Showing 145–160 of 202 resultsSorted by latest
-
R37,00
AirCraft PU Hose Fitting Y Joint 8mm x 1/4" M BSP (SPX08-02)
At a Glance: Y-branch fitting with two 8mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX08-02 PU Hose Fitting Y Joint 8mm x 1/4" M BSP is a compact, dependable way to branch a single threaded air port into two 8mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 8mm ports and a reliable 1/4" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Push your 8mm hoses in to lock, then screw into a 1/4" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R37,00
AirCraft PU Hose Fitting Tee 8mm x 1/4" Male BSP
At a Glance: Push-in tee for 8mm pneumatic hose with 1/4" M BSP threaded connection
Split an 8mm air line cleanly while connecting into standard BSP components with the AirCraft SPB08-02 PU Hose Fitting Tee 8mm x 1/4" Male BSP. This compact tee
uses push-in ports across the tee for 8mm PU pneumatic hose, and a 1/4" BSP male threaded port for connecting directly into valves, manifolds, regulators, FRL units,
gauges or other BSP female ports. It’s ideal for tidy pneumatic layouts in automation, machinery and workshop air systems where you want a reliable branch connection that’s
easy to install and maintain.
Standout feauture or series/quality/range Push-in convenience with a 1/4" BSP threaded take-off
Perfect when your hose is 8mm but the equipment port is 1/4" BSP—this tee bridges the two neatly and reduces extra adaptors.
-
R36,00
AirCraft Elbow With O-ring 8mm-3/8" M BSP PU Hose Fitting
At a Glance: 8mm push-in tube connection to 3/8" Male BSP thread with an O-ring seal in a compact 90° elbow.
A clean 90° turn with extra sealing support for busy compressed-air systems. The AirCraft Elbow With O-ring 8mm-3/8" M BSP PU Hose Fitting connects 8mm pneumatic tubing to a 3/8" BSP female port using a quick push-in connection, keeping your air line routing neat and stress-free. The integrated O-ring supports sealing at the port face on compatible connections, helping reduce leak risk in compressors, FRLs, regulators, manifolds and pneumatic tool setups where space is tight and reliability matters.
Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings with O-Ring Seal
Quick push-in tube connection paired with an O-ring at the thread to help deliver a tidy, leak-resistant finish in compact pneumatic installations.
-
R35,00
AirCraft Red Insert T-Joint Side PU 6mm – 4mm (SG APDJ06-04)
At a Glance; Reducing side-branch tee: 6 mm main line with 4 mm branch outlet
The AirCraft SG APDJ06-04 Red Insert T-Joint Side PU 6mm – 4mm is a smart space-saver for pneumatic systems that need a smaller branch line off a larger main run. It allows a 6 mm tube line to pass through the fitting while providing a neat 4 mm side take-off—perfect for feeding a smaller valve, gauge, airbrush line, pilot line, or accessory without reworking your entire air layout. The push-in connections make installation quick and maintenance painless.
Standout feature: reducing side tee for mixed tube sizes
This side-branch tee helps you keep a stronger 6 mm main line for airflow, while stepping down to a 4 mm branch where compact routing is needed. The colour-coded (red) body makes identification easier in busy panels and workshop setups.
-
R35,00
AirCraft PU Hose Fitting Y Joint 12mm (SPY12)
At a Glance: Push-in Y-splitter for 12mm PU hose—branch one line into two in seconds.
The AirCraft SPY12 PU Hose Fitting Y Joint 12mm is a clean, compact solution for splitting a single 12mm pneumatic line into two 12mm PU hose runs. It’s ideal for workshop air routing, pneumatic control circuits, and machine installations where you want a tidy branch line without piling on adaptors. With a push-in (one-touch) design, installation is quick—push the hose in to lock, and release when you need to re-route or service. The result is a neat, service-friendly air line layout that helps keep systems organised and running smoothly.
Standout feature: All-push-in 12mm Y splitter for quick, tidy branching
No threads, no fuss—just straightforward 12mm-to-12mm branching with push-in convenience for fast installs and easy changes.
-
R35,00
AirCraft PU Hose Fitting Tee 8mm x 8mm x 1/4" BSP (SG APD08-02)
At a Glance; 8 mm tube tee with 1/4" BSP male thread for neat air line branching
The AirCraft SG APD08-02 PU Hose Fitting Tee 8mm x 8mm x 1/4" BSP is a reliable hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into equipment with a threaded port. With two 8 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your pneumatic layout compact, tidy and easy to service.
Hybrid tee: push-in tubing plus 1/4" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means fewer potential leak points and a cleaner installation overall.
