Showing 1–16 of 39 resultsSorted by latest
-
R401,50
Tork Craft Polisher Service Kit Speed Control And Capacitor (37, 40) For POL05
At a Glance; Speed control module and capacitor kit (items 37 and 40) for the Tork Craft POL05 rotary polisher.
Bring the electronics of your Tork Craft POL05 back into line with this genuine speed control and capacitor service kit.
The speed control module manages the polisher’s adjustable speed range, while the capacitor helps smooth power delivery and reduce electrical noise, so the machine starts cleanly and runs consistently under load.
When these components begin to fail, you may notice surging rpm, dead spots on the speed dial, poor low-speed control or nuisance tripping on start-up.
The POL05-SK12 kit replaces the original speed controller and its matching capacitor (items 37 and 40 on the parts diagram), restoring stable, predictable speed control for professional polishing, cutting and finishing work.
-
R292,30
Tork Craft Polisher Stator For POL06 (POL06-24)
At a Glance: Genuine replacement motor stator for the Tork Craft POL06 polisher
The Tork Craft polisher stator (Cat No. POL06-24) is a genuine replacement motor stator designed specifically for the Tork Craft POL06 polisher.
The stator is the stationary part of the motor that creates the magnetic field the rotor spins in. When it is damaged, burnt or shorted,
the machine can lose power, trip breakers or fail altogether. Replacing a faulty stator with this original POL06-24 spare restores the
electrical heart of the motor, bringing back strong, consistent performance for stainless steel, tube and general metal polishing work.
Standout feature: Factory-spec stator matched to the POL06 motor
As part of the official Tork Craft spare parts range, this stator is wound and sized to work perfectly with the POL06 rotor, housing and bearings.
It helps the polisher run at the correct speed and torque, improving reliability and keeping repairs within the original design specification.
-
R281,05
Tork Craft Polisher Service Kit Stator (23/24) For POL06
At a Glance: Genuine motor stator kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit stator (Cat No. POL06-SK07) is a genuine replacement stator designed specifically for the
Tork Craft POL06 polisher. The stator is the stationary part of the motor that creates the magnetic field for the spinning armature.
When it becomes burnt, shorted or damaged, the machine can lose power, run hot, trip breakers or stop working altogether.
Replacing it with this original POL06-SK07 stator restores the electrical core of the motor, bringing back strong, consistent
performance for stainless steel, tube and other metal polishing tasks.
Standout feature: Factory-wound stator matched to the POL06 motor
As part of the official Tork Craft spare parts range, this stator is wound, insulated and sized to match the POL06 armature,
bearings and housing exactly. That means correct fit, proper cooling and reliable power delivery within the tool’s original design limits.
-
R258,65
Tork Craft Polisher Service Kit Armature (25) For POL05
At a Glance; Genuine replacement armature (item 25) for the Tork Craft POL05 rotary polisher motor.
Put the heart back into your Tork Craft POL05 with this genuine replacement armature.
The armature is the rotating core of the motor – it works together with the stator, brushes and bearings to create the torque that drives the backing pad across the panel.
When the original armature becomes burnt, shorted, badly scored or mechanically damaged, the polisher can lose power, run very rough, overheat or refuse to start at all.
The POL05-SK06 kit provides a factory-spec armature matched to the POL05 motor design, so you can bring a tired machine back to strong, reliable daily service in panel shops and detailing bays.
-
R224,90
Tork Craft Polisher Service Kit Stator (29, 30) For POL05
At a Glance; Genuine replacement stator kit (items 29 and 30) for the Tork Craft POL05 rotary polisher motor.
Give the electrical heart of your Tork Craft POL05 a proper second life with this genuine stator service kit.
The stator is the fixed field winding that works with the armature to create the rotating magnetic field – without a healthy stator, the motor cannot deliver smooth, reliable power to your backing pad.
Heat, overload, fine dust and years of start-stop cycles can eventually damage the original stator, leading to poor torque, excessive sparking, tripping of power protection or a motor that simply refuses to run.
The POL05-SK08 kit supplies a factory-spec stator assembly (items 29 and 30 on the parts diagram), matched to the POL05 armature and housing so you can restore the motor to proper working condition.
-
R208,75
Tork Craft Polisher Service Kit Gear Box Head Cover Components (4, 6, 15, 16) For POL05
At a Glance; Front gear box head cover and related components (items 4, 6, 15, 16) for the Tork Craft POL05 polisher.
