Showing 49–64 of 65 resultsSorted by latest
-
R104,00
Hole saw diameter:
ø43mm
Use mandrel:
TC17004
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R98,00
Hole saw diameter:
ø16mm
Use mandrel:
TC17002-2
Application:
The hole saw’s cup design is manufactured from a special alloy steel and the
cutting edges are Tungsten Carbide gritted. It is specially designed to drill
into abrasive materials.
The hole saw can be used to cut into:
- Fiberglass
- Kevlar
- Asbestos
- Graphite
- Carbon
- Brick
- Tiles
- Plaster slabs
- Walls
- Light stones
- Weatherboard
IMPORTANT:
Do not use with hammer/percussion action or to drill into concrete.
-
R86,00
Sizes: 32 – 152mm
Application:
Allows for using bigger size hole saws with the smaller size mandrel,
multiple adapters can be fitted to different sizes of saws to allow quick
and easy interchange.
- Allows for using bigger size hole saws with the smaller size mandrel
- Multiple adapters can be fitted
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R81,00
Hole saw diameter:
ø32mm
Use mandrel:
TC17004
Application:
The Bi-metal hole saw’s fast cutting power lies behind its HSS (hi-speed
steel) manufactured teeth.
The teeth have been set to a variable pitch to
improve harmonic vibration and to have a better chip clearance.
The hole saw can be used to cut into:
- Aluminium
- Copper
- Mild steel (sheet metal)
- Stainless steel (sheet metal)
- Zinc
- Wood
- Drywall (plaster board)
- PVC
The Bi-metal hole saws are primarily used by electricians, plumbers,
machinists and carpenters.
Features:
- Low vibration and even cut due to the variable pitched teeth.
- Strong electron beam welded cup design with a tough alloy body for added
durability.
- Knock out hole for plug removal.
- Depth of cut: 38mm
- Long life – when used properly within the correct rpm and using a
lubricant when cutting into metals.
Lubricant tip:
Use paraffin or beeswax when cutting into aluminium. Use
CT-90 or a general-purpose lubricating oil when cutting into steel.
-
R36,00
Hole saw diameter:
ø60mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R34,00
Hole saw diameter:
ø57mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R34,00
Hole saw diameter:
ø54mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R30,00
Drill bit diameter: Ø6.35mm
Drill bit: TCT (Tungsten Carbide Tipped)
Application:
The drill bit is a replacement pilot drill bit for Tungsten Carbide Tipped
(TCT) hole saws.
Replacing the pilot drill bit:
- Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo
the grub screw securing the pilot drill bit in the mandrel.
- Replace the pilot drill bit by aligning the flat side on the shank with
the grub screw.
- Tighten the grub screw. Make sure the pilot drill bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel
to replace the pilot drill bit.
Mandrel replacement pilot drill bits:
- Ø6.35 x 115mm (extra long) for bi-metal hole saws –
TC00001
- ø6.35 x 70mm for bi-metal hole saws –
TC00002
- Tungsten Carbide Tipped (TCT) series hole saws –
TC00003
- Carbide grit hole saws –
TC00004
- Diamond coated hole saws –
TC00006
-
R30,00
Hole saw diameter:
ø48mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R28,00
Hole saw diameter:
ø44mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R28,00
Hole saw diameter:
ø41mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R27,00
Hole saw diameter:
ø38mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R26,00
Hole saw diameter:
ø35mm
Use mandrel:
TC917012
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R25,00
Hole saw diameter:
ø28mm
Use mandrel:
TC917009
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R23,00
Hole saw diameter:
ø25mm
Use mandrel:
TC917009
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
-
R21,00
Hole saw diameter:
ø22mm
Use mandrel:
TC917009
Application:
The carbon steel hole saw is covered with a black oxide finish to
prevent rust. Holes can be quickly and efficiently drilled in wood, composite
materials and plastic.
Maximum depth of cut is 19mm.
IMPORTANT:
Do not use the carbon steel hole saws for cutting into metal or steel.
