Showing 1073–1088 of 4680 resultsSorted by latest

  • Tork Craft 35Mm 3/4' Drive 6Pt Impact Socket

    Tork Craft 35Mm 3/4′ Drive 6Pt Impact Socket

    R359,55

    TorkCraft – Drive 6PT Impact Socket

    Size: 35 mm
    Shank: 3/4 inch

    Application:

    The TorkCraft 6PT Impact sockets are designed to cope with the vibration
    caused by the impact of the hammer on the anvil, inside
    the impact wrench, as well as the greater levels of
    torque this can generate where an ordinary socket is
    likely shatter.

    • To be used wirth powered impact wrenches or drivers
    • The combination of an impact wrench and impact socket can deliver
      greater torque to the head of a fastner than can be achieved with a manual
      wrench
    • Sockets are hardened abd tempered
    • Hardened to 40 – 50 HRC on rockwell scale

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Precision-Max Step Point 4.5Mm Hss Drill 10 Pack

    Tork Craft Precision-Max Step Point 4.5Mm Hss Drill 10 Pack

    R358,29

    Tork Craft Precision-Max Step Point Drill — 4.5 mm HSS (10-Piece Pack)

    Engineered for consistent performance, this 10-bit pack of 4.5 mm HSS step-point drills offers reliability in steel, aluminium, plastics and sheet metals. The self-centering geometry helps improve entry accuracy and reduce walking even on smooth surfaces.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 18 X 30Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 18 X 30Mm Weld Shank 19.05Mm

    R357,40

    Annular Cutters 30mm

    Annular Cutter: Ø 18
    mm

    ANNULAR HOLE CUTTER HSS 38 X 30MM BROACH SLUGGER BITOne
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular
    cutters convert a smaller area to chips, requiring less horsepower and thrust. This
    feature provides longer tool life and less chatter. The slug also offers a higher
    scrap value than loose chips and shavings.

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft 23Mm 3/4' Drive 6Pt Deep Impact Socket

    Tork Craft 23Mm 3/4′ Drive 6Pt Deep Impact Socket

    R357,10

    Tork Craft Impact Socket — 23 mm, ¾″ Drive, 6-Point Deep (Model TCIM31023)

    The Tork Craft TCIM31023 is a professional-grade deep impact socket sized at 23 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.

    Add to cartDone
  • Tork Craft 22Mm 3/4' Drive 6Pt Deep Impact Socket

    Tork Craft 22Mm 3/4′ Drive 6Pt Deep Impact Socket

    R357,10

    Tork Craft Impact Socket — 22 mm, ¾″ Drive, 6-Point Deep (Model TCIM31022)

    The Tork Craft TCIM31022 is a professional-grade deep impact socket sized at 22 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.

    Add to cartDone
  • Tork Craft 21Mm 3/4' Drive 6Pt Deep Impact Socket

    Tork Craft 21Mm 3/4′ Drive 6Pt Deep Impact Socket

    R357,10

    Tork Craft Impact Socket — 21 mm, ¾″ Drive, 6-Point Deep (Model TCIM31021)

    The Tork Craft TCIM31021 is a professional-grade deep impact socket sized at 21 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.

    Add to cartDone
  • Tork Craft Blade Contractor 260 X 40T 30/1/20/16 Circular Saw Tct

    Tork Craft Blade Contractor 260 X 40T 30/1/20/16 Circular Saw Tct

    R356,85

    Tork Craft Contractor TCT Circular Saw Blade 260 mm × 40 T × 30/25.4/20/16 mm

    Highlights: 260 mm diameter Contractor Series blade with 40 precision-tipped carbide teeth and multi-bore fitment (30 mm, 25.4 mm/1″, 20 mm & 16 mm) via included spacers

    The Tork Craft Contractor TCT Circular Saw Blade 260 mm × 40 T × 30/25.4/20/16 mm is part of the Contractor Series—engineered for tradespeople who need a dependable blade with flexibility across their tool fleet. With 40 tungsten carbide-tipped teeth it offers efficient, reliable cutting across softwoods, selected hardwoods and wood-based panels.

    Included with this blade are reducing spacers for 1 inch (25.4 mm), 20 mm and 16 mm arbor sizes plus the primary 30 mm bore—making it highly versatile for different saw setups. As a Contractor Series blade, it is built for consistent performance under job-site and workshop conditions and should not be seen as a budget substitute.

