Drill bits – Page 2 – Part Link

Showing 17–32 of 150 resultsSorted by latest

Tork Craft Scotch Eye Auger Bit 20Mm X 400Mm
R440,05
TorkCraft – Scotch Eye Auger Bit

Size: 20.0 x 400 mm
Shank:
Scotched Eye

Application:

An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.

For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.

For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:

A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.

The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.

NOTE: Handle is NOT included
Add to cart
Tork Craft Expansive Bit 22-76Mm For Wood
R402,05

Expansive auger bit Ø22-76mm

Application:

An expansive auger bit has an adjustable cutter, for boring holes of different
diameters.

A scale on the cutter blade indicates the diameter of the hole to be bored.

It is a must have for a woodworker who is required to drill an odd size diameter
hole.

NOTE:
Drill into an off-cut first to determine if the desired
diameter is correct.

Always keep the drill bit perpendicular to the workpiece.

Add to cart
Tork Craft Auger Bit 25 X 460Mm Pouched
R352,65
TorkCraft – Auger Bit

Diameter: 25 mm
Length: 460 mm

Application:

An auger drill bit is used to bore holes in timber. It is great for drilling holes in thatch poles to insert threaded rods.

The design is very similar to a forstner drill bit, as it ‘shaves’ itself through the wood. A low rpm rotary drill with a planetary gearbox is required to be used with auger drill bits.
- For boring in all types of wood
- Sharp screw tip for precision drilling
- Drills clean, accurate holes.
- Screw tip guides/draws bit through material easily
- Wide flute allows for effective chip removal allowing deep drilling
CAUTION:
Take care when drilling with auger drill bits. The auger drill bit tends to jerk the rotary drill when drilling. Keep the rotary drill steady with both hands to prevent wrist injury.

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
Add to cart
Tork Craft Spade Bit Set 13Pce Double Blister
R343,55
Wood spade drill bit set – Standard

Spade drill bits in the set:
- Ø6.0mm
- Ø8.0mm
- Ø10.0mm
- Ø12.0mm
- Ø13.0mm
- Ø14.0mm
- Ø16.0mm
- Ø18.0mm
- Ø19.0mm
- Ø20.0mm
- Ø22.0mm
- Ø24.0mm
- Ø25.0mm
Application:

A spade drill bit is used for rough boring in wood.

Spade drill bits can be used to drill in:
- Hard wood
- Soft wood
- Chipboard
- MDF
- Plywood
The bits in the set are 150mm long with a 6.35mm hex shank for quick
change.

Manufactured from high carbon steel. Spade bits are also known as paddle bits
or butterfly bits.

TIP:
To avoid splintering, drill the workpiece from both ends.
Add to cart
Tork Craft Drill Saw Set Hss Tin.Coated 3-4-5-6-8
R339,00
Set of Titanium coated drill saws

Drill saws in the kit:
- Ø3.0mm
- Ø4.0mm
- Ø5.0mm
- Ø6.0mm
- Ø8.0mm
Application:

Turn your electric drill into a high-speed drill saw. The drill saw is made from
HSS (hi-speed steel) coated with Titanium nitride for superior cutting speed and
edge retention.

The drill saw can be used to drill into or cut/rasp:
- Wood
- Plasterboard
- Masonry board
- Soft metals (non-hardened)
- Plastic
Use the drill saw to drill the starting hole, enlarge the hole, or cut out irregular
shaped holes with ease.
Add to cart
Tork Craft Mad Multi Angle Drill 35Mm Wood Bore Bit
R328,70
MAD drill bit

Daimeter: ø35.0mm
Shank: 3 flattened sides

Application:

A MAD bit is referred to as a Multi Angle
Drill bit.

The drill bit is designed to cut smoothly in all directions. It allows you to
have full control of the cutting path, thanks to its ingenious geometry.

Multi Angle Drill bits can cut in a curve or straight. It works great for decking,
floor boards, stair cases or even if you want to build your own pergola. It is an
addition to any woodworking project. It also gives the professional user the unique
capability to rectify misalignment errors.

The drill bit is coated with Titanium nitride to add longer life to the cutting
edges.

Used for:
- Drilling
- Routing
- Milling
- Channeling
Recommended speeds:
- Soft wood: 2400RPM
- Hard wood: 700RPM
Add to cart
Tork Craft Mad Multi Angle Drill 32Mm Wood Bore Bit
R316,75
MAD drill bit

Daimeter: ø32.0mm
Shank: 3 flattened sides

Application:

A MAD bit is referred to as a Multi Angle
Drill bit.

The drill bit is designed to cut smoothly in all directions. It allows you to
have full control of the cutting path, thanks to its ingenious geometry.

Multi Angle Drill bits can cut in a curve or straight. It works great for decking,
floor boards, stair cases or even if you want to build your own pergola. It is an
addition to any woodworking project. It also gives the professional user the unique
capability to rectify misalignment errors.

The drill bit is coated with Titanium nitride to add longer life to the cutting
edges.

