Showing 1441–1456 of 4680 resultsSorted by latest
High-speed steel (HSS) twist drill bits sized at 7.5 mm, supplied in a pack of 10. These precision-ground bits are ideal for accurate drilling in a variety of materials including steel, aluminium, wood and plastics—a reliable choice for workshops and production use.
Sizes: 11 x 200mm
Qty: 52 Pieces
Weight: 1 kg
Application:
The Tork Craft Hot Melt General Purpose Glue Sticks for general in-door use,
use with hot melt glue guns. General purpose indoor use Bonds, PVC, wood,
material, paper and many more. Melting temperature of 80°, preheat the glue gun for approximately 5 minutes before use.
Non-txoci with a Viscosity of 18000cps, glue cures in 15 seconds under
normal conditions.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
CAUTION: The tool can get hot after use. This tool must be used by a competent person.
Sizes: 7 x 300mm
Qty: 82 Pieces
Weight: 1 kg
Application:
The Tork Craft Hot Melt General Purpose Glue Sticks for general in-door use,
use with hot melt glue guns. General purpose indoor use Bonds, PVC, wood,
material, paper and many more. Melting temperature of 80°, preheat the glue gun for approximately 5 minutes before use.
Non-txoci with a Viscosity of 18000cps, glue cures in 15 seconds under
normal conditions.
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
CAUTION: The tool can get hot after use. This tool must be used by a competent person.
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
The continuous rim cuts the slowest of any of the different styles of diamond
cutting blades, but as a trade-off it produces the best cut. Typically, the continuous
rim is used for cutting marble, granite, porcelain tile, and ceramic tile.
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
The continuous rim cuts the slowest of any of the different styles of diamond
cutting blades, but as a trade-off it produces the best cut. Typically, the continuous
rim is used for cutting marble, granite, porcelain tile, and ceramic tile.
Hole saw diameter:
ø98mm
Use mandrel:
TC17007
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
Material: Denim
Width: 30mm
Diameter: Ø150mm
Sections: 3
Bore: Ø1/2′
Usage: Use with cutting compounds.
Different metals have varying characteristics. To achieve the best possible
result, it is essential that the correct compound and polishing buff is selected
for the job.
The cutting compound should be used on a Sisal buff
or stitched buff. A white stitched buff is ideal for cutting into
metals. With the correct compound it will remove stretcher strains, orange peel,
polishing wheel grit lines, light die marks etc.
An unstitched buff is used with polishing (finishing) compound
on metals. Each fold/leaf of
material is approximately 1mm thick.
| ORDER NO. | COLOUR | DESCRIPTION | WEIGHT |
|
RCC 20 – AB |
RED | General purpose medium cutting for brass, copper and silver. |
+/- 1.2kg |
|
RCC 11 – SD |
GREY | Finishing compound for steel, stainless steel, chrome and aluminium. |
+/- 1.3kg |
|
RCC 12 – S |
BROWN | Cutting and buffing compound for steel, stainless steel, chrome and aluminium. |
+/- 1.4kg |
|
RCC 1 SDDB |
WHITE | Bright finishing compound for stainless steel. |
+/- 1.5kg |
|
RCC G-13 |
LIGHT GREEN | Cutting compound for stainless steel, aluminium and aluminium alloys. |
900g |
|
RCC G-14 |
DARK GREEN | Finishing compound for all kinds of metals. |
900g |
|
RCC SW-1 |
PURPLE | Cutting compound for stainless steel. |
900g |
|
RCC SW-3 |
WHITE | Cutting compound for stainless steel. |
900g |
|
RCC SW-2000 |
YELLOW | Cutting compound for copper, brass, aluminium, brass and steel |
900g |
| ORDER NO. | MATERIAL | WIDTH | DIAMETER | SECTIONS | BORE |
| TCBF150-2C | DENIM | 30mm | ø150mm | 2 | ø1/2′ |
| TCBF150-3C | DENIM | 30mm | ø150mm | 3 | ø1/2′ |
| TCBF200-2C | DENIM | 20mm | ø200mm | 2 | ø1/2′ |
| TCBF100-2W | COTTON | 20mm | ø100mm | 2 | ø1/2′ |
| TCBF150-2W | COTTON | 20mm | ø150mm | 2 | ø1/2′ |
| TCBF150-3W | COTTON | 30mm | ø150mm | 3 | ø1/2′ |
| TCBF200-2W | COTTON | 20mm | ø200mm | 2 | ø1/2′ |
| TCBF200-3W | COTTON | 30mm | ø200mm | 3 | ø1/2′ |
| TCBF10030 | Buffing wheel kit ø100mm Cotton, Denim & Sisal |
ø1/2′ | |||
| TCBF15030 | Buffing wheel kit ø150mm Cotton, Denim & Sisal |
ø1/2′ | |||
| ORDER NO. | MATERIAL | WIDTH | DIAMETER | PLY | BORE |
| TCBF150-50W | COTTON | ø150mm | 50 | ø1/2′ | |
| TCBF200-50W | COTTON | ø200mm | 50 | ø1/2′ |
NOTE:
Colour (denim) buffs are coarser than white (cotton) buffs.
