Showing 17–32 of 33 resultsSorted by latest
-
R44,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 12mm (1pc Pack) (SBM1260P)
At a Glance: 1/4" Male Thread to 12mm Hose Tail – Convenient 1pc Pack
When you only need one fitting to complete an install or sort a quick repair, the AirCraft SBM1260P is the tidy, toolbox-friendly option.
This solid brass hose tail connector joins a 12mm hose to a 1/4" male threaded connection—ideal for workshop compressed air lines, compressor plumbing,
and pneumatic routing where a secure hose grip matters. Push the hose fully onto the barb, clamp it correctly, then thread the male end into a compatible
female port for a clean, serviceable connection.
Single-pack AirCraft brass connector for neat 12mm hose-to-threaded joins
The 1pc pack format makes it perfect for maintenance kits and small jobs. Brass offers good corrosion resistance in typical workshop environments and keeps
connections easy to assemble, inspect and service over time.
-
R42,00
AirCraft Brass Hose Tail Connector – 1/4" Female x 8mm (SBF1258)
At a Glance: 1/4" Female Thread x 8mm Hose Tail in Solid Brass
When you need a tidy, dependable connection between a threaded port and an 8mm hose, this AirCraft brass hose tail connector gets it done with zero fuss.
The hose tail (barb) grips the inside of the hose for a snug mechanical hold, while the 1/4" female thread makes it easy to integrate into common air line
and pneumatic setups. Perfect for quick repairs, new airline builds, and keeping your compressor lines neat and serviceable.
Solid-brass AirCraft connector for secure 8mm hose-to-threaded connections
Built for workshop practicality: a classic hose tail design that pairs best with a proper clamp, and a female threaded side that helps you connect to couplers,
regulators, manifolds or adapters. Brass resists corrosion well in typical shop environments and keeps fittings service-friendly over time.
-
R39,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 10mm (1pc Pack) (SBM1259P)
At a Glance: 1/4" Male Thread to 10mm Hose Tail – Convenient 1pc Pack
For those “just need one†jobs, the AirCraft SBM1259P gives you a solid brass hose tail connector in a convenient single-piece pack.
It joins a 10mm hose to a 1/4" male threaded connection, making it ideal for workshop compressed air lines, pneumatic tools, and custom hose assemblies.
Push the hose fully onto the tail, clamp it correctly, then thread the male end into a compatible female fitting for a neat, serviceable connection.
Single-pack AirCraft brass connector for neat 10mm hose-to-threaded joins
Perfect for toolboxes, maintenance kits, and quick repairs where you don’t want extra stock. Brass is well suited to workshop environments, offering corrosion
resistance and easy handling when assembling and troubleshooting compressed air connections.
-
R38,00
AirCraft Hose Connector Brass – 1/4" Male x 12mm (SBM1260)
At a Glance: 1/4" Male Thread to 12mm Hose Connection in Solid Brass
When you’re running a larger hose and want a dependable threaded join, the AirCraft SBM1260 is a tough, no-nonsense brass hose connector.
It connects a 12mm hose to a 1/4" male threaded port—perfect for compressor lines, workshop air systems and pneumatic routing where a secure fit matters.
Push the hose fully onto the hose tail (barb), clamp it correctly, and thread the male end into a compatible fitting for a clean, serviceable connection.
Workshop-tough brass connector for secure 12mm hose-to-threaded joins
Designed for practical air line work: the hose tail helps the hose grip firmly when clamped, while the 1/4" male thread integrates neatly with compatible
adaptors, couplers, regulators or manifolds. Brass offers corrosion resistance and keeps connections easy to assemble and maintain.
-
R125,00
AirCraft Brass Conical Straight Joint 12mm (SB6208)
At a Glance: 12mm brass conical straight joint for joining pneumatic tubing neatly
For larger pneumatic tube runs, you want a connector that stays solid, seals well and doesn’t turn into a leak point after a week of vibration.
The AirCraft SB6208 brass conical straight joint is designed to join or extend 12mm pneumatic tubing in a straight run—ideal for workshop air circuits,
machinery pneumatics and general compressed-air plumbing where a clean, serviceable connection is needed. Brass construction delivers excellent
durability and corrosion resistance, while the conical connection style is designed to seat securely when installed correctly.
AirCraft Brass Pneumatic Fittings – Strong, Tidy Connections For Tube Runs
AirCraft fittings are made for practical compressed-air connections where sealing and serviceability matter.
This 12mm straight joint keeps tubing runs neat, reduces leak risk, and supports consistent air delivery.
-
R125,00
AirCraft Brass Conical Straight Joint 10mm (SB6206)
At a Glance: 10mm brass conical straight joint for joining pneumatic tubing neatly
When your pneumatic tubing steps up in size, so do the demands on the connector—strength, sealing and reliability matter even more. The AirCraft
SB6206 brass conical straight joint is designed to join or extend 10mm pneumatic tubing in a straight run, making it ideal for workshop air circuits,
machinery control lines and general compressed-air plumbing where a clean, serviceable connection is needed. Brass construction offers excellent
durability and corrosion resistance, and the conical connection style is designed for a secure, leak-conscious fit when installed correctly.
