Tork Craft 2 In 1 Grinding & Cutting Disc 115Mm X 2.8 X 0.22 Steel/Ss/Pva/Alu/Sto

Description

Tork Craft 2-in-1 Grinding & Cutting Disc — 115 × 2.8 × 22.23 mm

One wheel, two jobs. The Tork Craft ABR115GC combines fast cutting with controlled grinding, so you can slice, deburr and lightly
shape without swapping discs. The compact 115 mm size is ideal on handheld grinders, while the 2.8 mm
profile delivers a sweet spot of cutting speed, stability and wheel life. Standard 22.23 mm arbor fits common 4½" angle
grinders.

Specifications

Description	Spec
Brand	Tork Craft
Model / Cat No.	ABR115GC
Disc Type	Dual-purpose cut & grind wheel
Diameter	115 mm (4½")
Thickness (Kerf)	2.8 mm
Bore / Arbor	22.23 mm (7/8")
Material Suitability	Steel / general ferrous metals
Max Peripheral Speed	80 m/s (typical)
Max RPM (Ø115)	≈ 13 300 rpm
Standards	EN 12413 (bonded abrasives)
Pack Quantity	Single disc (check listing for multi-packs)
Tool Compatibility	115 mm angle grinders with guard

Features

• 2-in-1 design for both cutting and light grinding in a single disc.
• 115 mm diameter for versatile, one-handed use.
• 2.8 mm kerf balances fast penetration with edge stability.
• 22.23 mm bore — fits standard 115 mm angle grinders.
• Reinforced bonded abrasive for straight tracking and durability.
• Optimised for general steel fabrication tasks.

Benefits

• Fewer changeovers: cut and finish with one disc to save time.
• Clean, accurate cuts with reduced burr and rework.
• Smoother control in deburring and edge-break operations.

Extra Information

• Use for straight cutting and light grinding/deburring on ferrous metals.
• Maintain a shallow approach angle and steady feed — let the wheel do the work.
• Always match wheel diameter to the grinder and keep the guard fitted.

Safety

• Use with the grinder’s guard fitted; never run unguarded.
• Wear eye, face, hearing and hand protection.
• Do not exceed the disc’s rated RPM.
• Perform a brief no-load spin-up to verify secure mounting before cutting/grinding.
• Avoid side-pressure when cutting; use controlled contact when grinding.