Size: XX-Large
Colour: Red & Black
Application:
The Tork Craft All Purpose Work gloves is made of synthetic leather and
spandex, comfortable fit, adjustable strap wrap & good wear resistance with
touch finger. Lycra panels between fingers for free movement & stretching.
Ideal for
Size: Small
Colour: Red & Black
Application:
The Tork Craft All Purpose Work gloves is made of synthetic leather and
spandex, comfortable fit, adjustable strap wrap & good wear resistance with
touch finger. Lycra panels between fingers for free movement & stretching.
Ideal for
The Tork Craft TCIM21026 impact-rated deep socket is built for demanding tasks. Featuring a 26 mm size, a ½″ drive connection and a durable 6-point design, this deep socket allows access to recessed fasteners in automotive, industrial and maintenance applications while standing up to high-torque impact tool usage.
-->
White solid cutting compound for stainless steel
The compound should be used on a Sisal buff or stitched buff. A white stitched buff is ideal for cutting into metals. With the correct compound it will remove stretcher strains, orange peel,polishing wheel grit lines, light die marks etc.
Highlights: Six high-carbon steel spade bits with 6.35 mm hex shanks, built for efficiency and cleaner holes in timber-based materials.
This Tork Craft Pro Series Spade Bit Set gives you the flexibility for a wide range of timber-boring tasks. Each bit features a hex shank that fits quick-change drill chucks for speedy bit swaps, and the spurred cutting geometry helps reduce tear-out and speed up hole drilling in materials such as hardwood, softwood, plywood, chipboard and MDF. Whether you’re running service holes, conduit channels or general timber fixings, this set ensures you have the right size at hand.
A smart investment for tradesmen, carpenters and serious DIYers who need reliable bit performance across sizes.
Size: 92 mm
Application:
Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials.
Bi-metal refers to an object that is composed of two separate metals joined together. Instead of being a mixture of two or more metals, like alloys, bimetallic objects consist of layers of different metals.
At a Glance: Inline adjustable flow control valve with 10mm push-in tube fitting and 3/8" male thread connection.
The AirCraft SG HVSF03-10 PU hose fitting valve gives you practical airflow control in pneumatic lines where a larger threaded connection is needed.
With a 10mm push-in tube connection and a 3/8" male threaded end, it’s ideal for managing air delivery to cylinders, actuators, air tools and general pneumatic circuits where smooth response and repeatable settings matter.
Adjust the control knob to fine-tune flow, reduce sudden surges, and keep air-powered equipment operating predictably.
Used as a flow control or speed controller valve, this fitting helps you restrict airflow to suit your application.
It’s especially useful for controlling actuator speed, softening tool response, or stabilising air delivery along a line.
The flow direction marking assists correct installation for consistent, predictable control.
Size: 30 mm
Drive: 1/2 inch
Application:
The Fixman drive deep socket allows you to use a socket wrench in inaccessible places, especially if you have an extension on the driver. Made of high-quality Chrome vanadium steel, increased contact area with a micro finish.
FIXMAN
reversible combination ratchet wrenches are made of durable chrome vanadium steel. The design includes
an increased working surface and micro finish. Available in sizes 6 to 32mm.
No products in the cart.