Used for:
- Drilling
- Routing
- Milling
- Channeling
Recommended speeds:
- Soft wood: 2400RPM
- Hard wood: 700RPM
Add to cart
Tork Craft Adaptor Sds Plus 200Mmxm22 For Diamond Core Bits
R311,70
SDS Plus Adaptor for Diamond Core Bits

Thread size: M22
Total Length: 200mm
Classification: Industrial (Blue)

The Adaptor SDS Plus 200mm x M22 for Diamond Core Bits is an essential extension accessory designed to enhance the reach and versatility of professional drilling equipment. Unlike a standard short coupler, this adaptor provides a generous 200mm length, allowing contractors to easily core through thick walls, deep masonry, or hard-to-reach locations without requiring a specialist extra-long core bit.

Functionally, it is a robust bridge between the drill and the cutting tool. The drive end is fitted with an SDS Plus shank, ensuring a quick and secure fit into a standard rotary hammer drill. The working end features a precision-machined M22 external thread, which is compatible with a wide range of dry-cut diamond core bits used in plumbing, electrical, and HVAC installations.

Constructed from high-tensile steel, the 200mm length extension maintains rigidity under load, effectively transmitting the rotary hammer’s power and torque to the diamond segments. This configuration is indispensable for projects where deep penetration is required, ensuring that the user can drill neat, clean, and accurately placed holes while maintaining a safe and manageable operating distance.



Application:
- Fit into the diamond core bits.
- The Drift key is a wedge used to remove the pilot drill from the Dry Cut Diamond Core Drill adaptor with a hammer. See illustration below.
- Plumbing
- Electrical
- Construction
- DIY
NOTE:
The pilot drill bit is not included with the adaptors and it is available separately – TC18PILOT

INFORMATION:

Use the drift key TC18KEY to remove or replace the pilot drill bit from the adaptors.
Add to cart
Tork Craft Scotch Eye Auger Bit 14Mm X 400Mm
R304,95
TorkCraft – Scotch Eye Auger Bit

Size: 14.0 x 400 mm
Shank:
Scotched Eye

Application:

An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.

For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.

For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:

A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.

The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.

NOTE: Handle is NOT included
Add to cart
Tork Craft Scotch Eye Auger Bit 16Mm X 400Mm
R303,20
TorkCraft – Scotch Eye Auger Bit

Size: 16.0 x 400 mm
Shank:
Scotched Eye

Application:

An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.

For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.

For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:

A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.

The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.

NOTE: Handle is NOT included
Add to cart
Tork Craft Hollow Core Bit Tct 75 X 72Mm M22
R295,30
TCT hollow core bit

Core diameter: Ø75mm
Depth: 72mm
Adaptor thread: M22

Application:

The hollow core bits are designed to be used with rotary hammers. It is used
for boring out holes from Ø20 – Ø125mm in brickwork or
aerated concrete.

Make sure to use the correct adaptor, length and thread for the
hollow core bit.

Features:
- The core bit has tungsten carbide teeth and a hardened steel body for
  maximum durability.
- There are various adaptors available to fit on different rotary hammers
  (sold seperately).
- There is a 72mm or 150mm length
  available.
Adaptors according to length:

110mm

TIP:
Clean out the hole by retracting the drill often to remove dust while drilling.

This will prolong the life of the core bit and the pilot drill bit.

TC322215 – SDS Plus adaptor 110mm x M16

TC322237 – SDS Plus adaptor 110mm x M22

TC322239 – Hex adator 110mm x M22

TC322216 – 13mm Hex adaptor 110mm x M16

200mm

TC322218 – SDS Plus adaptor 200mm x M16

TC322219 – 13mm Hex adaptor 200mm x M16

TC322222 – SDS Max adaptor 200mm x M16

TC322225 – SDS Plus adaptor 200mm x M22

TC322240 – 13mm Hex adaptor 200mm x M22

CAUTION:
The core bit should always be used with the supplied pilot drill bit.

The
replacement pilot bit is

TC322217 (short) for the TC322 core bits and

TC323999 (long) for the TC323 core bits.

300mm

TC322223 – SDS Plus adaptor 300mm x M16

TC322224 – 11mm Hex adaptor 300mm x M16

TC322228 – SDS Plus adaptor 300mm x M22

TC322241 – Hex adaptor 300mm x M22

TC322243 – SDS Max adaptor 300mm x M22

400mm

TC322233 – SDS Plus adaptor 400mm x M22

TC322234 – SDS Max adaptor 300mm x M22

450mm

TC322238 – SDS Plus adaptor 450mm x M22

TC322242 – 13mm Hex adaptor 450mm x M22

TC322246 – SDS Plus adaptor 450mm x M22

A kit is also available
–

TC322010

Contents of kit
in aluminium case:
- (x1) Ø35mm x 72mm hollow core bit
- (x1) ø50mm x 72mm hollow core bit
- (x1) ø65mm x 72mm hollow core bit
- (x1) ø80mm x 72mm hollow core bit
- (x1) ø100mm x 72mm hollow core bit
- (x1) SDS Plus adaptor 100mm
- (x1) SDS Plus adaptor 300mm
- (x1) SDS Max adaptor 300mm
- (x1) Pilot drill bit and bolt
Add to cart
Tork Craft Expansive Bit 15-45Mm For Wood
R290,00

Expansive auger bit Ø15-45mm

Application:

An expansive auger bit has an adjustable cutter, for boring holes of different
diameters.

