Showing 865–880 of 4680 resultsSorted by latest
The Tork Craft TCIM31037 is a professional-grade deep impact socket sized at 37 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.
Heavy-duty 19.0 mm high-speed steel (HSS) drill bit with a 135° split point self-centering tip for clean starts and minimal walking. The reduced shank makes it usable in standard chucks that can’t grip full-diameter bits. Ideal for use in steel, cast iron, aluminium, plastics and general workshop applications.
Heavy-duty 18.5 mm high-speed steel (HSS) drill bit engineered for professional metal drilling. Features a precision-ground 135° split point for accurate, self-centering starts with minimal wandering. The reduced shank design enables use with standard 13 mm chucks, perfect for workshop and industrial applications on steel, cast iron, aluminium and plastics.
Industrial Quality
5/8"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Industrial Quality ½"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Industrial Quality
3/8"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Industrial Quality
5/16"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Industrial Quality
¼"
Most mortisers are equipped to handle 1/4′, 3/8′, 1/2′ and 5/8†square chisels.
Converted to metric: 6,35mm, 9,5mm, 12,7mm and 15,9mm.
Some
are even capable of handling a 3/4′ chisel, but keep in mind that this is a
pretty healthy chunk to cut at one time and may require a lot of physical
exertion. Remember that even if you’re cutting a mortise that is 3/4′ wide, you
don’t need to cut the entire width in one pass. A few cuts down one side of the
mortise and then back up the other with a 1/2′ chisel will be just as effective
and not nearly as taxing on you as the operator.
Size: 44 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Professional die grinder giving complete flexibility for most steel cutting needs.
The die grinder has non-variable speed set to 20 000 rpm.
A compressor is required with an air flow delivery of at least 128 l/min at
6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT
OIL).
Ø76mm Cutting disc for die grinder:
Diameter: 20mm
Full Length: 520mm
Drilling Depth: 400mm
A SDS MAX Cross Head Double Flute Drill Bit is a specialized tool designed for heavy-duty drilling applications.
These bits are ideal for professionals who need a powerful and versatile tool for demanding drilling tasks.
At a Glance: 75mm extension with 19.05mm x 19.05mm sizing for extra reach when using annular cutters.
The Tork Craft TCAC0007 annular cutter extention gives you extra working length when the job site refuses to be friendly. With a 75mm extension length and 19.05mm x 19.05mm sizing, it’s designed to help you reach into recessed areas, work around brackets and flanges, and improve access when drilling in tight or obstructed positions. Ideal for steel fabrication and magnetic drill applications where accuracy depends on keeping the tool square to the workpiece, this extension helps you extend reach cleanly—without sacrificing stability or resorting to risky angles.
Adds extra working length to compatible annular cutter arrangements, improving access in restricted drilling positions while helping maintain alignment.
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal point of these concerns is the twist drill’s most noticeable feature;
its point. This is not really a point at all, but the tangent line where two cutting
angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
zone causes the surface speed of the cutting edges to drop to zero.
The lower surface speed reduces cutting efficiency and requires increased thrust,
or feed pressure, for the cutting edges to push through the material.
Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
your cutting speed by up to 3 times while getting a longer tool life, a more accurate
hole, a better finish, with no burrs. The cutting edges distribute the cutting load
evenly, thus making it faster cutting.
Annular
cutters convert a smaller area to chips, requiring less horsepower and thrust. This
feature provides longer tool life and less chatter. The slug also offers a higher
scrap value than loose chips and shavings.
Definition – Annular
‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus
Size: 43 mm
Shank: 3/4 inch
Application:
The TorkCraft 6PT Impact sockets are designed to cope with the vibration
caused by the impact of the hammer on the anvil, inside
the impact wrench, as well as the greater levels of
torque this can generate where an ordinary socket is
likely shatter.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Size: 185 mm diameter [Bore options: 20 mm / 16 mm]
This 185 mm Tork Craft Euro-Tip circular saw blade provides a versatile professional-grade solution for wood and composite board cutting. Featuring 48 precision carbide-tipped teeth, and bore options for 20 mm or 16 mm arbors, it’s designed for cleaner, faster cuts across sheet material, structural timber and other general woodworking tasks.
Premium waterproof sand paper.
SIZE: 230mm x 280mm
GRIT: P1500
ABRASIVE: Silicon carbide
BACKING: Latex
These sand paper sanding sheets are made with silicon carbide
abrasives for use on:
Subtotal: R172,00
Tork Craft Tin Snip 260Mm Right & Straight Cut Green