AirCraft Brass Pneumatic Fittings – Tough, Tidy Connections For Tube Runs
AirCraft fittings are made for practical compressed-air connections where sealing and serviceability matter.
This 10mm straight joint keeps tubing runs neat, reduces leak risk, and supports consistent air delivery.
-
R114,00
AirCraft Brass Conical Straight 1/2" Tube x 1/2" M (SB6808D)
At a Glance: Conical tube-to-thread straight fitting: 1/2" tube to 1/2" male connection
When you want a clean, direct connection from 1/2" pneumatic tubing into a matching 1/2" threaded port, this fitting keeps things simple,
strong and leak-conscious. The AirCraft SB6808D brass conical straight fitting adapts 1/2" tubing to a 1/2" male thread in a straight-through
layout—ideal for workshop air circuits, manifolds, machinery pneumatics and general compressed-air plumbing where a compact, serviceable join matters.
Brass construction delivers durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing
when installed correctly.
AirCraft Brass Conical Tube Fittings – Big Tube, Clean Port Connections
AirCraft tube fittings are built for practical pneumatic layouts where sealing and serviceability matter.
This straight connector gives you a tidy 1/2" tube to 1/2" port connection with minimal bulk and a solid, workshop-ready finish.
-
R108,00
AirCraft Brass Conical Straight 3/8" Tube x 1/2" M (SB6806D)
At a Glance: Conical tube-to-thread straight fitting: 3/8" tube to 1/2" male connection
When a 3/8" pneumatic tube run needs to connect into a larger 1/2" threaded port, you want a fitting that does it cleanly—no adaptor stacks,
no awkward angles. The AirCraft SB6806D brass conical straight fitting provides a compact tube-to-thread connection in a straight-through layout,
adapting 3/8" tubing to a 1/2" male thread. It’s ideal for manifolds, air preparation units, workshop air circuits and general compressed-air
plumbing where you want a tidy, serviceable connection with reliable sealing when installed correctly.
AirCraft Brass Conical Tube Fittings – Neat Step-Up Connections
AirCraft tube fittings are built for practical pneumatic installations where sealing and serviceability matter.
This straight connector gives you a clean transition from 3/8" tubing to a 1/2" male-thread port with minimal bulk.
-
R103,00
AirCraft Brass Conical Straight Joint 8mm (SB6205)
At a Glance: 8mm brass conical straight joint for joining pneumatic tubing neatly
When you want a tidy, dependable join in a pneumatic tube run, the right fitting saves time and keeps your system leak-conscious. The AirCraft SB6205
brass conical straight joint is designed to join or extend 8mm pneumatic tubing in a straight line—ideal for workshop air circuits, control lines and
compact pneumatic assemblies. Brass construction offers durability and corrosion resistance, while the conical style connection is designed for a
secure fit when installed correctly.
AirCraft Brass Pneumatic Fittings – Clean Tube Connections That Last
AirCraft fittings are made for practical compressed-air connections where sealing and serviceability matter.
This 8mm straight joint helps keep tubing runs neat and supports consistent air delivery.
-
R86,00
AirCraft Brass Conical Straight 1/2" Tube x 3/8" M (SB6808C)
At a Glance: Conical tube-to-thread straight fitting: 1/2" tube to 3/8" male connection
When you’re running 1/2" pneumatic tubing and need a clean connection into a 3/8" threaded port, this is the neat, no-nonsense solution.
The AirCraft SB6808C brass conical straight fitting adapts 1/2" tubing to a 3/8" male thread in a straight-through layout—ideal for workshop
air circuits, manifolds, machinery pneumatics and general compressed-air plumbing where you want a compact, serviceable join. Brass construction brings
durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing when installed correctly.
AirCraft Brass Conical Tube Fittings – Big Tube, Clean Port Connections
AirCraft tube fittings are built for practical pneumatic layouts where sealing and serviceability matter.
This straight connector gives you a tidy transition from 1/2" tubing to a 3/8" male-thread port without bulky adaptor stacks.
-
R83,00
AirCraft Brass Conical Straight 1/2" Tube x 1/4" M (SB6808B)
At a Glance: Conical tube-to-thread straight fitting: 1/2" tube to 1/4" male connection
When you’re running larger pneumatic tubing and you need a clean connection into a standard port, a proper tube-to-thread fitting keeps everything
neat, strong and leak-conscious. The AirCraft SB6808B brass conical straight fitting adapts 1/2" pneumatic tubing to a 1/4" male-thread port
in a straight-through layout—ideal for workshop air circuits, manifolds, machinery pneumatics and general compressed-air plumbing. Brass construction
delivers durability and corrosion resistance, while the conical connection style is designed to seat securely for reliable sealing when installed
correctly.