A scale on the cutter blade indicates the diameter of the hole to be bored.

It is a must have for a woodworker who is required to drill an odd size diameter
hole.

NOTE:
Drill into an off-cut first to determine if the desired
diameter is correct.

Always keep the drill bit perpendicular to the workpiece.

Add to cart
Tork Craft Adaptor Hex 450Mmxm22 For Tct Core Bits
R267,80
Adaptor for TCT hollow core bit

Adaptor length: 450mm
Thread: M22
Connection type: 13mm Hex

Application:

This is a Hex adaptor to connect the TCT hollow core bit to your rotary hammer
drill.

Make sure the threads are the same as the hollow core bit – M22 or M16.

Take note that there are 3 different hex shanks:
- 11mm Hex
- 13mm Hex
- Hex
List of adaptors in Hex:

TC322239 – Hex adator 110mm x M22

TC322241 – Hex adaptor 300mm x M22

TC322216 – 11mm Hex adaptor 110mm x M16

TC322224 – 11mm Hex adaptor 300mm x M16
TC322226 – 13mm Hex adaptor 110mm x M16

TC322219 – 13mm Hex adaptor 200mm x M16

TC322240 – 13mm Hex adaptor 200mm x M22

TC322242 – 13mm Hex adaptor 450mm x M22
Add to cart
Tork Craft Spot Weld Drill 8 X 40Mm
R267,65

Spot weld drill bit

Diameter: Ø8.0mm
Overall length: 40mm
Type: Flat shank spot weld drill bit

Application:

Spot weld drills bits are the cleanest way to remove spot welds.

Some pneumatic tool manufacturers have a specialised spot weld drill with a
C-frame anvil. The anvil has adjustable depth, so it will cut through one layer
of metal and stop without cutting into the second layer.

TIP:
Drill bits last longer when a coolant/lubricant is applied. We recommend using

CT-90.

Add to cart
Tork Craft Adaptor Sds Plus 200Mmxm16/ 18 Diamond Core Bits
R258,30
Adaptor – SDS Plus shank

Adaptor length: 200mm
Thread: M16
Connection type: SDS Plus

Application:

This is a SDS Plus adaptor to connect the Dry Cut Diamond Core Drill to your
rotary hammer.

Make sure the threads are the same as the Dry Cut Diamond Core Drill – M22 or
M16.

Take note that there are 2 connection types:
- Hex
- SDS Plus
List of different adaptors:

1. Hex shank adaptors for the Dry Cut Diamond Core Drill range:
- Hex shank 70mm, M16 thread –
  
  TC18HEX1
- Hex shank 200mm, M16 thread –
  TC18HEX2
- Hex shank 300mm, M16 thread –
  TC18HEX3
- Drift key for removing the pilot drill –
  TC18KEY
- Pilot drill bit (not included with adaptors)-
  
  TC18PILOT
2. SDS Plus adaptors for the Dry Cut Diamond Core Drill range:
- SDS Plus 70mm, M16 thread –
  
  TC18SDS1
- SDS Plus 200mm, M16 thread –
  TC18SDS2
- SDS Plus 300mm, M16 thread –
  TC18SDS3
- SDS Plus 70mm, M22 thread –
  TC18SDS4
- SDS Plus 200mm, M22 thread –
  TC18SDS5
- SDS Plus 300mm, M22 thread –
  TC18SDS6
- Drift key for removing the pilot drill –
  TC18KEY
- Pilot drill bit (not included with adaptors)-
  
  TC18PILOT
NOTE:
The pilot drill bit is not included with the adaptors and it is available
separately –

TC18PILOT

INFORMATION:
Use the drift key
TC18KEY to remove or replace the
pilot drill bit from the adaptors.
Add to cart
Tork Craft Scotch Eye Auger Bit 8Mm X 400Mm
R246,10
TorkCraft – Scotch Eye Auger Bit

Size: 8.0 x 400 mm
Shank:
Scotched Eye

Application:

An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.

For boring a wide range of holes in hardwoods in a variety of locations,
especially when electrical power is unavailable.

For hand operations
- No drill machine
- Hand operated
- For hardwoods
- Scotched Eye Shank
- Industrial
How it works:

A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. The handle is not included.

The pilot guide is threaded to ‘pull’ the drill bit into the wood. The cutting edge forms part of the auger helix to assist the drill bit with the removal of shavings.

WARNING: Using any tool can be dangerous. Always select
the right tool for the job.

NOTE: Handle is NOT included
Add to cart

► Necessary Cookies Always Active

Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.

► Functional Cookies Remark

Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.

► Analytical Cookies Remark

Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.

► Advertisement Cookies Remark

Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.