Showing 1345–1360 of 4680 resultsSorted by latest
-
R258,80
Diameter: 12 mm
Cutting Length: 25 mm
Max Operating Speed: 65000RPM
Application:
The Tork Craft Rotary burr for cutting steel, stainless steel, cast iron,
high alloy, and brass. For a smooth surface finish. Max operating speed is
65000RPM but the recommended starting speed is 40000RPM.
- For cutting stainless steel, steel, cast iron, high alloy & brass
- Smooth surface finish
- Max Operating speed: 65 000RPM
- Recommended Operating speed: 40 000RPM
NOTE:
The recommended starting speed is 40 000 RPM
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R258,65
Tork Craft Polisher Service Kit Armature (25) For POL05
At a Glance; Genuine replacement armature (item 25) for the Tork Craft POL05 rotary polisher motor.
Put the heart back into your Tork Craft POL05 with this genuine replacement armature.
The armature is the rotating core of the motor – it works together with the stator, brushes and bearings to create the torque that drives the backing pad across the panel.
When the original armature becomes burnt, shorted, badly scored or mechanically damaged, the polisher can lose power, run very rough, overheat or refuse to start at all.
The POL05-SK06 kit provides a factory-spec armature matched to the POL05 motor design, so you can bring a tired machine back to strong, reliable daily service in panel shops and detailing bays.
-
R258,60
Tork Craft Drill Bit — HSS Standard 11.5 mm (Pack of 5)
The Tork Craft 11.5 mm HSS Standard Drill Bits deliver precision, strength, and durability for both industrial and workshop applications. Manufactured from high-speed steel (HSS), these bits offer smooth cutting and long service life when drilling steel, aluminium, wood, and plastics. Each pack contains 5 bits for efficient bulk use and reduced downtime.
-
R258,40
Carded Pack: Qty 3
Application:
- For cutting internal threads
- Standard, Pipe & metric sizes
- Produced to exacting specifications
- Rust & Tarnish resistant
- Cut cleaner more accurate threads
- Four flutes for extra chip clearance
- Right handed threaded taps in plug style
What you need to cut internal threads:
- Correct size tap
- Proper drill bit or hole
- Proper lubricant (light weight oil in ferrous metals & Paraffin or
beeswax for cutting alumnium. Do not use oil when cutting cast iron)
- Tap wrench
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R258,30
Adaptor length: 200mm
Thread: M16
Connection type: SDS Plus
Application:
This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your
rotary hammer.
Make sure the threads are the same as the Dry Cut Diamond Core Drill – M22 or
M16.
Take note that there are 2 connection types:
List of different adaptors:
1. Hex shank adaptors for the Dry Cut Diamond Core Drill range:
- Hex shank 70mm, M16 thread –
TC18HEX1
- Hex shank 200mm, M16 thread –
TC18HEX2
- Hex shank 300mm, M16 thread –
TC18HEX3
- Drift key for removing the pilot drill –
TC18KEY
- Pilot drill bit (not included with adaptors)-
TC18PILOT
2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range:
- SDS Plus 70mm, M16 thread –
TC18SDS1
- SDS Plus 200mm, M16 thread –
TC18SDS2
- SDS Plus 300mm, M16 thread –
TC18SDS3
- SDS Plus 70mm, M22 thread –
TC18SDS4
- SDS Plus 200mm, M22 thread –
TC18SDS5
- SDS Plus 300mm, M22 thread –
TC18SDS6
- Drift key for removing the pilot drill –
TC18KEY
- Pilot drill bit (not included with adaptors)-
TC18PILOT
NOTE:
The pilot drill bit is not included with the adaptors and it is available
separately –
TC18PILOT
INFORMATION:
Use the drift key
TC18KEY to remove or replace the
pilot drill bit from the adaptors.