    What is the Tork Craft Contractor Series TCT circular saw blade?

    The Contractor Series from Tork Craft is a professional-grade line designed for trade use: blades built to last, with quality carbide-tipped teeth, strong construction and broad fitment options to tackle real-world job-site and workshop demands.

    Add to cartDone
  • Tork Craft Drill Bit Hss Standard 9.5Mm Packet Of 10

    Tork Craft Drill Bit Hss Standard 9.5Mm Packet Of 10

    R356,85

    Tork Craft Drill Bit — HSS Standard 9.5 mm (Pack of 10)

    Professional-grade 9.5 mm high-speed steel (HSS) drill bits, supplied in a pack of 10 for efficient workshop and production use. These precision-ground bits deliver accurate, clean holes in steel, wood, and plastics, making them ideal for general-purpose drilling on drill presses and hand drills alike.

    Add to cartDone
  • Tork Craft Multitool Red With Nylon Pouch In Blister

    Tork Craft Multitool Red With Nylon Pouch In Blister

    R356,60

    TorkCraft – Multi-tool
    with Nylon Pouch

    Outdoor | Sports | Industrial | Wood Working | Gardening | Hardware






    Application:

    The TorkCraft Compact multi-tool with nylon pouch is great for multiple
    tasks, it has up to 10x functions and is made of stainless steel blades.

    • Stainless Steel Blade
    • For multiple tasks
    • 10x Functions
    • Compact

    Functions:

    1. Spring loaded pliers
    2. Wire cutters and stripper
    3. Phillips screwdriver
    4. Flat screwdriver
    5. File
    6. Normal knife
    7. Saw
    8. Bottle/Can opener
    9. Reamer
    10. Serated blade/ruler

    TIP: Compact mini multi-tool with included LED flash
    light and nylon pouch
    for easy storage and carrying

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Annular Hole Cutter Hss 17 X 30Mm Weld Shank 19.05Mm

    Tork Craft Annular Hole Cutter Hss 17 X 30Mm Weld Shank 19.05Mm

    R356,20

    Annular Cutters 30mm

    Annular Cutter: Ø 17
    mm

    ANNULAR HOLE CUTTER HSS 38 X 30MM BROACH SLUGGER BITOne
    way to avoid dimpling and deburring while making holes in tube and pipe is to use
    annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
    resistance to overcome.

    Using a twist drill to make holes in pipe or tubing can prompt concerns about
    the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
    drilling duration.

    The focal point of these concerns is the twist drill’s most noticeable feature;
    its point. This is not really a point at all, but the tangent line where two cutting
    angles intersect at the web of the drill, or the so-called ‘dead zone.’ This dead
    zone causes the surface speed of the cutting edges to drop to zero.

    The lower surface speed reduces cutting efficiency and requires increased thrust,
    or feed pressure, for the cutting edges to push through the material.

    Compared to traditional tooling (twist drills, etc.) annular cutters can multiply
    your cutting speed by up to 3 times while getting a longer tool life, a more accurate
    hole, a better finish, with no burrs. The cutting edges distribute the cutting load
    evenly, thus making it faster cutting.

    Annular
    cutters convert a smaller area to chips, requiring less horsepower and thrust. This
    feature provides longer tool life and less chatter. The slug also offers a higher
    scrap value than loose chips and shavings.

    Definition – Annular
    ‘Ring-shaped’ or ‘forming a ring’. From the latin word annulus

    Add to cartDone
  • Tork Craft Ratchet 250Mm 1/2' Drive Steel Handle

    Tork Craft Ratchet 250Mm 1/2′ Drive Steel Handle

    R356,15

    Tork Craft Ratchet — 250 mm, ½″ Drive, Steel Handle (Model TC67261)

    Packaging: Single tool carded or boxed — sold as each

    The Tork Craft 250 mm ratchet with ½″ drive and rugged steel handle is built for professional service and mechanical use where durability and compact length matter. Ideal for tight engine bays, plant maintenance and heavy-duty fastener systems.

