Showing all 12 resultsSorted by latest
-
R650,57
Size: 54 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R634,80
Size: 50 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R500,14
Size: 40 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R495,10
Size: 38 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R468,15
Size: 35 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R305,70
Size: 30 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R233,33
Size: 25.4 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R228,78
Size: 25 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R199,00
Size: 22 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R158,00
Size: 20 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R110,00
Size: 16 mm
Application:
The Tork Craft Chassis Screw Sheet Metal Punch is a hand tool used to punch a
hole through sheet metal. It is a very simple tool that consists of a punch, die
and screw.
To set up the punch, first drill a pilot hole into a piece of sheet metal with a
step drill bit, place the die over the draw stud before inserting the stud
through the pilot hole. The punch is then threaded onto the tip of the draw stud
and brought close to the sheet metal.
- For cutting clean holes fast
- Cut into sheet metal up to 1.625mm mild steel
- Also for industrial use
WARNING: Using any tool can be dangerous. Always select
the right tool for the job.
-
R80,00
Tork Craft Centre Punch 5 × 10 × 100 mm (Black Finish)
Heading: 5 mm point × 10 mm diameter × 100 mm length—ideal for workshop marking and indenting
The Tork Craft TCPU05100 is a durable centre punch featuring a sharp point for precise indenting on metal surfaces and other materials to guide drilling or fabrication work.
Finished in black-oxide for corrosion resistance and minimal glare, its 100 mm length gives good reach, while the 10 mm diameter gives firm grip and control for accurate marking in workshop or industrial environments.
