 pieces per box
These Tork Craft yellow bullet-shaped foam ear plugs deliver a high SNR 33 noise reduction rating, ideal for dusty, noisy job-site, construction, manufacturing or maintenance environments. The soft PU foam expands gently to conform to the ear canal, offering comfortable and reliable hearing protection for long shifts.
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular cutters convert a smaller area to chips, requiring less horsepower and
thrust. This feature provides longer tool life and less chatter. The slug also offers
a higher scrap value than loose chips and shavings.
Refer to the picture shown below, explaining why annular cutters are more efficient
and faster than twist drill bits.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
Industrial grade vacuum brazed cutting disc for Metal Cutting. It is suitable
for both ferrous and non-ferrous metals. Segmented disc which helps to extract cutting
dust and cool the blade. These segments also offer the blade a little flexibility to prevent
cracks developing when used in demanding conditions.
ANNULAR HOLE CUTTER HSS 34 X 30MM WELD SHANK 19.05MM
Industrial-grade 22.0 mm high-speed steel (HSS) twist drill bit with a Morse Taper 2 (MT2) shank. Designed for secure taper mounting in MT2 taper sockets and suited for high-precision, heavy-duty drilling operations in steel, cast iron, aluminium, plastics, and general workshop environments.
Core diameter: Ø125mm
Depth: 72mm
Adaptor thread: M22
The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.
Make sure to use the correct adaptor, length and thread for the
hollow core bit.
TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.
This will prolong the life of the core bit and the pilot drill bit.
TC322215 – SDS Plus adaptor 110mm x M16
TC322237 – SDS Plus adaptor 110mm x M22
TC322239 – Hex adator 110mm x M22
TC322216 – 13mm Hex adaptor 110mm x M16
TC322218 – SDS Plus adaptor 200mm x M16
TC322219 – 13mm Hex adaptor 200mm x M16
TC322222 – SDS Max adaptor 200mm x M16
TC322225 – SDS Plus adaptor 200mm x M22
TC322240 – 13mm Hex adaptor 200mm x M22
CAUTION:
The core bit should always be used with the supplied pilot drill bit.
The
replacement pilot bit is
TC322217 (short) for the TC322 core bits and
TC323999 (long) for the TC323 core bits.
TC322223 – SDS Plus adaptor 300mm x M16
TC322224 – 11mm Hex adaptor 300mm x M16
TC322228 – SDS Plus adaptor 300mm x M22
TC322241 – Hex adaptor 300mm x M22
TC322243 – SDS Max adaptor 300mm x M22
TC322233 – SDS Plus adaptor 400mm x M22
TC322234 – SDS Max adaptor 300mm x M22
TC322238 – SDS Plus adaptor 450mm x M22
TC322242 – 13mm Hex adaptor 450mm x M22
TC322246 – SDS Plus adaptor 450mm x M22
Weight: 3.6kg
Length 900 mm
Application:
The Tork Craft Hammer Sledge has a large, flat, metal head, attached to a long fibreglass handle. The long handle combined with a heavy head allows the sledgehammer to gather momentum during a swing and apply a larger force of impact compared to hammers designed to drive nails.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
No products in the cart.