Give the front end of your Tork Craft POL05 a proper refresh with this dedicated gear box head cover component kit.
These parts form the front cover and fixings of the gear head – the section that faces the workpiece, holds key bearings and helps keep grease in while keeping dust and compound out.
After years of hard work, the head cover can suffer from knocks, stripped threads, warped faces or cracked sections, and the associated components can loosen or deform.
The POL05-SK03 kit replaces the critical front cover and its related parts (items 4, 6, 15 and 16 on the parts diagram), restoring a tight, square front end so the gears and bearings inside can do their job properly.
-
R207,95
<!--
:
-->
<!-- 
-->
The Polisher Stator for POL05 is a crucial electrical component for the Tork Craft POL05 polisher, working in
conjunction with the rotor to generate the magnetic field required for the motor’s rotation. This genuine
replacement part is engineered to fit the POL05 model precisely, ensuring a perfect fit and restoring the tool’s
original performance. A functioning stator is essential for the polisher’s motor to operate efficiently, providing
consistent power and speed. Replacing a faulty or burnt-out stator will resolve common motor issues, such as a lack
of power or complete failure to start, and is key to a reliable repair.
-
R200,75
Tork Craft Polisher Service Kit Armature Front Bearing & Screws (18–20) For POL06
At a Glance: Armature front bearing and mounting screw kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit armature front bearing & screws (Cat No. POL06-SK04) is a genuine replacement set designed specifically for the
Tork Craft POL06 polisher. The front bearing supports the nose of the armature where it enters the gearbox, while the matching screws clamp the bearing securely in place.
When this bearing wears or the fasteners become damaged, you may notice increased noise, play at the spindle or rough running. Replacing these components together
with this dedicated service kit restores smooth, accurate front support for the motor, helping your POL06 run quieter, cooler and more reliably in daily use.
Standout feature: Matched front bearing and screw set for the POL06 motor
Supplied as an original Tork Craft spare, the bearing and screws are dimensioned to work together and fit the POL06 housing correctly,
ensuring proper alignment of the armature, secure clamping and long-term durability under polishing loads.
-
R200,75
Tork Craft Polisher Service Kit Armature Rear Bearing And Holder For POL05
At a Glance; Rear motor bearing and holder kit for secure armature support on the Tork Craft POL05 polisher.
Keep the motor of your Tork Craft POL05 running smooth and controlled with this genuine rear bearing and holder service kit.
The rear bearing and its holder support the back end of the armature in the motor housing, keeping the rotor centred so it can spin freely and quietly while you polish.
As the rear bearing wears or the holder loses its grip, you may hear extra noise from the motor, feel vibration through the handle or notice that the tool just does not feel as tight as it used to.
The POL05-SK07 kit replaces both the rear bearing and its matching holder in one go, restoring proper support and alignment so your polisher feels solid and professional again.
-
R200,75
Tork Craft Polisher Service Kit Armature Front Bearing And Screws For POL05
At a Glance; Armature front bearing and mounting screw kit (items 12, 22–24) for the Tork Craft POL05 polisher.
Keep the business end of your Tork Craft POL05 motor running smooth and true with this dedicated armature front bearing and screw service kit.
The front bearing carries the armature at the gear box side of the motor, where loads and heat are highest, while the screws and related hardware hold everything firmly in position.
As the bearing wears or the fixings loosen, you will often notice increased noise, vibration and a harsher feel through the pad.
The POL05-SK05 kit brings you a genuine replacement front bearing with the correct mounting screws (items 12 and 22–24 on the parts diagram), so you can restore proper support and alignment at the front of the motor for reliable daily polishing work.
-
R198,00
Tork Craft Polisher Large Gear For POL06 (POL06-10)
At a Glance: Genuine large drive gear for the Tork Craft POL06 polisher
The Tork Craft polisher large gear (Cat No. POL06-10) is a genuine replacement spare designed specifically for the Tork Craft POL06 polisher.
This gear forms a key part of the drive system that transfers power from the motor to the polishing head.
Over time, gears can wear, chip or become noisy, which leads to poor performance and excess vibration.
Replacing the worn gear with this original part restores smooth, reliable power transmission and helps your POL06 deliver the consistent metal finishing it was built for.