-
R35,00
AirCraft PU Hose Fitting Y Joint 8mm x 1/8" M BSP (SPX08-01)
At a Glance: Y-branch fitting with two 8mm push-in outlets and a 1/8" Male BSP threaded connection.
The AirCraft SPX08-01 PU Hose Fitting Y Joint 8mm x 1/8" M BSP is a compact, dependable way to branch a single threaded air port into two 8mm PU hose lines. It’s ideal for pneumatic installations where you need to split airflow to two points—feeding twin lines, actuators, air-assist circuits, or gauges—without stacking adaptors and cluttering your layout. With push-in convenience on the 8mm ports and a reliable 1/8" Male BSP threaded connection, this Y-joint keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/8" Male BSP thread
Push your 8mm hoses in to lock, then screw into a 1/8" BSP port for a clean, compact branch connection—fast installs and tidy lines.
-
R35,00
AirCraft PU Hose Fitting Tee 8mm x 1/8" Male BSP
At a Glance: Push-in tee for 8mm pneumatic hose with 1/8" M BSP threaded connection
Branch an 8mm air line neatly while connecting into BSP equipment with the AirCraft SPB08-01 PU Hose Fitting Tee 8mm x 1/8" Male BSP. This compact tee uses push-in
ports across the tee for 8mm PU pneumatic hose, and a 1/8" BSP male threaded port for connecting directly into valves, manifolds, regulators, gauges or other BSP
female ports. It’s ideal for clean hose routing in automation, machinery and workshop air systems where you want a reliable branch connection that’s easy to install and
maintain.
Standout feauture or series/quality/range Push-in speed with a threaded take-off for system flexibility
A simple way to split an 8mm hose run and feed a threaded component—reducing extra adaptors and keeping the installation compact.
-
R35,00
AirCraft PU Hose Fitting Elbow 6mm-1/4" F BSP
At a Glance: 6mm push-in to 1/4" female BSP elbow—clean 90° routing with a secure threaded connection.
For a neat corner turn with dependable airflow, the AirCraft PU Hose Fitting Elbow 6mm-1/4" F BSP is a compact, practical connector built for everyday pneumatic use. It accepts 6mm PU tubing via a quick push-in connection and provides a 1/4" female BSP threaded port for linking to compatible pneumatic components and adapters. Ideal for airbrush stations, regulators, valves, manifolds and compressed-air plumbing where space is limited, this elbow design helps prevent tubing kinks and reduces strain on your ports and lines.
Standout feature: Push-in speed + 90° elbow control for smarter hose layouts
Route your line neatly, minimise stress on the tubing, and make servicing quicker—without turning your setup into a spaghetti museum.
-
R34,00
AirCraft PU Hose Fitting Tee 8mm x 8mm x 1/8" BSP (SG APD08-01)
At a Glance; 8 mm tube tee with 1/8" BSP male thread for neat, compact air line branching
The AirCraft SG APD08-01 PU Hose Fitting Tee 8mm x 8mm x 1/8" BSP is a smart hybrid connector for compressed-air systems where you need to branch an 8 mm tube line and connect into a threaded port at the same time. With two 8 mm push-in tube ports and a 1/8" BSP male thread, it’s ideal for integrating tubing runs into gauge blocks, compact valves, small manifolds and control components—keeping your air layout tidy, reliable and easy to maintain.
Hybrid tee: push-in tubing plus 1/8" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point in one compact body, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air system.
-
R33,00
AirCraft PU Hose Fitting Y Joint 4mm x 1/4" M BSP (SPX04-02)
At a Glance: Y-branch fitting with two 4mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX04-02 PU Hose Fitting Y Joint 4mm x 1/4" M BSP is a compact, workshop-ready way to branch a single air feed into two 4mm PU hose lines while screwing securely into a 1/4" BSP threaded port. It’s ideal for pneumatic systems where you need to split airflow to two lines—such as feeding two small cylinders, air-assist lines, gauges, or control circuits—without turning your installation into a maze of adaptors. With push-in speed on the 4mm ports and a dependable threaded connection, it keeps your air routing neat, serviceable, and built for quick maintenance.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Create a clean branch line in seconds—push your 4mm hoses in to lock, then use the 1/4" BSP thread for a solid connection to valves, manifolds, regulators, or equipment ports.
-
R33,00
AirCraft PU Hose Fitting Y Joint 6mm x 1/4" M BSP (SPX06-02)
At a Glance: Y-branch fitting with two 6mm push-in outlets and a 1/4" Male BSP threaded connection.