-
R258,20
Tork Craft Impact Socket — 29 mm, ½″ Drive, 6-Point Deep (Model TCIM21029)
The Tork Craft TCIM21029 impact-rated deep socket is built for demanding tasks. Featuring a 29 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
-
R257,55
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 60
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and hardened steel.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R257,55
For use with bench grinders to grind all tempered and hardened steel.
DIAMETER: ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximise cut rate, wheel life and finish
on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled
steel.
Used for offhand grinding tempered and hardened steel.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R257,55
For use with bench grinders to grind steel
DIAMETER: ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Silicon Carbide
MAX RPM: 2100
Application:
Ideal for workshops – re-sharpening of tools e.g. chisels etc. Maximised cut rate, wheel life and finish on High-Speed Steel (HSS), High Carbon Steel (HCS), cast iron and chilled steel
Deburring steel and thread rods.
Shaping of ferrous metals (carbon steel, steel, iron, tungsten, forgings, etc.)
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R257,55
For use with bench grinders to grind all types of steel.
DIAMETER: ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 36
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R257,55
For use with bench grinders to grind all types of steel.
DIAMETER: ø200mm
WIDTH: 25mm
BORE: Ø32mm
GRIT: 60
ABRASIVE: Aluminium oxide
MAX RPM: 2100
Application:
High-quality aluminium oxide abrasives
bonded and precision-engineered to maximize cut rate, wheel life and finish
on steel, stainless steel and cast iron.
Used for offhand deburring and sharpening parts and tools on a bench grinder.
Grinding wheel supplied with bushes to accommodate other bench
grinder shaft diameters.
-
R257,55
Size: X-Large
Colour: Grey
Application:
The Tork Craft
Mechanics Gloves is made from synthetic leather and spandex, it provides a
comfortable fit, cowboy cuff & is breathable.
- Comfortable Fit
- Breathable
- Cowboy Cuff
Ideal for
- Automotive
- Hand Tools
- Mechanics
- Power Tool Use
- Gardening
NOTE:
Gloves are washable
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R257,55
Size: Medium
Colour: Grey
Application:
The Tork Craft
Mechanics Gloves is made from synthetic leather and spandex, it provides a
comfortable fit, cowboy cuff & is breathable.
- Comfortable Fit
- Breathable
- Cowboy Cuff
Ideal for
- Automotive
- Hand Tools
- Mechanics
- Power Tool Use
- Gardening
NOTE:
Gloves are washable
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R257,55
Size: Small
Colour: Grey
Application:
The Tork Craft
Mechanics Gloves is made from synthetic leather and spandex, it provides a
comfortable fit, cowboy cuff & is breathable.
- Comfortable Fit
- Breathable
- Cowboy Cuff
Ideal for
- Automotive
- Hand Tools
- Mechanics
- Power Tool Use
- Gardening
NOTE:
Gloves are washable
WARNING: Using any tool can be dangerous. Always select
the right tool for the job. This tool can get hot after use.
-
R257,00
Tork Craft TCT Circular Saw Blade — 235 × 40T × 30/16 mm (General-Purpose Combination)
Size: 235 mm diameter × 40 teeth [Bore: 30/16 mm]
A solid all-round choice for both ripping and cross-cutting, this 235 mm diameter Tork Craft blade features 40 tungsten-carbide tipped teeth and a dual-bore fit of 30 mm and 16 mm. With the balanced geometry and durable construction, it handles softwood, hardwood, plywood and laminates with dependable performance.
-
R257,00
Tork Craft TCT Circular Saw Blade — 235 × 40T × 16 mm (General-Purpose Combination)
Size: 235 mm diameter × 40 teeth [Bore: 16 mm]
A versatile all-rounder from Tork Craft: this 235 mm diameter, 40-tooth TCT blade offers a balanced solution for both ripping and cross-cutting. With a direct 16 mm bore fit, it’s ready to mount on many standard saws. The tungsten-carbide tipped teeth and stable plate provide consistent, reliable performance through softwood, hardwood, plywood and MDF.