Standout feature: Genuine POL06 large drive gear from the Tork Craft spare parts range
Purpose-made to match the original gear inside the POL06 polisher, this replacement large gear ensures correct fitment, proper mesh with the mating gears
and dependable performance under typical stainless steel and pipe polishing workloads.
-
R198,00
Tork Craft Polisher Large Gear For POL05
At a Glance; Main large gearbox drive gear for the Tork Craft POL05 polisher.
Keep your Tork Craft POL05 cutting and polishing like it should with this genuine large drive gear.
The large gear sits at the heart of the gearbox, transferring torque from the motor pinion to the output shaft that carries the backing pad.
After many hours of work under load, gear teeth can chip, wear or become noisy, especially if lubrication has been neglected or the tool has suffered a heavy stall.
The POL05-10 large gear restores the correct tooth profile and mesh in the gearbox so the machine runs smoother, quieter and with more confidence on paint, gelcoat and metal.
-
R57,00
Tork Craft Polisher Service Kit Switch & Trigger (33/37) For POL06
At a Glance: Complete switch & trigger replacement kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit switch & trigger (Cat No. POL06-SK10) is a genuine replacement control set designed specifically for the
Tork Craft POL06 polisher. The switch and trigger assembly is the heart of your control system – when it becomes worn, sticky or unreliable,
the tool can be frustrating or unsafe to use. This kit replaces the key switch and trigger components (positions 33 and 37 in the spare parts diagram),
restoring crisp on/off control and a comfortable trigger feel so you can focus on achieving a consistent finish on stainless steel, tube and other metal surfaces.
Standout feature: Factory-matched switch and trigger set for the POL06 control handle
As an original Tork Craft spare, POL06-SK10 is shaped and rated to suit the POL06 motor and handle layout, ensuring familiar ergonomics,
reliable switching and long-term durability under regular workshop use.
-
R57,00
Tork Craft Polisher Service Kit Switch And Trigger For POL05
At a Glance; Complete switch and trigger kit (items 38, 39) for on/off control on the Tork Craft POL05 polisher.
Keep your Tork Craft POL05 safe and easy to control with this genuine switch and trigger service kit.
The switch handles the electrical on/off function, while the trigger gives your fingers a comfortable, positive way to bring the machine to life and shut it down cleanly when the job is done.
After long service, switches can wear, arc internally or become sticky, and the trigger itself can crack, lose its feel or fail to return properly.
The POL05-SK13 kit replaces both the switch and its matching trigger (items 38 and 39 on the parts diagram) so your polisher responds crisply every time you pull – or release – the trigger.
-
R185,00
Tork Craft Polisher Service Kit Speed Control (38) For POL06
At a Glance: Genuine speed control service kit for the Tork Craft POL06 polisher
The Tork Craft polisher service kit speed control (Cat No. POL06-SK12) is a genuine replacement electronic module designed specifically for the
Tork Craft POL06 polisher. The speed controller regulates the motor speed so you can match the polishing action to the job – slow and controlled
for delicate surfaces, faster for more aggressive cutting. When this module fails, the polisher may lose variable speed, surge, run at one fixed
speed or stop working altogether. Replacing it with this original POL06-SK12 service kit restores smooth, repeatable speed control and gives new
life to a POL06 that still has a sound motor and gearbox.
Standout feature: Factory-matched speed control module for the POL06
As part of the official Tork Craft spare parts range, this speed control kit is rated and configured for the POL06 motor and electrics,
helping to maintain reliable soft-start and variable speed performance within the tool’s original design limits.
-
R169,00
Tork Craft Polisher Speed Controller For POL06 (POL06-38)
At a Glance: Genuine electronic speed controller for the Tork Craft POL06 polisher
The Tork Craft polisher speed controller (Cat No. POL06-38) is a genuine replacement electronic module designed specifically for the
Tork Craft POL06 polisher. The speed controller regulates motor speed, allowing you to match the polishing action to the job at hand.
When this module fails, the polisher may lose variable speed, surge, run only at one speed or stop working altogether.
Swapping it out with this original POL06-38 spare restores smooth, repeatable speed control so your POL06 can get back to producing
consistent finishes on stainless steel, tube and other metal surfaces.
Standout feature: Factory-matched speed control module for the POL06 polisher
As part of the official Tork Craft spare parts range, this controller is rated and configured for the POL06 motor and electronics,
helping to maintain reliable soft-start and variable-speed performance within the polisher’s designed operating range.