    Add to cartDone
  • Fixman Flexible Ratchet Combination Wrench 25Mm

    Fixman Flexible Ratchet Combination Wrench 25Mm

    R355,00

    25 mm Flexible Ratchet
    Combination Wrench


    FIXMAN
    flexible ratchet combination wrenches are made of durable chrome vanadium steel
    (40Cr-V). The design includes a non-slip surface and micro finish. Available in
    sizes 8 to 32 mm.

    Add to cartDone
  • Tork Craft 20Mm 3/4' Drive 6Pt Deep Impact Socket

    Tork Craft 20Mm 3/4′ Drive 6Pt Deep Impact Socket

    R354,70

    Tork Craft Impact Socket — 20 mm, ¾″ Drive, 6-Point Deep (Model TCIM31020)

    The Tork Craft TCIM31020 is a professional-grade deep impact socket sized at 20 mm with a ¾″ drive square and a 6-point profile for maximum torque contact. Engineered for heavy-duty work such as automotive service, construction maintenance, and industrial equipment where recessed or stubborn fasteners are common.

    Add to cartDone
  • Tork Craft 33Mm 3/4' Drive 6Pt Impact Socket

    Tork Craft 33Mm 3/4′ Drive 6Pt Impact Socket

    R354,70

    TorkCraft – Drive 6PT Impact Socket

    Size: 33 mm
    Shank: 3/4 inch

    Application:

    The TorkCraft 6PT Impact sockets are designed to cope with the vibration
    caused by the impact of the hammer on the anvil, inside
    the impact wrench, as well as the greater levels of
    torque this can generate where an ordinary socket is
    likely shatter.

    • To be used wirth powered impact wrenches or drivers
    • The combination of an impact wrench and impact socket can deliver
      greater torque to the head of a fastner than can be achieved with a manual
      wrench
    • Sockets are hardened abd tempered
    • Hardened to 40 – 50 HRC on rockwell scale

    WARNING: Using any tool can be dangerous. Always select
    the right tool for the job.

    Add to cartDone
  • Tork Craft Quick Change Oscillating Tile Working Accessory Kit 4Pc

    Tork Craft Quick Change Oscillating Tile Working Accessory Kit 4Pc

    R354,20


    4-Piece Quick Change Oscillating Tile Working Accessory Set

    <!-- -->

    This Quick Change Oscillating Tile Working Accessory Kit is a highly specialized 4-piece collection designed to
    transform your multi-tool into a precision tiling machine. Curated specifically for bathroom and kitchen
    renovations, this kit provides the essential tools required for the unique challenges of tile installation, repair,
    and maintenance.

    The set features robust accessories engineered to withstand abrasive environments. It typically includes tools for
    removing old grout between tiles, scraping away stubborn thinset or adhesive residues, and performing precise cuts
    in cement backer board or softer ceramic tiles. The use of durable materials, such as carbide grit coatings, ensures
    these accessories maintain their performance even when grinding against hard mortar and masonry.

    Designed for maximum workflow efficiency, every component in this kit utilizes a quick change interface. This
    feature enables instant, tool-free switching between scraping, grinding, and cutting tasks, significantly reducing
    project time. This 4-piece kit is an invaluable asset for professional tilers and DIY renovators looking for
    professional results with their oscillating tools.

    Application:

    • Non-ferrous metal tube and plate cutting.
    • Hard and soft wood cutting and shaping.
    • Tile cutting and shaping.
    • Removing paint and treatment on non-ferrous metal surface.
    • Silicon and adhesive removal on wood and tiles.
    • Manufacturing
    • Construction
    • DIY
    Add to cartDone
  • Tork Craft Clamp G 3 Piece Set 50 75 & 100Mm 2 3 & 4' Kit

    Tork Craft Clamp G 3 Piece Set 50 75 & 100Mm 2 3 & 4′ Kit

    R353,65

    G-clamp set

    Clamps in the set:

    • (x1) G-clamp with 50mm clamp capacity.
    • (x1) G-clamp with 75mm clamp capacity.
    • (x1) G-clamp with 101mm clamp capacity.

    Application:

    The G-clamp is used to secure workpieces to a bench or a template during an
    assembly. It can also be used in woodwork projects to glue/join pieces of wood.

    The G-clamp is manufactured from carbon steel and has been powder coated.

    Add to cartDone

Powered by