Tork Craft 4 Flute Wood Boring Bit 16 X 400Mm

Description

Diameter: Ø16.0mm
Overall length: 400mm
Shank: 6.35mm hex for quick change

Application:

Use the 4 flute boring bit to drill into wood/timber.

A low rpm rotary drill with a planetary gearbox is required to be used with
boring bits. It is possible to use a cordless drill, but in its lowest gear.

Benefits:

• The drill spurs have 4 cutting edges that leaves a cleaner and more
  precise bored hole.
• Using the same designed screw tip as from an auger drill bit – the 4
  flute boring bit feeds itself.
• The shank can be clamped into a 6.35mm quick change chuck or a standard
  3 jaw chuck. It also prevents slipping in a chuck.
• The edges of the bit have been hardened and remains sharper for longer.
• The flutes are designed to have excellent chip/shaving clearance.
• 4 cutting edges means faster cutting and more durability.

CAUTION:
Take care when drilling with wood boring bits. Keep the rotary drill steady with
both hands to prevent wrist injury.

consider safety for your health and the people around you
General safety suggestions: It is advisable to always have the following items nearby and in a good condition Eye protection – clean and scratch free Hearing protection – quality earmuffs Dust masks – discard old and dirty masks Gloves – for easy handling of material and hand protection
Wear Gloves	Eye Protection	Hearing Protection	Dust Mask