The AirCraft SPX06-02 PU Hose Fitting Y Joint 6mm x 1/4" M BSP is a compact, reliable way to branch a single air supply into two 6mm PU hose lines while screwing securely into a 1/4" BSP threaded port. It’s ideal for pneumatic systems where you need to split airflow to two points—feeding two actuators, control lines, air-assist lines, or gauges—without building a tower of adaptors. With push-in speed on the 6mm ports and a dependable threaded connection, it keeps your air routing neat, service-friendly, and quick to maintain.
Standout feature: Neat 2-way split with push-in speed + 1/4" Male BSP thread
Push your 6mm hoses in to lock, then use the 1/4" BSP thread for a solid connection to valves, manifolds, regulators, or equipment ports—clean branching without the clutter.
-
R33,00
AirCraft PU Hose Fitting Tee 6mm x 1/4" Male BSP
At a Glance: Push-in tee for 6mm pneumatic hose with 1/4" M BSP threaded connection
Split a 6mm air line cleanly while connecting into standard BSP equipment with the AirCraft SPB06-02 PU Hose Fitting Tee 6mm x 1/4" Male BSP. This compact tee uses
push-in ports across the tee for 6mm PU pneumatic hose, and a 1/4" BSP male threaded port for connecting directly into valves, manifolds, regulators, FRL units,
gauges or other BSP female ports. It’s ideal for tidy pneumatic layouts in automation, machinery and workshop air systems where reliability and easy maintenance matter.
Standout feauture or series/quality/range Push-in convenience with a 1/4" BSP threaded take-off
Perfect when your hose run is 6mm but the component port is 1/4" BSP—this tee keeps the installation compact and reduces extra adaptors.
-
R33,00
AirCraft PU Fitting Straight Stud With O-ring 10mm – 3/8" M BSP (SPC10-G03)
At a Glance: Push-in 10mm tube x 3/8" BSP male straight stud with O-ring seal for added leak control.
The AirCraft SPC10-G03 straight stud fitting is a clean, time-saving way to connect 10mm PU tubing to a larger 3/8" BSP threaded port—now with the extra confidence of an O-ring seal.
Push the tube into the quick-connect collar for a strong grip, then screw the male thread into your manifold, regulator block, compressor accessory port or pneumatic equipment.
The integrated O-ring helps seal at the port face, reducing the chance of small leaks and helping your compressed air system hold pressure more efficiently.
Standout feature: O-ring assisted sealing for a tighter 3/8" BSP connection
The built-in O-ring supports a dependable seal at the threaded port interface—ideal for maintaining consistent airflow on larger ports.
-
R33,00
AirCraft PU Hose Fitting Tee 6mm x 6mm x 1/4" BSP (SG APD06-02)
At a Glance; 6 mm tube tee with 1/4" BSP male thread for neat air line branching
The AirCraft SG APD06-02 PU Hose Fitting Tee 6mm x 6mm x 1/4" BSP is a reliable connector for building clean pneumatic layouts where you need to branch a 6 mm tube line and connect into equipment with a threaded port. With two 6 mm push-in tube ports and a 1/4" BSP male thread, it’s ideal for regulators, manifolds, valves and workshop air accessories—keeping your compressed-air setup compact, tidy and easy to service.
Hybrid tee: push-in tubing plus 1/4" BSP thread
This fitting combines tube-to-tube branching with a threaded connection point, reducing the need for extra adaptors. Fewer joins means a cleaner installation and fewer potential leak points across your air line.
-
R33,00
AirCraft Insert T-Joint Side PU 4mm (SG APDJ04)
At a Glance; Side-branch push-in tee for 4 mm pneumatic tubing
The AirCraft SG APDJ04 Insert T-Joint Side PU 4mm is made for neat, space-saving branching in small pneumatic systems. This side tee fitting lets you run a 4 mm tube line through while taking a clean side outlet for an extra tool, valve, gauge, or accessory. It’s a go-to connector for compact air layouts—airbrush stations, control panels, benches, and machinery—where fast push-in installation keeps everything tidy and easy to maintain.
Compact branching without the clutter
The side-branch tee design helps keep your tubing runs straight and organised while adding a take-off point exactly where you need it. Push-in collets grip the tube securely and release quickly for servicing or rerouting.
Alfa Sensor - inl man pressure (MAP) (4 pin) 
Alfa/Fiat Sensor - Lambda (oxygen)-upper (4 wire) 
Jeep/ Mercedes Sensor - Crankshaft (3 Pin Oval Plug) 
Alfa/Fiat/Jeep Sensor - camshaft (3 pin bottom clip)