AirCraft Brass Conical Tube Fittings – Big Tube, Clean Port Connection
AirCraft tube fittings are built for practical, serviceable pneumatic layouts.
This straight connector gives you a tidy transition from 1/2" tubing to a 1/4" male-thread port without bulky adaptor stacks.
-
R79,00
AirCraft Brass Conical Straight 3/8" Tube x 3/8" M (SB6806C)
At a Glance: Conical tube-to-thread straight fitting: 3/8" tube to 3/8" male connection
When your tube size and port size match, you can keep the connection beautifully simple. The AirCraft SB6806C brass conical straight fitting connects
3/8" pneumatic tubing to a 3/8" male-thread port in a straight-through layout—ideal for manifolds, air preparation units, workshop air circuits
and general compressed-air plumbing where you want a compact, serviceable connection. Brass construction delivers durability and corrosion resistance,
while the conical connection style is designed to seat securely for reliable sealing when installed correctly.
AirCraft Brass Conical Tube Fittings – Clean, Direct Tube-To-Port Connections
AirCraft tube fittings are built for practical pneumatic installations where sealing and serviceability matter.
This straight connector gives you a tidy 3/8" tube to 3/8" port connection with minimal bulk and maximum simplicity.
-
R37,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 8mm (1pc Pack) (SBM1258P)
At a Glance: 1/4" Male Thread to 8mm Hose Tail – Convenient 1pc Pack
For quick fixes and small installs where you only need one connector, the AirCraft SBM1258P is the perfect no-waste option.
This solid brass hose tail fitting joins an 8mm hose to a 1/4" male threaded connection—ideal for workshop compressed air lines,
pneumatic tools, and tidy custom hose assemblies. Push the hose fully onto the tail, clamp it correctly, then thread the male end into a compatible
female fitting for a clean, serviceable connection.
Single-pack AirCraft brass connector for neat 8mm hose-to-threaded joins
Great for toolboxes, maintenance spares, and “just need one†jobs. Brass is well suited to everyday workshop environments, offering corrosion resistance
and easy handling when assembling and troubleshooting air line connections.
-
R36,00
AirCraft Brass Conical Straight 1/4" Tube x 1/8" M (SB6804A)
At a Glance: Conical tube-to-thread straight fitting: 1/4" tube to 1/8" male connection
Need to run 1/4" pneumatic tubing into a standard 1/8" port without turning your setup into a tower of adaptors? The AirCraft SB6804A brass
conical straight fitting is the tidy answer. It connects 1/4" tubing to a 1/8" male-thread fitting in a straight-through layout, making it
ideal for compressed-air control lines, manifolds, air preparation units and general pneumatic plumbing. Brass construction provides durability and
corrosion resistance, while the conical connection style is designed to seat securely for a leak-conscious connection when installed correctly.
AirCraft Brass Conical Tube Fittings – Neat Tube-To-Port Connections
AirCraft tube fittings are built for practical, serviceable pneumatic layouts.
This straight connector gives you a clean transition from 1/4" tube to a 1/8" male-thread port without bulky adaptors.
-
R33,00
AirCraft Hose Tail Connector Brass – 1/4" Male x 6mm (1pc Pack) (SBM1257P)
At a Glance: 1/4" Male Thread to 6mm Hose Tail – Convenient 1pc Pack
For quick fixes and small installs, the AirCraft SBM1257P gives you a tough brass hose tail connector in a handy single-piece pack.
It joins a 6mm hose to a 1/4" male threaded connection, making it ideal for compact pneumatic lines, compressed air routing, and workshop maintenance.
Push the hose fully onto the tail, clamp it correctly, then thread the male end into a compatible female fitting for a neat, serviceable connection.
Single-pack AirCraft brass connector for neat 6mm hose-to-threaded joins
Perfect for toolboxes, maintenance kits, or “just need one†jobs. Brass is well suited to workshop environments, offering corrosion resistance and
easy handling when assembling and troubleshooting air line connections.
-
R31,00
AirCraft Brass Conical Straight 5/32" Tube x 1/8" M (SB6802A)
At a Glance: Conical tube-to-thread straight fitting: 5/32" tube to 1/8" male connection
When you need to connect small-bore tubing to a standard pneumatic port, a proper tube-to-thread fitting keeps the job neat and leak-conscious.
The AirCraft SB6802A brass conical straight fitting adapts 5/32" tubing to a 1/8" male-thread connection in a compact straight-through
layout—ideal for control lines, air preparation units, compact pneumatic assemblies and general compressed-air plumbing. Brass construction offers
durability and corrosion resistance, while the conical connection style is designed to seat securely when installed correctly.
AirCraft Brass Conical Tube Fittings – Clean Adaptation From Tube To Port
AirCraft tube fittings are made to keep pneumatic layouts practical and serviceable.
This straight connector gives you a tidy transition from 5/32" tube to a 1/8" male-thread port without bulky adaptors.
